We present an empirical relation for the penetration depths of rigid spheres impacting metallic targets at ordnance velocities. This relation was derived through 2D numerical simulations for various sphere/target pairs, that followed their penetration depths in terms of the impact velocity, the sphere/target density ratio, and the dynamic strength of the target. The numerically derived empirical relation is shown to account for test data from several publications.
ChengJCZhangSLiuSQ, et al. (2022) Ballistic impact experiments and modeling on impact cratering, deformation and damage of 2024-T4 aluminum alloy. International Journal of Mechanical Sciences224: 107312.
2.
HerrmannWWilbeckJS (1987) Review of hypervelocity penetration theories. International Journal of Impact Engineering5: 307–322.
3.
HuaJYLiuQYangH, et al. (2022) High-speed penetration of cast Mg-6Gd-3Y-0.5Zr alloy: experiments and modeling. International Journal of Mechanical Sciences241: 107942. DOI: 10.1016/j.ijmecsci.2022.107942.
4.
PartridgeWSVanfleetHBWhitedCK (1958) Crater formation in metallic targets. Journal of Applied Physiology29: 1332–1336.
5.
RosenbergZDekelE (2009) The penetration of rigid long rods – revisited. International Journal of Impact Engineering36: 551–564.
RosenbergZVayigY (2023) More on the perforation and deep penetration of metallic targets by rigid sharp-nosed projectiles. Journal of Dynamic Behavior of Materials. DOI: 10.1007/s40870-023-00393-8.
8.
RosenbergZVayigYKositskiR, et al. (2020) More on the penetration of rigid projectiles in metallic targets. International Journal of Impact Engineering146: 103713.
9.
Valerio-FloresQLMurrLEHernandezVS, et al. (2004) Observations and simulations of the low velocity-to-hypervelocity impact crater transition for a range of penetrator densities into thick aluminum targets. Journal of Materials Science39: 6271–6289.
10.
WeimannK (1974) Penetration of steel spheres in aluminum targets, EMI Report E-3/74 (in German).
