Abstract
The present study focuses on fabrication of nanofibrous membrane to filter microbial aerosols using silver nanoparticles. Nanofibrous membrane was formed with silver nanoparticles (AgNp) and polyvinyl butyral (PVB) using electro spinning technology. The optimized nanofibers were characterized for the effective formation, morphology, and thermal sensitivity using High Resolution Scanning Electron microscopy (HR-SEM), Energy dispersive X-ray spectroscopy (EDS), and Thermo gravimetric study (TGA). Chemical components present in the aqueous leaf extract that reduces the monovalent silver were identified using Fourier Transform Infrared (FT-IR) spectroscopy. HR-SEM analysis confirmed homogenous fiber diameter with smooth surface for the obtained AgNPs-PVB membranes. The PVB loaded AgNPs have shown up to 19% weight loss at 956°C which was ascertained through TGA. Microbial loading on the filter, microbial survival, filtration efficiency, and antimicrobial efficiency of the fabricated membrane were evaluated. The fabricated membrane exhibited both bacterial and fungal filtration efficiency to an extent of 98.81% and 98.85%, respectively. Experimental data were compared theoretically using predicted mathematical model that established best fitting and was highly compatible.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
