Abstract
Background. Arthrodesis of the first tarsal metatarsal joint can be accomplished in many ways. The compressive force attained between various constructs remains unclear. This study compares compression achieved through a locking/compression Lapidus plate both with and without the addition of a lag screw. Methods: A dorsal medial Lapidus/locking compression plate (Total Compression Plate System, OrthoPro, Salt Lake City, UT, now Wright Medical) was applied to one cadaveric limb, while the same plate with the addition of a 4.0-mm cannulated lag screw was applied to the contralateral limb for a total of 5 matched pairs of cadaveric specimens. Compressive force was recorded over time and compared between the constructs using a compression sensor (8” FlexiForce Resistive Force Sensor, Phidgets Inc, Calgary, Alberta, Canada). Results: Compression was maintained for 45.4 minutes in the plate only construct, and 317 minutes with the addition of the lag screw (P = .010). The mean time to 50% peak compression for the plate only construct was 4.90 minutes compared with 15.11 minutes for plate with lag screw construct (P = .012). Conclusion: The addition of a lag screw is recommended for extending the length of compression and possibly reducing nonweightbearing time and the risk of nonunion.
Get full access to this article
View all access options for this article.