Abstract
We used eight fresh cadaveric elbows to evaluate the biomechanical characteristics of the native radial head, an anatomic radial head prosthesis, and a non-anatomic radial head prosthesis using a dynamic model. The biceps, brachialis, and triceps were attached to pneumatic actuators loaded to mimic muscle force. The radiocapitellar contact pressure and area were measured in real time, and the associated curves were depicted simultaneously. No significant differences in the contact area or associated curves were found between native radial head and the anatomic radial head prosthesis. The contact pressure and associated curve for the anatomic radial head prosthesis were better than those for the non-anatomic radial head prosthesis. We conclude from this study that the contact pressure and area of the elbow with anatomic radial head prosthesis are similar to those of the native radial head. The anatomic radial head prosthesis appears to be more suitable in clinical use.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
