Restricted accessResearch articleFirst published online 2024-6
Carboxylated cellulose nanofibrils based on banana rachis as additive in oil-based emulsion coolant for effective flank wear reduction in lathe operation
Nitro-oxidized carboxylated cellulose nanofibrils (NOCNFs) from the banana rachis are employed in oil-emulsion coolant as an additive. The concentrations of NOCNF were 0.1, 0.2, 0.3 wt. %. The cutting parameters include the spindle speeds and depth of cut. The temperature and wear reduction were significant. The temperature at the tool flank decreased from 119°C to 76°C, corresponding to an 11% reduction in wear at the depth of cut co. 2 mm and spindle speed of 1330 rpm. The viscosity of the nanofluid and the corrosion of the low-carbon mild steel specimen are discussed. Arguably, a stable NOCNF nanofluid suspension is good against wear even at elevated temperatures. Interestingly, these results occurred at a lower NOCNF concentration co. 0.3% wt. compared to 1–2 wt. % from Al2O3 nanoparticles in literature. In this paper, banana rachis nanofibrils are attractive for developing of effective and environmentally friendly additives from biomass.
PrabuLSaravanakumarN. Experimental study on the anti-wear and anti-corrosive properties of the water-soluble metalworking fluid dispersed with copper and aluminium oxide nanoparticles. Mater. Res. Express2019; 6: 125022.
2.
KumarASharmaAKKativarJK. State-of-the-art in sustainable machining of different materials using nano minimum quality lubrication. Lubr2023; 11: 64.
3.
TaylorRAOtanicarTPHerukerrupuY, et al.Feasibility of nanofluid-based optical filters. Appl. Opt2013; 52: 1413–1422.
4.
MinamiI. Molecular science of lubricant additives. Appl. Sci2017; 7: 445.
5.
HewstoneR. Environmental health aspects of lubricant additives. Sci. Total Environ1994; 156: 243–254.
6.
Taha-TijerinaJAviñaKDiabbJM. Tribological and thermal transport performance of SiO2-based natural lubricants. Lubr2019; 7: 71.
7.
SharminIGafurMADharNR. Preparation and evaluation of a stable CNT-water based nano cutting fluid for machining hard-to-cut material. SN Appl. Sci2020; 2: 1–18.
8.
GanesanKBabuMNSanthanakumarM,et al.Experimental investigation of copper nanofluid based minimum quantity lubrication in turning of H 11 steel. J Braz. Soc. Mech. Sci. Eng2018; 40: 1–7.
9.
LiuGLiXQinB, et al.Investigation of the mending effect and mechanism of copper nano-particles on a tribologically stressed surface. Tribol. Lett2004; 17: 961–966.
10.
SinghVSharmaAKSahuRK, et al.State of the art on sustainable manufacturing using mono/hybrid nano-cutting fluids with minimum quantity lubrication. Mater. Manuf. Process2022; 37: 603–639.
11.
LiM-CWuQSongK, et al.Cellulose nanoparticles as modifiers for rheology and fluid loss in bentonite water-based fluids. ACS Appl Mater Interfaces2015; 7: 5006–5016.
12.
EichhornSJDufresneAArangurenM, et al.Current international research into cellulose nanofibres and nanocomposites. J. Mater. Sci2010; 45: 1–33.
13.
HuWChenSYangJ, et al.Functionalized bacterial cellulose derivatives and nanocomposites. Carbohydr. Polym2014; 101: 1043–1060.
14.
SharmaPRJoshiRSharmaSK, et al.A simple approach to prepare carboxycellulose nanofibers from untreated biomass. Biomacromolecules2017; 18: 2333–2342.
15.
SamylingamLAnamalaiKKadirgamaK, et al.Thermal analysis of cellulose nanocrystal-ethylene glycol nanofluid coolant. Int. J. Heat Mass Transf2018; 127: 173–181.
16.
CostaALRGomesATibollaH, et al.Cellulose nanofibers from banana peels as a pickering emulsifier: high-energy emulsification processes. Carbohydr. Polym2018; 194: 122–131.
17.
KolourHH. An investigation on the effects of cellulose nanofibrils on the performance of cement based composites. PhD Thesis, University of Maine, USA, 2019.
18.
LiYZhuHXuM, et al.High yield preparation method of thermally stable cellulose nanofibers. BioResour2014; 9: 1986–1997.
19.
LiM-CTangZLiuC, et al.Water-redispersible cellulose nanofiber and polyanionic cellulose hybrids for high-performance water-based drilling fluids. Ind. Eng. Chem. Res2020; 59: 14352–14363.
20.
RahmadiawanDAbralHNasruddinN, et al.Stability, viscosity, and tribology properties of polyol ester oil-based bio-lubricant filled with TEMPO-oxidized bacterial cellulose nanofiber. Int. J. Polym. Sci2021; 2021: 1–9.
21.
PääkköMAnkerforsMKosonenH, et al.Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromolecules2007; 8: 1934–1941.
22.
HenrikssonMHenrikssonGBerglundL, et al.An environmentally friendly method for enzyme-assisted preparation of microfibrillated cellulose (MFC) nanofibers. Eur. Polym. J2007; 43: 3434–3441.
23.
HubbeMATayebPJoyceM, et al.Rheology of nanocellulose-rich aqueous suspensions: a review. BioResour2017; 12: 9556–9661.
24.
SehaquiHZhouQIkkalaO, et al.Strong and tough cellulose nanopaper with high specific surface area and porosity. Biomacromolecules2011; 12: 3638–3644.
25.
Terelak-TymczynaAMiądlickiKJasiewiczM. Analysis of the turning process to optimize energy consumption. In: KrólczykGMNiesłonyPKrólczykJ (eds) International conference on industrial measurements in machining. Opole, Poland: Springer International Publishing, 2020, pp.75–84.
26.
IngaleSJoshiSJGupteA. Production of bioethanol using agricultural waste: banana pseudo stem. Braz. J. Microbiol2014; 45: 885–892.
27.
RwegasilaELiuLBerglundL, et al.Strong nanostructured films and effective lead (II) removal capacity based on nitro oxidized cellulose nanofibrils prepared from banana rachis. Cellulose2024: 1–17.
28.
MontgomeryD. Design and analysis of experiments. 8th ed. Hoboken, NJ: John Wiley & Sons, Inc, 2013.
29.
ASTM D 4627: Test method for iron chip corrosion for water-dilutable metal working fluids. ASTM International 2012.
30.
AlvesSMde OliveiraJFG. Vegetable based cutting fluid: an environmental alternative to grinding process. In: KaebernickH (ed) 15th CIRP international conference on life cycle engineering: applying life cycle knowledge to engineering solutions. Australia: The Conference, 2008, pp.664.
31.
Al-SabaghAMKhalilSAAbdelrahmanA, et al.Investigation of oil and emulsion stability of locally prepared metalworking fluids. Ind. Lubr2012; 64: 346–358.
32.
LiM-CRenSZhangX, et al.Surface-chemistry-tuned cellulose nanocrystals in a bentonite suspension for water-based drilling fluids. ACS Appl. Nano Mater2018; 1: 7039–7051.
33.
AnsariFGallandSJohanssonM, et al.Cellulose nanofiber network for moisture stable, strong and ductile biocomposites and increased epoxy curing rate. Compos. Part A Appl2014; 63: 35–44.
34.
WaltherALossadaFBenselfeltT, et al.Best practice for reporting wet mechanical properties of nanocellulose-based materials. Biomacromolecules2020; 21: 2536–2540.
35.
SaitoTUematsuTKimuraS, et al.Self-aligned integration of native cellulose nanofibrils towards producing diverse bulk materials. Soft Matter2011; 7: 8804–8809.
YanoHSugiyamaJNakagaitoAN, et al.Optically transparent composites reinforced with networks of bacterial nanofibers. Adv Mater2005; 17: 153–155.
38.
AnoopKSundararajanTDasSK. Effect of particle size on the convective heat transfer in nanofluid in the developing region. Int. J. Heat Mass Transf2009; 52: 2189–2195.
39.
BabaMTumbaCIssaA. Formulation and performance assessment of fixed oils based cutting fluids in machining operation. Int J Mech Eng2018; 7: 11–22.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
