The sorption property of porous building materials in the hygroscopic region (sorption isotherm) is an important input to hygrothermal simulation. In this study, we proposed efficient and accurate protocols to obtain sorption isotherms using the static desiccator method. We developed a calculation model for three-dimensional simultaneous heat and moisture transfer in a material corresponding to the measurement specified in ISO 12571. Using an international database of the material properties, we conducted numerical simulations of the sorption process for five types of materials. The evolution of the amount of adsorbed moisture in a specimen and the time to reach equilibrium during the measurement were calculated under various humidity levels and specimen dimensions. According to the simulated results, we improved timing and interval for weighting the specimen to confirm the attainment of equilibrium for each type of a material and for each humidity level from the viewpoint of efficiency and accuracy. Meanwhile, the influence of size of a specimen on the time necessary to obtain the results was quantitatively demonstrated. Moreover, it was demonstrated that the method used for the determination of the attainment of equilibrium provided in ISO 12571 can underestimate the moisture content of materials with low moisture content and vapor permeability, and a policy to reduce risks of the underestimation was proposed.
ASHRAE (2002) A thermal and moisture transport property database for common building and insulating materials. Final report from ASHRAE research project 1018-RP.
2.
AsphaugSKTimeBKvandeT (2021) Hygrothermal simulations of thermally insulated basement envelopes - importance of boundary conditions below grade. Building and Environment199: 107920.
3.
Astm C1498-04a (2016) Standard test method for hygroscopic sorption isotherms of building materials.
4.
BanfillPFG (2021) Hygrothermal simulation of building performance: Data for Scottish masonry materials. Materials and Structures54: 167.
5.
BaoJXueSZhangP, et al. (2021) Coupled effects of sustained compressive loading and freeze–thaw cycles on water penetration into concrete. Structural Concrete22: E944–E954.
6.
BasheerLBasheerPALongAE (2005) Influence of coarse aggregate on the permeation, durability and the microstructure characteristics of ordinary Portland cement concrete. Construction and Building Materials19: 682–690.
7.
Bauklimatik Dresden (2021) Bauklimatik Dresden: Software for Building Science. Available at: http://bauklimatik-dresden.de/delphin/ (accessed 8 July 2021).
8.
BuiRLabatMAubertJ-E (2017) Comparison of the saturated salt solution and the dynamic vapor sorption techniques based on the measured sorption isotherm of barley straw. Construction and Building Materials141: 140–151.
9.
ChallansonnexACasalinhoJPerréP (2019) Non-Fickian diffusion in biosourced materials: Experimental determination of the memory function using minute samples. Construction and Building Materials224: 560–571.
10.
ChenH-YChenC (2014) Equilibrium relative humidity method used to determine the sorption isotherm of autoclaved aerated concrete. Building and Environment81: 427–435.
11.
DelgadoJMPQRamosNMMBarreiraE, et al. (2010) A critical review of hygrothermal models used in porous building materials. Journal of Porous Media13: 221–234.
12.
EckertEDrakeRJ (1987) Analysis of Heat and Mass Transfer. New York, NY: Hemisphere Publishing.
13.
EN 15026:2007 (2007) Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation.
14.
FabbriAMcGregorF (2017) Impact of the determination of the sorption-desorption curves on the prediction of the hemp concrete hygrothermal behaviour. Construction and Building Materials157: 108–116.
15.
FabbriAMcGregorFCostaI, et al. (2017) Effect of temperature on the sorption curves of earthen materials. Materials and Structures50: 253.
16.
FengCJanssenHWuC, et al. (2013) Validating various measures to accelerate the static gravimetric sorption isotherm determination. Building and Environment69: 64–71.
17.
Fraunhofer IBP (2021) WUFI(en). Available at: https://wufi.de/en/ (accessed 7 July 2021).
18.
ISO 12571 (2013) Hygrothermal performance of building materials and products: determination of hygroscopic sorption properties.
19.
JIS A 1475:2004 (2004) Method of test for hygroscopic sorption properties of building materials.
20.
KorjenicABednarT (2011) Developing a model for fibrous building materials. Energy and Buildings43: 3189–3199.
21.
KrabbenhøftK (2004) Moisture Transport in Wood: A Study of Physical-Mathematical Models and Their Numerical Implementation. Lyngby: Technical University of Denmark.
22.
KumaranMK (1996) IEA Annex 24, Final Report, Vol. 3, Task 3: Material Properties. Leuven: Laboratorium Boufysica, Department Burgerlijke Bouwkunde, KU Leuven.
23.
KumaranMK (2006) A thermal and moisture property database for common building and insulation materials. ASHRAE Transactions112: 485–497.
24.
KünzelHM (1995) Simultaneous heat and moisture transport in building components: one- and two-dimensional calculation using simple parameters. Dissertation, Fraunhofer IRB, Germany.
25.
LuanHWuJPanJ (2020) Saline water absorption behavior and critical saturation degree of recycled aggregate concrete during freeze-thaw cycles. Construction and Building Materials258: 119640.
26.
Martínez-MariñoSEguía-OllerPGranada-álvarezE, et al. (2021) Simulation and validation of indoor temperatures and relative humidity in multi-zone buildings under occupancy conditions using multi-objective calibration. Building and Environment200: 107973.
27.
MaZTangQWuH, et al. (2020) Mechanical properties and water absorption of cement composites with various fineness and contents of waste brick powder from C&D waste. Cement and Concrete Composites114: 103758.
28.
McGregorFHeathASheaA, et al. (2014) The moisture buffering capacity of unfired clay masonry. Building and Environment82: 599–607.
29.
NakajimaMHokoiSOguraD, et al. (2020) Field survey of the relationship between environmental conditions and algal growth on exterior walls. Building and Environment169: 106575.
30.
ParrachaJLBorsoiGVeigaR, et al. (2021) Effects of hygrothermal, UV and SO2 accelerated ageing on the durability of ETICS in urban environments. Building and Environment204: 10815.
31.
PeuhkuriRHRodeCHansenKK (2005) Effect of method, step size and drying temperature on sorption isotherms. In: 7th Nordic symposium on building physics, Reykjavík, Iceland, 13–15 June 2005, pp.31–38. Reykjavík: IBRI.
32.
PromisGFreitas DutraLDouzaneO, et al. (2019) Temperature-dependent sorption models for mass transfer throughout bio-based building materials. Construction and Building Materials197: 513–525.
33.
RodeCHansenKK (2011) Hysteresis and temperature dependency of moisture sorption - new measurements. In: 9th Nordic symposium on building physics,Tampere, Finland, 29 May–2 June 2011, pp.647–654. Tampere: Tampere University of Technology.
34.
SaeidpourMWadsöL (2015) Evidence for anomalous water vapor sorption kinetics in cement based materials. Cement and Concrete Research70: 60–66.
35.
SakiyamaNRFrickJStipeticM, et al. (2021) Hygrothermal performance of a new aerogel-based insulating render through weathering: Impact on building energy efficiency. Building and Environment202: 108004.
36.
ScrivenerKLNematiKM (1996) The percolation of pore space in the cement paste/aggregate interfacial zone of concrete. Cement and Concrete Research26: 35–40.
37.
ShiLZhangHLiZ, et al. (2018) Analysis of moisture buffering effect of straw-based board in civil defence shelters by field measurements and numerical simulations. Building and Environment143: 366–377.
38.
TadaSWatanabeK (2005) Dynamic determination of sorption isotherm of cement based materials. Cement and Concrete Research35: 2271–2277.
39.
WadsöL (1994) Describing non-Fickian water-vapour sorption in wood. Journal of Materials Science29: 2367–2372.
40.
WangYCaoYZhangP, et al. (2019) Water absorption and chloride diffusivity of concrete under the coupling effect of uniaxial compressive load and freeze–thaw cycles. Construction and Building Materials209: 566–576.
41.
WanHHuangGLiuS, et al. (2021) Optimal moisture buffering thickness of the hygroscopic material layer: Modeling and derivation. Building and Environment205: 108257.
42.
WoloszynMKalameesTOlivier AbadieM, et al. (2009) The effect of combining a relative-humidity-sensitive ventilation system with the moisture-buffering capacity of materials on indoor climate and energy efficiency of buildings. Building and Environment44: 515–524.
43.
WuQRougelotTBurlionN, et al. (2015) Representative volume element estimation for desorption isotherm of concrete with sliced samples. Cement and Concrete Research76: 1–9.
44.
YamadaKIbaCUnoT, et al. (2020) Investigation on the deterioration mechanism of tuff stones used for the exteriors at the former Koshien Hotel. E3S Web of Conferences172: 20008.
45.
YangLLiuGGaoD, et al. (2021) Experimental study on water absorption of unsaturated concrete: w/c ratio, coarse aggregate and saturation degree. Construction and Building Materials272: 121945.
46.
ZhangKRichmanR (2020) Variability in moisture sorption isotherms of plywood and oriented strand board with accelerated ageing. Canadian Journal of Civil Engineering48: 1–7.
47.
ZhangKRichmanR (2021) Wood sheathing durability from moisture sorption isotherm variability due to age and temperature. Construction and Building Materials273: 121672.
48.
ZhangPWittmannFHVogelM, et al. (2017) Influence of freeze-thaw cycles on capillary absorption and chloride penetration into concrete. Cement and Concrete Research100: 60–67.
49.
ZhangXZilligWKünzelHM, et al. (2016) Combined effects of sorption hysteresis and its temperature dependency on wood materials and building enclosures – Part I: Measurements for model validation. Building and Environment106: 143–154.
50.
ZhaoPZhangXQinL, et al. (2019) Conservation of disappearing traditional manufacturing process for Chinese grey brick: Field survey and laboratory study. Construction and Building Materials212: 531–540.
