Abstract
Residential and commercial buildings together account for one-third of world’s final energy consumption, thus making energy management in buildings of considerable significance. Passive design concept that depends on climate and location can be used as an effective and economical method to reduce the energy consumption in buildings. Seven cities in India, each representative of different geographic and climatic conditions, were selected for analysis. This article studies how the peak cooling and heating load are affected by varying some of the passive design parameters for each of the seven cities. The parameters varied are wall insulation thickness, roof insulation thickness, overhang depth, window orientation, and window-to-wall ratio. Results show that optimized passive design could reduce the peak cooling and heating loads by about 50%. Shading reduces cooling loads but is found to increase heating loads. In some of the locations, both heating in winter and cooling in summer are needed and designers should adopt appropriate passive measures depending on the location. Also for the same building, evaluation of shading is done in the context of lighting energy savings. An algorithm has been developed to iteratively alter and analyze set of roller blind positions to maintain visual comfort; as a result, the corresponding potential annual energy savings due to lighting were estimated. It was also observed that even after providing visual comfort to the occupants, energy savings only reduced by approximately 1% as compared to the case when visual comfort was overlooked.
Get full access to this article
View all access options for this article.