While window frames typically represent 20—30% of the overall window area, their impact on the total window heat transfer rates may be much larger. This effect is even greater in low-conductance (highly insulating) windows that incorporate very low-conductance glazing. Developing low-conductance window frames requires accurate simulation tools for product research and development. Based on a literature review and an evaluation of current methods of modeling heat transfer through window frames, we conclude that current procedures specified in ISO standards are not sufficiently adequate for accurately evaluating heat transfer through the low-conductance frames.
We conclude that the near-term priorities for improving the modeling of heat transfer through low-conductance frames are:
1. Add 2D view-factor radiation to standard modeling and examine the current practice of averaging surface emissivity based on area weighting and the process of making an equivalent rectangular frame cavity.
2. Asses 3D radiation effects in frame cavities and develop recommendation for inclusion into the design fenestration tools.
3. Assess existing correlations for convection in vertical cavities using CFD.
4. Study 2D and 3D natural convection heat transfer in frame cavities for cavities that are proven to be deficient from item 3 above. Recommend improved correlations or full CFD modeling into ISO standards and design fenestration tools, if appropriate.
5. Study 3D hardware short-circuits and propose methods to ensure that these effects are incorporated into ratings.
6. Study the heat transfer effects of ventilated frame cavities and propose updated correlations.
Arasteh, D.K., Finlayson, E., Curcija, D., Baker, J. and Huizenga, C. (1998). Guidelines for Modeling Projecting Fenestration Products, ASHRAE Transactions, 104(1): 856-860.
2.
Batchelor, G.K. (1954). Heat Transfer by Free Convection Across a Closed Cavity between Vertical Boundaries at Different Temperatures, Quarterly Applied Mathematics, 12: 209-233.
3.
Berkovsky, B.M. and Polevikov, V.K. (1977). Numerical Study of Problems on High-Intensive Free Convection, In: Spalding, D.B. and Afgan, N. (eds), Heat Transfer and Turbulent Buoyant Convection, Vol. II, pp. 443-455, Hemisphere Publishing Corporation, Washington.
4.
Blomberg, T. (2000). HEAT2, A PC-program for heat Transfer in Two Dimensions. Manual with Brief Theory and Examples. Version 5.0, Lund University, Lund, Sweden.
5.
Branchaud, T.R., Curcija, D. and Goss, W.P. (1998). Local Heat Transfer in Open Frame Cavities of Fenestration Systems, In: Thermal Performance of the VII Exterior Envelopes of Buildings, American Society of Heating, Refrigeration and Air-Conditioning Engineers, Atlanta.
6.
Carpenter, S.C. and Elmahdy, A.H. (1994). Thermal Performance of Complex Fenestration Systems . ASHRAE Transactions, 100(2): 1179-1186.
7.
Carpenter, S.C. and McGowan, A.G. (1989). Frame and Spacer Effects on Window U-value. ASHRAE Transactions, 95(1): 604-608.
8.
Carpenter, S.C. and McGowan, A. (1998). Three-dimensional Heat Transfer Effects in Buildingcomponents , ASHRAE Transactions, 104(1): 1070-1076.
9.
Curcija, D. and Goss, W.P. (1993). Two-dimensional Natural Convection Over the Isothermal Indoor Fenestration Surface - Finite Element Numerical Solution, ASHRAE Transactions, 99(1): 274-287.
10.
Curcija, D. and Goss, W.P. (1994). Two-dimensional Finite-element Model of Heat Transfer in Complete Fenestration Systems, ASHRAE Transactions, 100(2): 1207-1221.
11.
Eckert, E.R.G. and Carlson, W.O. (1961). Natural Convection in an Air Layer Enclosed Between Two Vertical Plates with Different Temperature, International Journal of Heat and Mass Transfer, 2(1-2): 106-120.
12.
ElSherbiny, S.M., Raithby, G.D. and Hollands, K.G.T. (1982). Heat Transfer by Natural Convection Across Vertical and Inclined Air Layers, Journal of Heat Transfer . Transactions of the ASME, 104(1): 96-102.
13.
Enermodal. (2001). Modelling Windows, Glass Doors and Other Products with FRAMEplus 5 , Enermodal Engineering, Kitchener , Ontario.
14.
Finlayson, E., Mitchell, R., Arasteh, D., Huizenga, C. and Curcija, D. (1998). THERM 2.0. Program Description. A PC Program for Analyzing the Two-dimensional Heat Transfer Trough Building Products, University of California, Berkeley.
15.
Fomichev, A., Curcija, D.C., Balagurunathan, B. and Stocki, M. (2007). Investigation of Heat Transfer Effects of Sloped and Ventilated Internal Cavities of Framing Systems, Final Report, Center for Energy Efficiency and Renewable Energy, University of Massachusetts, Amherst.
16.
Griffith, B., Curcija, D., Türler, D. and Arasteh, D.K. (1998a). Improving Computer Simulations of Heat Transfer for Projecting Fenestration Products: Using Radiation View-factor Models, ASHRAE Transactions, 104(1): 845-855.
17.
Griffith, B., Finlayson, E., Yazdanian, M. and Arasteh, D. (1998b). The Significance of Bolts in the Thermal Performance of Curtain-Wall Frames for Glazed Facades, ASHRAE Transactions , 104(1): 1063-1069.
18.
Gustavsen, A. (2001). Heat Transfer in Window Frames with Internal Cavities, PhD Thesis, Department of Building and Construction Engineering, Norwegian University of Science and Technology.
19.
Gustavsen, A., Griffith, B.T. and Arasteh, D. (2001a). Natural Convection Effects in Three-Dimensional Window Frames With Internal Cavities, ASHRAE Transactions , 107(2): 527-537.
20.
Gustavsen, A., Griffith, B.T. and Arasteh, D. (2001b). Three-dimensional Conjugate Computational Fluid Dynamics Simulations of Internal Window Frame Cavities Validated Using Infrared Thermography, ASHRAE Transactions, 107(2): 538-549.
21.
Gustavsen, A., Kohler, C., Arasteh, D. and Curcija, D. (2005). Two-Dimensional Conduction and CFD Simulations of Heat Transfer in Horizontal Window Frame Cavities, ASHRAE Transactions, 111(1): 587-598.
22.
Gustavsen, A. and Thue, J.V. (2007). Numerical Simulation of Natural Convection in Three-Dimensional Cavities with a High Vertical Aspect Ratio and a Low Horizontal Aspect Ratio, Journal of Building Physics, 30(3): 217-240.
23.
Gustavsen, A., Kohler, C., Arasteh, D. and Dalehaug, A. (2007). Two-dimensional Computational Fluid Dynamics and Conduction Simulations of Heat Transfer in Horizontal Window Frames With Internal Cavities, ASHRAE Transactions, 113(1): 165-175.
24.
Hallé, S., Bernier, M.A., Patenaude, A. and Jutras, R. (1998). The Combined Effect of Air Leakage and Conductive Heat Transfer in Window Frames and its Impact on the Canadian Energy Rating Procedure, ASHRAE Transactions, 104(1): 176-184.
25.
Hollands, K.G.T., Unny, T.E., Raithby, G.D. and Konicek, L. (1976). Free Convective Heat Transfer Across Inclined Air Layers, Journal of Heat Transfer. Transactions of the ASME, 98(2): 189-193.
26.
ISO 15099. (2003). Thermal Performance of Windows, Doors and Shading Devices-Detailed Calculations, International Organization for Standardization, Geneva .
27.
ISO 10077-1. (2006). Thermal Performance of Windows, Doors and Shutters-Calculation of Thermal Transmittance-Part 1: Simplified Method, International Organization for Standardization , Geneva.
28.
ISO 10077-2. (2003). Thermal Performance of Windows, Doors and Shutters-Calculation of Thermal Transmittance-Part 2: Numerical Method for Frames, International Organization for Standardization, Geneva.
29.
Jonsson, B. (1985). Heat Transfer trough Windows. During the Hours of Darkness with the Effect of Infiltration Ignored, Document D13:1985, Swedish Council for Building Research, Stockholm.
30.
Korpela, S.A., Lee, Y. and Drummond, J.E. (1982). Heat Transfer through a Double Pane Window, Journal of Heat Transfer. Transactions of the ASME, 104(3): 539-544.
31.
Lartigue, B., Lorente, S. and Bourret, B. (2000). Multicellular Natural Convection in a High Aspect Ratio Cavity: Experimental And Numerical Results, International Journal of Heat and Mass Transfer, 43(17): 3157-3170.
32.
Lbnl (2006). THERM 5.2/WINDOW 5.2 NFRC Simulation Manual, Lawrence Berkeley National Laboratory, CA.
33.
Lee, Y. and Korpela, S.A. (1983). Multicellular Natural Convection in a Vertical Slot, Journal of Fluid Mechanics, 126: 91-121.
34.
Noyé, P.A., Laustsen, J.B. and Svendsen, S. (2004). Calculating the Heat Transfer Coefficient of Frame Profiles with Internal Cavities, Nordic Journal of Building Physics (Acta physica aedificiorum), 3.
35.
Raithby, G.D., Hollands, K.G.T. and Unny, T.E. (1977). Analysis of Heat Transfer by Natural Convection Across Vertical Fluid Layers, Journal of Heat Transfer. Transactions of the ASME, 99(2): 287-293.
36.
Schrey, A.-C., Fraser, R.A. and de Abreu, P.F. (1998). Local Heat Transfer Coefficients for a Flushmounted Glazing Unit, ASHRAE Transactions, 104(1): 1207-1221.
37.
Shewen, E., Hollands, K.G.T. and Raithby, G.D. (1996). Heat Transfer by Natural Convection across a Vertical Air Cavity of Large Aspect Ratio, Journal of Heat Transfer. Transactions of the ASME, 118(4): 993-995.
38.
Standaert, P. (1984). Thermal Evaluation of Window Frames by the Finite Difference Method, In: Proceedings of Windows in Building Design and Maintenance, Swedish Council for Building Research , Stockholm.
39.
Svendsen, S., Duer, K. and Noyé, P. (2000). Calculating the Heat Transfer Coefficient of Frame Profiles in Aluminium, Report SR-0023 - Revision 1, Department of Buildings and Energy, Technical University of Denmark, Lyngby.
40.
Wright, J.L. and Sullivan, H.F. (1994). A two-Dimensional Numerical Model for Natural Convection In A Vertical, Rectangular Window Cavity, ASHRAE Transactions, 100(2): 1193-1206.
41.
Wright, J. (1996). A correlation to quantify convective heat transfer between vertical window glazings, ASHRAE Transactions, 102(1): 940-946.
42.
Yin, S.H., Wung, T.Y. and Chen, K. (1978). Natural Convection in an Air Layer Enclosed Within Rectangular Cavities, International Journal of Heat and Mass Transfer, 21(3): 307-315.
43.
Zhao, Y., Curcija, D. and Goss, W.P. (1997). Prediction of the Multicellular Flow Regime of Natural Convection in Fenestration Glazing Cavities, ASHRAE Transactions, 103(1): 1009-1020.
44.
Zhao, Y. (1998). Investigation of Heat Transfer Performance in Fenestration System Based on Finite Element Method, Ph.D. Dissertation, Department of Mechanical and Industrial Engineering, University of MassachusettsAmherst.
