Investigation of the structure and mechanical properties of castings of alloy AlSi7Mg,cast irons GG15 and GG25 and steel GX120Mn12,modified by nanosized powders
Restricted accessResearch articleFirst published online March, 2014
Investigation of the structure and mechanical properties of castings of alloy AlSi7Mg,cast irons GG15 and GG25 and steel GX120Mn12,modified by nanosized powders
The influence of nanopowders on the structure and mechanical properties was investigated in castings of aluminium alloy AlSi7Mg, grey cast irons GG15 and GG25 and steel GX120Mn12. Mixtures of SiC, TiCN and Y2O3 nanopowders were used. These mixtures or nanocompositions were coated with Cu, Cr, Ni and Fe metal protectors in order to improve wetting of the metal melt. Introducing small amounts of nanocompositions (less than 0.1 wt%) into the melt was found to refine the microstructure and improve the mechanical properties of the castings.
SaburovVPCherepanovANZhukovMF. Plasma chemical synthesis of ultrafine powders and their application for modification of metals and alloys. Novosibirsk: Nauka (Science), 1995, p.344.
2.
SaburovVPEreminENCherepanovAN. Modification of steels and alloys dispersed inoculator. Omsk: OmGTU, 2002, p.212.
RazaviMRahimipouraMRRajabi-ZamaniaAH.Effect of nanocrystalline TiC powder addition on the hardness and wear resistance of cast iron. Mat Sci Eng: A Struct2007; 454–455: 144–147.
6.
LazarovaRPetrovRHGaidarovaV. Influence of nano-modifiers on the microstructure and mechanical properties of P265GH cast steel. Mater Design2011; 32: 2734–2741.
