In this study, a sulfur-free softwood lignin (SFSL) was electrospun to form bead-free fibers. The fibers were evaluated as potential precursors for carbon fiber production. Higher heating rates of thermostabilization caused afused fiber morphology. The lignin purification process also affected the quality of the SFSL-based carbon fibers. Therefore, the yield, morphological characteristics, structural characteristics, electrical conductivity and mechanical properties of the carbon fibers were evaluated. At higher carbonization temperatures crystalline carbon fibers were formed. As a result, as the carbonization temperature increased, the conductivity of SFSL-based carbon fibers also increased.
LinL., LiY., and KoF.K., Fabrication and properties of lignin based carbon nanofiber. Journal of Fiber Bioengineering and Informatics, 2013. 6(4): p. 335–347.
4.
DallmeyerI., Preparation and Characterization of Interconnected, Kraft Lignin-Based Carbon Fibrous Materials by Electrospinning. Macromolecular Materials and Engineering, 2014. 299(5): p. 540–551.
5.
GoudarziA., LinL.-T., and KoF.K., X-Ray Diffraction Analysis of Kraft Lignins and Lignin-Derived Carbon Nanofibers. Journal of Nanotechnology in Engineering and Medicine, 2014. 5(2): p. 021006–021006.
6.
LallaveM., Filled and hollow carbon nanofibers by coaxial electrospinning of alcell lignin without binder polymers. ADVANCED MATERIALS-DEERFIELD BEACH THEN WEINHEIM-, 2007. 19(23): p. 4292.
7.
Ruiz-RosasR., The production of submicron diameter carbon fibers by the electrospinning of lignin. Carbon, 2010. 48(3): p. 696–705.
8.
WangS.-X., Lignin-derived fused electrospun carbon fibrous mats as high performance anode materials for lithium ion batteries. ACS applied materials & interfaces, 2013. 5(23): p. 12275–12282.
9.
HuS., and HsiehY.-L., Ultrafine microporous and mesoporous activated carbon fibers from alkali lignin. Journal of Materials Chemistry A, 2013. 1(37): p. 11279–11288.
10.
KadlaJ.F., Lignin-based carbon fibers for composite fiber applications. Carbon, 2002. 40(15): p. 2913–2920.
11.
KuboS., and KadlaJ., Lignin-based carbon fibers: Effect of synthetic polymer blending on fiber properties. Journal of Polymers and the Environment, 2005. 13(2): p. 97–105.
12.
BakerD.A., GallegoN.C., and BakerF.S., On organic-purified lignin toward the the characterization and spinning of an manufacture of low-cost carbon fiber. Journal of Applied Polymer Science, 2012. 124(1): p. 227–234.
13.
BakerD.A., and RialsT.G., Recent advances in low-cost carbon fiber manufacture from lignin. Journal of Applied Polymer Science, 2013. 130(2): p. 713–728.
14.
TenhaeffW.E., Highly Robust Lithium Abundant, Renewable, and Low-Cost Ion Battery Anodes from Lignin: An Material. Advanced Functional Materials, 2014. 24(1): p. 86–94.
15.
Suhas, CarrottP.J.M., and Ribeiro CarrottM.M.L., Lignin – from natural adsorbent to activated carbon: A review. Bioresource Technology, 2007. 98(12): p. 2301–2312.
16.
ChakarF.S., and RagauskasA.J., Review of current and future softwood kraft lignin process chemistry. Industrial Crops and Products, 2004. 20(2): p. 131–141.
17.
StewartD., Lignin as a base material for materials applications: Chemistry, application and economics. Industrial crops and products, 2008. 27(2): p. 202–207.
18.
RenekerD.H., and YarinA.L., Electrospinning jets and polymer nanofibers. Polymer, 2008. 49(10): p. 2387–2425.
19.
ThompsonC., Effects of parameters on nanofiber diameter determined from electrospinning model. Polymer, 2007. 48(23): p. 6913–6922.
20.
DallmeyerI., ChowdhuryS., and KadlaJ.F., Preparation and Characterization of Kraft Lignin-Based Moisture-Responsive Films with Reversible Shape-Change Capability. Biomacromolecules, 2013. 14(7): p. 2354–2363.
21.
DallmeyerI., KoF., and KadlaJ.F., Electrospinning of Technical Lignins for the Production of Fibrous Networks. Journal of Wood Chemistry and Technology, 2010. 30(4): p. 315–329.
22.
DallmeyerI., KoF., and KadlaJ.F., Correlation of Elongational Fluid Properties to Fiber Diameter in Electrospinning of Softwood Kraft Lignin Solutions. Industrial & Engineering Chemistry Research, 2014. 53(7): p. 2697–2705.
23.
PoursorkhabiV., MohantyA.K., and MisraM., Electrospinning of aqueous lignin/poly (ethylene oxide) complexes. Journal of Applied Polymer Science, 2015. 132(2).
24.
AslanzadehS., Electrospinning of N-Dimethylformamide Solutions. Colloidal Lignin in Poly (ethylene oxide) N, Macromolecular Materials and Engineering, 2016.
25.
AslanzadehS., Morphologies of Electrospun Fibers of Lignin in Poly(ethylene oxide) / N,N-DimethylformamideJournal of Applied Polymer Science, 2016.
26.
InagakiM., YangY., and KangF., Carbon nanofibers prepared via electrospinning. Advanced Materials, 2012. 24(19): p. 2547–2566.
27.
LoraJ.H., and GlasserW.G., Recent industrial applications of lignin: a sustainable alternative to nonrenewable materials. Journal of Polymers and the Environment, 2002. 10(1-2): p. 39–48.
28.
KosyakovD., Optimization of sample preparation conditions in the study of lignin by MALDI mass spectrometry. Journal of Analytical Chemistry, 2014. 69(14): p. 1344–1350.
29.
BraunJ., HoltmanK., and KadlaJ., Lignin-based carbon fibers: Oxidative thermostabilization of kraft lignin. Carbon, 2005. 43(2): p. 385–394.
30.
BakerD.A., and HosseinaeiO., High Glass Transition Lignins and Lignin Derivatives for the Manufacture of Carbon and Graphite Fibers. 2014, Google Patents.
31.
ZouL., An investigation of heterogeneity of the degree of graphitization in carbon–carbon composites. Materials Chemistry and Physics, 2003. 82(3): p. 654–662.
32.
YenB., An investigation of friction and wear mechanisms of carbon-carbon composites in nitrogen and air at elevated temperatures. Carbon, 1996. 34(4): p. 489–498.
33.
TuinstraF., and KoenigJ.L., Raman spectrum of graphite. The Journal of Chemical Physics, 1970. 53(3): p. 1126–1130.
34.
KimC., Fabrication of Electrospinning-Derived Carbon Nanofiber Webs for the Anode Material of Lithium-Ion Secondary Batteries. Advanced Functional Materials, 2006. 16(18): p. 2393–2397. Nakamizo, M., R. Kammereck, and P.L. Walker, Laser Raman studies on carbons. Carbon, 1974. 12(3): p. 259–267.
35.
KimC., Raman spectroscopic evaluation of polyacrylonitrile-based carbon nanofibers prepared by electrospinning. Journal of Raman Spectroscopy, 2004. 35(11): p. 928–933.
36.
ParkS.H., KimC., and YangK.S., Preparation of carbonized fiber web from electrospinning of isotropic pitch. Synthetic metals, 2004. 143(2): p. 175–179.
37.
DavéV., Molecular organization of lignin during carbonization. Polymer, 1993. 34(15): p. 3144–3154.
38.
BabuV.S., and SeehraM.S., Modeling of disorder and X-ray diffraction in coal-based graphitic carbons. Carbon, 1996. 34(10): p. 1259–1265.
