PET (polyethylene terephthalate) is mostly used in textile and packaging industries. PET Bottle wastes are separated from other wastes and after that some processes are applied to obtain PET flakes, such as breaking, washing, drying and etc. r-PET fibers are produced by melt spinning method from these recycled PET flakes. r-PET fibers have already been used for secondary textile products like as carpet bottoms, sleeping bags and insulation materials. In this study usability of recycled PET fibers in apparel industry were researched. Comparative investigations of bursting strength, abrasion resistance, air permeability, surface friction, circular bending rigidity and dimensional stability properties were done to knitted fabrics produced from r-PET and blends with PET and cotton fibers. It was found that, instead of PET, r-PET fibers can be blended in certain amounts without compromising fabrics performance.
TelliA, and OzdilN, “Lint Generation of the Yarns Produced PET Fibers”, International Congress of Innovative Textiles, Corlu, Turkey, 20–22 October 2011, pp. 32–35.
8.
OktemT, “Polyester Atiklarin Degerlendirilmesi”, Tekstil ve Konfeksiyon, 6: 396–400, 1998.
9.
AguadoJ, and SerranoD, “Feedstock Recycling of Plastic Wastes, RSC Clean Technology Monographs, 1999, p. 192.
10.
AwajaF, and PavelD, “Recycling of Pet”, European Polimer Journal, 41: 1453–1477, 2005.
11.
ManciniSD., SchwartzmanJ.A.S., NogueiraA.R., KagoharaD.A., and ZaninM, “Additional Steps in Mechanical Recycling of Pet”, Journal of Cleaner Production, 18: 92–100, 2009.
12.
ShenL, WorrellE, and PatelM, “Open-Loop Recycling: A LCA Case Study of Pet Bottle to-Fibre Recycling”, Resources Concervation and Recycling Journal, 55: 34–52, 2010
13.
Napcor: National Association for Pet Container Resources, “Comprehensive Information about the PET package”, http://www.napcor.com/pdf/v4-11 NAPCOR PET Interactive.pdf (2009, accessed 01 May 2013)
Al-SalemSM, LettieriP, and BaeyensJ, “Recycling of Recovery Routes of Plastic Solid Waste”, Waste Management, 29: 2625–2643, 2009.
16.
GoodshipV, “Introduction to Plastic Recycling”, Smithers Rapra Technology Limited, 2007, p. 174.
17.
MannhartM, “Pet Siselerden Filament Iplik”, Melliand Türkiye Sayisi, 3:166–169, 1998.
18.
AbbasiM, MojtahediM.R.M., and KhosroshahiA, “Effect of Spinning Speed on the Structure and Physical Properties of Filament Yarns Produced from Used Pet Bottles, Journal of Applied Polymer Science, 103: 3972–3975, 2007.
19.
TelliA, and OzdilN, “Properties of the yarns produced from r-PET fibers and their blends”, Tekstil ve Konfeksiyon, 23(1): 3–10, 2013.
20.
TelliA, “A Study on comparison of yarn and fabric properties which are produce from conventional PES and recycled PET bottle fibers”, MSc Thesis, Ege University, Turkey, 2011.
21.
OzdilN, “Kumaslarda Fiziksel Kalite Kontrol YÖntemleri”, E.U. TEKAUM Yayini, 2003, p. 136. ISBN No: 975-483-579-9
22.
TS EN ISO 139. Textiles- Standard atmospheres for conditioning and testing.
23.
TS 7128 EN ISO 5084. Textiles-Determination of thickness of textiles and textile products.
24.
TS 393 EN ISO 13938–1. Textiles- Bursting properties of fabrics- Part 1: Hydraulic method for determination of bursting strength and bursting distension.
25.
ISO 12947–3. Textiles- Determination of the abrasion resistance of fabrics by the Martindale method- Part 3: Determination of mass loss.
26.
TS EN ISO 12945–2. Textiles- Determination of fabric propensity to surface fuzzing and to pilling- Part 2: Modified Martindale method.
TS 391 EN ISO 9237. Textiles-Determination of permeability of fabrics to air.
29.
LimaM, HesL, VasconcelosR, and MartinsJ, “Frictorq-Accessing Fabric Friction with a Novel Fabric Surface Tester”, Autex Research Journal, 5: 194–201, 2005.
30.
ASTM D 4032. Standard test method for stiffness of fabric by the circular bend procedure.
31.
TS EN ISO 6330:2012. Textiles - Domestic washing and drying procedures for textile testing.
32.
UkponmwanJO, MukhopadhyayA, and ChatterjeeKN, “Pilling”, The Textile Institute: Textile Progress, 1998, p. 60. as cited in CD Gintis and E J Mead. The Mechanism of Pilling, Textile Research Journal, 29: 578–585, 1959.
33.
UkponmwanJO, MukhopadhyayA, and ChatterjeeKN, “Pilling”, The Textile Institute: Textile Progress, 1998
34.
MortonWE, and HearleJWS, “Physical Properties of Textile Fibers”, The Textile Institute and Woodhead Publishing, 2008, p: 421.
