We are continuing an effort to quantitatively measure the influence of processing variables on the detailed structure of commercial polypropylene melt blown (MB) webs. In this paper, we report the influence of primary airflow rate on fiber entanglement, global fiber orientation and pore structure in webs. This enabled us to quantify the influence of primary airflow on web structural features as well as achieve greater understanding of the commercial MB process.
YinH., YanZ., KoW.C. and BreseeR.R. “Fundamental Description of the Melt Blowing Process,” International Nonwovens Journal, 9(4) (2000) 25–28
2.
BreseeR.R. and QureshiU.A., “Influence of Processing Conditions on Melt Blown Web Structure: Part 1 - DCD,” International Nonwovens Journal, 13(1) (2004) 49–55
3.
HuangX.C. and BreseeR.R. “Characterizing Nonwoven Web Structure Using Image Analysis Techniques. Part II: Fiber Orientation Analysis in Thin Webs,” Journal of Nonwovens Research, 5(2), 14–21 (1993)
4.
HuangX.C. and BreseeR.R. “Characterizing Nonwoven Web Structure Using Image Analysis Techniques. Part I: Pore Analysis in Thin Webs,” Journal of Nonwovens Research, 5(1), 13–21 (1993)
5.
YanZ. and BreseeR.R. “Flexible Multifunction Instrument for Automated Nonwoven Web Structure Analysis,” Textile Research Journal, 69, 795–804 (1999)
6.
BreseeR.R. and QureshiU.A. “Fiber Motion Near the Collector During Melt Blowing. Part I: General Considerations,” International Nonwovens Journal, 11(2), 27–34 (2002)
7.
YinH., YanZ. and BreseeR.R. “Experimental Study of the Melt Blowing Process,” International Nonwovens Journal, 8(1), 60–65 (1999)
8.
BreseeR.R. and KoW.C. “Fiber Formation During Melt Blowing,” International Nonwovens Journal, 12(2) (2003) 21–28
