In this work, the localised corrosion behaviour of friction stir welded (FSW) AA7050-T76511 alloy was studied using micro-electrochemical scanning methods combined with surface characterisation. The study focused on macro galvanic interactions between the stir zone (SZ) and thermo-mechanically/heat-affected zones (TMAZ/HAZ), considering distinct initial micro-structures created by an L-bent pre-welding configuration at advancing and retreating sides. Agar-visualisation, local electrochemical impedance spectroscopy and scanning vibrating electrode technique revealed significant galvanic coupling. The TMAZ/HAZ regions behaved anodically relative to the SZ, with notably higher electrochemical activity observed at the AS. These findings demonstrate the critical influence of initial microstructural differences on corrosion susceptibility in FSW AA7050 alloys.
BugarinAFSDe AbreuCPTeradaM, et al.Effect of friction stir welding (FSW) on the electrochemical behavior and galvanic coupling of AA2024-T3 and AA7475-T651. Mater Today Commun [Internet]2020; 25: 101591.
2.
ABAL. Associação Brasileira do Alumínio [Internet]. 2019 [cited 2021 Mar 9]. Available from: http://abal.org.br.
3.
de AlmeidaTFRamirezOMPLanzuttiA, et al.Addition of molybdate ions to the anodizing bath to improve the corrosion resistance of clad 2024-T3 alloy anodized in tartaric-sulfuric acid. Surf Coat Technol [Internet]2024; 482: 130682.
4.
Prada RamirezOMAlmeidaTdMarinJH, et al.Effect of hydrolysis time on the corrosion resistance of sol-gel coated AA2024-T3 anodized in TSA. Surf Coat Technol [Internet]2024; 482: 130683.
5.
BirbilisNBuchheitRG. Electrochemical characteristics of intermetallic phases in aluminum alloys an experimental survey and discussion. J Electrochem Soc [Internet]2005; 152: B140–B151.
6.
PatelVLiWWangG, et al.Friction stir welding of dissimilar aluminum alloy combinations: state-of-the-art. Metals (Basel)2019; 9: 270.
7.
WangGZhaoYHaoY. Friction stir welding of high-strength aerospace aluminum alloy and application in rocket tank manufacturing. J Mater Sci Technol2018; 34: 73–91.
8.
JariyaboonMDavenportAJAmbatR, et al.Corrosion of a dissimilar friction stir weld joining aluminium alloys AA2024 and AA7010. Corrosion Eng Sci Technol2006; 41: 135–142.
9.
de AbreuCPCostaIde MeloHG, et al.Multiscale electrochemical study of welded al alloys joined by friction stir welding. J Electrochem Soc2017; 164: C735–C746.
10.
ZhangCHuangGCaoY, et al.Investigation on microstructure and localized corrosion behavior in the stir zone of dissimilar friction-stir-welded AA2024/7075 joint. J Mater Sci [Internet]2020; 55: 15005–15032.
11.
KhanNZSiddiqueeANKhanZA, et al.Mechanical and microstructural behavior of friction stir welded similar and dissimilar sheets of AA2219 and AA7475 aluminium alloys. J Alloys Compd [Internet]2017; 695: 2902–2908.
DhondtMAubertISaintierN, et al.Effects of microstructure and local mechanical fields on intergranular stress corrosion cracking of a friction stir welded aluminum-copper-lithium 2050 nugget. Corros Sci [Internet]2014; 86: 123–130.
15.
FersiniDPirondiA. Fatigue behaviour of Al2024-T3 friction stir welded lap joints. Eng Fract Mech2007; 74: 468–480.
16.
QueirozFMDonatusUPrada RamirezOM, et al.Effect of unequal levels of deformation and fragmentation on the electrochemical response of friction stir welded AA2024-T3 alloy. Electrochim Acta [Internet]2019; 313: 271–281.
17.
HeXGuFBallA. A review of numerical analysis of friction stir welding. Prog Mater Sci [Internet]2014; 65: 1–66.
18.
PrabhurajPRajakumarS. Experimental investigation on corrosion behavior of friction stir welded AA7075-T651 aluminium alloy under 3.5% wt NaCl environment. Mater Today Proc [Internet]2020; 45: 3–10.
19.
LumsdenJBMahoneyMWRhodesCG, et al.Corrosion behavior of friction-stir-welded AA7050-T7651. Corrosion2003; 59: 212–219.
20.
PagliaCSCarrollMCPittsBC, et al.Strength, corrosion, and environmentally assisted cracking of a 7075-T6 friction stir weld. Mater Sci Forum2002; 396–402: 1677–1684.
21.
MishraRSMaZY. Friction stir welding and processing. Mater Sci Eng R: Reports2005; 50: 1–78.
22.
WadesonDAZhouXThompsonGE, et al.Corrosion behaviour of friction stir welded AA7108 T79 aluminium alloy. Corros Sci2006; 48: 887–897.
23.
PadovaniCDavenportAJConnollyBJ, et al.Corrosion protection of AA7449-T7951 friction stir welds by laser surface melting with an excimer laser. Corros Sci [Internet]2011; 53: 3956–3969.
24.
UematsuYTokajiKTozakiY, et al.Fatigue behaviour of friction stir welded A7075-T6 aluminium alloy in air and 3% NaCl solution. Weld Int2013; 27: 441–449.
25.
PagliaCSUngaroLMPittsBC, et al. The corrosion and environmentally assisted cracking behavior of high strength aluminum alloys friction stir welds: 7075-T651 vs65–75.
26.
de Souza Carvalho MachadoCDonatusUMilagreMX, et al.How microstructure affects localized corrosion resistance of stir zone of the AA2198-T8 alloy after friction stir welding. Mater Charact2021; 174: 111025.
27.
MoretoJAdos SantosMSFerreiraMOA, et al.Corrosion and corrosion-fatigue synergism on the base metal and nugget zone of the 2524-T3 Al alloy joined by FSW process. Corros Sci [Internet]2021; 182: 109253.
28.
DonatusUViveirosBdAlencarMd, et al.Correlation between corrosion resistance, anodic hydrogen evolution and microhardness in friction stir weldment of AA2198 alloy. Mater Charact [Internet]2018; 144: 99–112.
29.
MilagreMXDonatusUMariaR, et al.Galvanic coupling effects on the corrosion behavior of the 6061 aluminum alloy used in research nuclear reactors. J Nucl Mater [Internet]2020; 541: 152440.
30.
da SilvaRMPIzquierdoJMilagreMX, et al.On the local corrosion behavior of coupled welded zones of the 2098-T351 al-cu-li alloy produced by friction stir welding (FSW): an amperometric and potentiometric microelectrochemical investigation. Electrochim Acta [Internet]2021; 373: 137910.
31.
SidaneDBousquetEDevosO, et al.Local electrochemical study of friction stir welded aluminum alloy assembly. J Electroanalytical Chem [Internet]2015; 737: 206–211.
32.
The Aluminium Association. International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys with support for on-line access from: aluminum extruders council use of the information. Aluminum Assoc Arlington Virg2015; 31.
33.
LiuZWangJQinZ, et al.A mechanistic study on stress corrosion cracking of sensitized AA5083 in a simulated water level fluctuation zone: combined impedance analysis and tensile tests. Corros Sci2025; 245: 112701.
34.
PanCCXiaDHHouMY, et al.Cavitation erosion of the AA7050 aluminum alloy in 3.5 wt% NaCl solution—part 1: mitigating effect by corrosion. Corros Sci2024; 232: 112012.
35.
JiYWangMQinW, et al.Near-atomic-scale study of the oxide films on the grain boundaries of al-mg alloys at the initial stage of corrosion: experimental investigations and DFT calculations. Corros Sci2025; 244: 112640.
36.
BertoncelloJCBManhaboscoSMDickLFP. Corrosion study of the friction stir lap joint of AA7050-T76511 on AA2024-T3 using the scanning vibrating electrode technique. Corros Sci2015; 94: 359–367.
37.
WarmuzekM. Metallographic techniques for aluminum and its alloys. Metallograph Microstruct2018; 9: 711–751.
de Sousa AraujoJVDonatusUQueirozFM, et al.On the severe localized corrosion susceptibility of the AA2198-T851 alloy. Corros Sci [Internet]2018; 133: 132–140.
41.
DickAPKnörnschildGHDickLFP. Anodising and corrosion resistance of AA 7050 friction stir welds. Corros Sci [Internet]2017; 114: 28–36.
42.
MondalCMukhopadhyayAK. On the nature of T(Al2Mg3Zn3) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy. Mater Sci Eng A [Internet]2005; 391: 367–376.
43.
VanderVG. Color metallography. Microsc Microanal2004; 10: 70–71.
44.
QueirozFMDonatusUPradaRO, et al.Effect of unequal levels of deformation and fragmentation on the electrochemical response of friction stir welded AA2024-T3 alloy. Electrochim Acta2019; 313: 271–281.
de Sousa AraujoJVDonatusUQueirozFM, et al.On the severe localized corrosion susceptibility of the AA2198-T851 alloy. Corros Sci2018; 133: 132–140.
47.
DickAPKnörnschildGHDickLFP. Anodising and corrosion resistance of AA 7050 friction stir welds. Corros Sci2017; 114: 28–36.
48.
MondalCMukhopadhyayAK. On the nature of T(Al2Mg3Zn3) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy. Mater Sci Eng A2005; 391: 367–376.
49.
ShenKChenJlYinZm. TEM Study on microstructures and properties of 7050 aluminum alloy during thermal exposure. Transact Nonferrous Metals Soc China2009; 19: 1405–1409.
50.
JataKVSankaranKKRuschauJJ. Friction-stir welding effects on microstructure and fatigue of aluminum alloy 7050-T7451. Metall Mater Trans A Phys Metall Mater Sci2000; 31: 2181–2192.
51.
SuJQNelsonTWMishraR, et al.Microstructural investigation of friction stir welded 7050-T651 aluminium. Acta Mater2003; 51: 713–729.
52.
ThreadgillPLLeonardAJShercliffHR, et al.Friction stir welding of aluminium alloys. Int Mater Rev2009; 54: 49–93.
53.
SharmaCUpadhyayV. Microstructure and mechanical behavior of similar and dissimilar aa2024 and AA7039 friction stir welds. Engineering Review2020; 41: 21–33.
54.
WangWYuanSQiaoK, et al.Microstructure and nanomechanical behavior of friction stir welded joint of 7055 aluminum alloy. J Manuf Process2021; 61: 311–321.
55.
HansenN. Hall-petch relation and boundary strengthening. Scr Mater2004; 51: 801–806.
56.
BartgesCW. Evidence of η″ or ordered zone formation in aluminum alloy 7075 from differential scanning calorimetry. Scripta Metallurgica et Materiala1993; 28: 1039–1042.
57.
FullerCBMahoneyMWCalabreseM, et al.Evolution of microstructure and mechanical properties in naturally aged 7050 and 7075 Al friction stir welds. Mater Sci Eng A2010; 527: 2233–2240.
58.
FengAHChenDLMaZY. Microstructure and cyclic deformation behavior of a friction-stir-welded 7075 al alloy. Metall Mater Trans A Phys Metall Mater Sci2010; 41: 957–971.
59.
DumontMSteuwerADeschampsA, et al.Microstructure mapping in friction stir welds of 7449 aluminium alloy using SAXS. Acta Mater2006; 54: 4793–4801.
60.
AhmedMMZWynneBPRainforthWM, et al.Microstructure, crystallographic texture and mechanical properties of friction stir welded AA2017A. Mater Charact2012; 64: 107–117.
61.
ShigematsuIKwonYJSuzukiK, et al.Joining of 5083 and 6061 aluminum alloys by friction stir welding. J Mater Sci Lett2003; 22: 353–356.
62.
MaLNiuSJiS, et al.Comparative study of 2060-T8 Al-Li alloy friction stir welded joints between natural cooling and water cooling. Arch Metall Mater2020; 65: 305–312.
63.
LiuHHuYDouC, et al.An effect of the rotation speed on microstructure and mechanical properties of the friction stir welded 2060-T8 Al-Li alloy. Mater Charact2017; 123: 9–19.
64.
DonatusUFerreiraROMogiliNVV, et al.Corrosion and anodizing behaviour of friction stir weldment of AA2198-T851 Al-Cu-Li alloy. Mater Chem Phys2018; 219: 493–511.
65.
PérezHTufaroLBerardoL, et al.Corrosion behavior of friction stir welds on aa7075-T651:Galvanic evaluation. Revista Materia2018; 23.
66.
de AraujoJVSda SilvaRMPDonatusU, et al.Microstructural, electrochemical and localized corrosion characterization of the AA2198-T851 alloy. Mater Res2020; 23. DOI: https://doi.org/10.1590/1980-5373-mr-2020-0161.
67.
IsaacsHS. 2000W.R. Whitney award lecture: visualizing corrosion. Corrosion2000; 56: 971–978.
68.
BoagAHughesAGlennA. Corrosion of AA2024-T3 part I: localised corrosion of isolated IM particles. Corros Sci2011; 53: 17–26.
69.
HughesABoagAGlennA. Corrosion of AA2024-T3 part II: co-operative corrosion. Corros Sci2011; 53: 27–39.
70.
GlennAMusterTLuoC, et al.Corrosion of AA2024-T3 part III: propagation. Corros Sci2011; 53: 40–50.
71.
BugarinAFSDe AbreuCPTeradaM, et al.Effect of friction stir welding (FSW) on the electrochemical behavior and galvanic coupling of AA2024-T3 and AA7475-T651. Mater Today Commun2020; 25: 101591.
72.
RaoTSReddyGMRaoSRK. Microstructure and mechanical properties of friction stir welded AA7075-T651 aluminum alloy thick plates. Transact Nonferrous Metals Soc China (English Edition) [Internet]2015; 25: 1770–1778.
73.
LumsdenJBMahoneyMWPollockG, et al.Intergranular corrosion following friction stir welding of aluminum alloy 7075-T651. Corrosion1999; 55: 1127–1135.
74.
WangY-FLuHWangH, et al.Insight into the tribocorrosion of AA7050 friction stir welding joint. Corros Sci [Internet]2024; 238: 112345.
75.
PagliaCSJataKVBuchheitRG. The influence of artificial aging on the microstructure, mechanical properties, corrosion, and environmental cracking susceptibility of a 7075 friction-stir-weld. Mater Corros2007; 58: 737–750.
76.
WangYChenYZhouL, et al.Improving the corrosion resistance of friction stir welding joint of 7050 al alloy via optimizing the process route. J Materials Res Technol [Internet]2023; 24: 8098–8108.
77.
AdlerPNDeIasiR. Calorimetric studies of 7000 series aluminum alloys: II. Comparison of 7075, 7050 and RX720 alloys. Metall Trans A1977; 8: 1185–1190.
78.
RichardDIAdlerPN. Calorimetric studies of 7000 series aluminum alloys: I. Matrix precipitate characterization of 7075. Metall Trans A1977; 8: 1177–1183.
79.
LiuHHuYDouC, et al.An effect of the rotation speed on microstructure and mechanical properties of the friction stir welded 2060-T8 Al-Li alloy. Mater Charact [Internet]2017; 123: 9–19.
80.
ThreadgillPLLeonardAJShercliffHR and PJ, et al.Friction stir welding of aluminium alloys. Int Mater Rev2009; 54: 49–93.
81.
MilagreMXDonatusUMogiliNV, et al.Galvanic and asymmetry effects on the local electrochemical behavior of the 2098-T351 alloy welded by friction stir welding. J Mater Sci Technol2020; 45: 162–175.
82.
da SilvaRMilagreMAraujoJV, et al.Investigação da atividade eletroquímica de liga Al-Cu-Li após processo de soldagem por fricção e mistura. Quim Nova [Internet]2023; X: 1–12.
83.
Araujo JV deSMilagreMXCalderón-HernándezJW, et al.Friction Stir welding effects on the corrosion resistance of the 2098-T351 alloy. Materialia (Oxf)2025; 39: 102363.
