Abstract
The effect of hydrogen sulphide concentration on the corrosion behaviour of 07Cr16Ni6 austenitic-martensitic stainless steel in a 5% NaCl + 0.5% CH3COOH solution was studied to determine the role of H2S in the corrosion product formation and corrosion mechanism. Unstable passivation of steel is detected in a solution containing <100 mg/dm3 H2S. Steel corrodes in an electrochemically active state at >100 mg/dm3 H2S. When the pitting potential is reached, pitting damage occurs at the grain boundaries. The corrosion rate decreases by ∼five times after exposition for 720 h due to the formation of nickel and iron sulphides on the surface. Corrosion is accompanied by the absorption of 4.2–17.5 ppm hydrogen, 62…70% of which is diffusible and can cause hydrogen embrittlement. The scheme of steel corrosion under the influence of different concentrations of hydrogen sulphide is proposed.
Keywords
Get full access to this article
View all access options for this article.
