The demand for gloves (e.g., disposable gloves, medical gloves) is increasing due to the Coronavirus disease 2019 (COVID-19) pandemic. Stability in the supply chain in the glove industry is important, and thus strategies are used to solve the problem of the shortage of nitrile gloves. The blending of nitrile butadiene rubber (NBR) with polyurethane (PU) and the use of the nanocomposite concept is among the feasible approaches. The present study aims to investigate the effects of nanokaolin (NK) on the tensile and chemical properties of carboxylated nitrile butadiene rubber (NBR)/polyurethane (PU) latex blends. Three different loadings of NK (10, 20, and 30 parts per hundred rubber) were added to the NBR/PU (at a blending ratio of 85/15). The zeta potential showed that all the NBR compounds exhibit good colloidal stability. The incorporation of NK increased the crosslink density and tensile strength of the NBR/PU latex blends. The highest tensile strength was achieved when the NK loading was 20 phr. All the NBR blends and nanocomposites (NBR/PU-based) possess tensile properties that fulfill the requirements for glove application. The chemical resistance of NBR compounds was increased by the incorporation of NK due to the higher crosslink density and barrier properties contributed by the NK.
JafarzadehSAliasAKAriffinF, et al.Preparation and characterization of bionanocomposite films reinforced with nano kaolin. J Food Sci Technol2016; 53(2): 1111–1119.
6.
OmarMFMohamadNAliFB. Preparation and characterizations of latex/filler nanocomposites. IIUM Engg J2020; 21(2): 230–238.
7.
TanJWangXLuoY, et al.Rubber/clay nanocomposites by combined latex compounding and melt mixing: A masterbatch process. Mater Des2012; 34: 825–831.
8.
CostaFRPradhanSWagenknechtU, et al.XNBR/LDH nanocomposites: Effect of vulcanization and organic modifier on nanofiller dispersion and strain-induced crystallization. J Polym Sci B Polym Phys2010; 48(22): 2302–2311.
De SousaFDBMantovaniGLScuracchioCH. Mechanical properties and morphology of NBR with different clays. Polym Test2011; 30(8): 819–825.
11.
AinZNAzuraAR. Effect of different types of filler and filler loadings on the properties of carboxylated acrylonitrile–butadiene rubber latex films. J Appl Polym Sci2010; 119(5): 2815–2823.
12.
EyssaHMAbulyaziedDEAbdulrahmanM, et al.Mechanical and physical properties of nanosilica/nitrile butadiene rubber composites cured by gamma irradiation. Egyptian J Petrol2018; 27(3): 383–392.
13.
KapgateBPDasC. Filler–filler and rubber–filler interactions in nitrile rubber/silica composites. Emerg Mater Res2014; 3(1): 46–51.
14.
KrzeminskaSMSmejda-KrzewickaAALeniartA, et al.Effects of curing agents and modified graphene oxide on the properties of XNBR composites. Polym Test2020; 83: 106368–106371. DOI: 10.1016/j.polymertesting.2020.106368
15.
Preetha NairKThomasPJosephR. Latex stage blending of multiwalled carbon nanotube in carboxylated acrylonitrile butadiene rubber: Mechanical and electrical properties. Mater Des2012; 41: 23–30.
16.
La MantiaFPMorrealeMBottaL, et al.Degradation of polymer blends: A brief review. Polym Degrad Stab2017; 145: 79–92.
17.
BiswasTDasADebnathSC, et al.SBR–XNBR blends: a novel approach towards compatibilization. Eur Polym J2004; 40: 847–854.
18.
AbidinZZMamauodSNLKhooiD, et al.Studies of carboxylated nitrile butadiene rubber/butyl reclaimed rubber (XNBR/BRR) blends for shoe soles application. J Mech Behav Mater2021; 30: 179–187.
ZhangYLiuQXiangJ, et al.Thermal stability and decomposition kinetics of styrene-butadiene rubber nanocomposites filled with different particle sized kaolinites. Applied Clay Science2014; 95: 159–166.
21.
HackleyV. Measuring the size of nanoparticles in aqueous media using batch-mode dynamic light scattering, Natl Inst Stand Technol Spec Publ2021; 1200-6: 1–14.
22.
CovaMFernándezMFernándezA, et al.Acrylonitrile butadiene nanocomposites containing different clays by latex compounding method. Polym Eng Sci2019; 59(4): 736–744.
23.
OliveiraLVSUekiMMBarretoLS. Characterization and stabilization of nano-metakaolin colloidal suspensions. Powder Technol2021; 383: 43–55.
24.
MariaHLyczkoNNzihouA, et al.Transport of organic solvents through natural rubber/nitrile rubber/organically modified montmorillonite nanocomposites. J Mater Sci2013; 48(15): 5373–5386.
25.
KimDYParkJWLeeDY. Correlation between the crosslink characteristics and mechanical properties of natural rubber compound via accelerators and reinforcement. Polymers2020; 12: 2020–2114.
26.
DaudSOo YewHLAzuraAR. The effects of nano-cellulose filler on tensile and thermal properties of natural rubber latex films. AIP Conference Proceedings2020; 2267(1): 020079. DOI: 10.1063/5.0016167
27.
LiuQZhangYXuH. Properties of vulcanized rubber nanocomposites filled with nanokaolin and precipitated silica. Applied Clay Science2008; 42(1–2): 232–237.
HeSJWangYQWuYP, et al.Preparation, structure, performance, industrialisation and application of advanced rubber/clay nanocomposites based on latex compounding method. Plast Rubber Compos2010; 39(1): 33–42.
30.
HeSJHeTFWangJQ, et al.A novel method to prepare acrylonitrile-butadiene rubber/clay nanocomposites by compounding with clay gel. Compos Part B: Engg2019; 167: 356–361.
31.
ThomasBMariaHJGeorgeG, et al.A novel green approach for the preparation of high performance nitrile butadiene rubber-pristine graphene nanocomposites. Compos Part B: Engg2019; 175: 107174. DOI: 10.1016/j.compositesb.2019.107174
