Process optimization and removal of phenol formaldehyde resin coating using mechanical erosion process

Abstract

Consumption of coated abrasive discs in various automobile and pipe fitting application is increasing, due to its good surface finish. Coated abrasive disc consists of single layer of abrasive grain bonded to a fibre backing. The major portion of the disc is comprised of fibre backing. But the sustainability of the fibre backing is low and is dumped as waste after usage. The present work deals with the removal of resin coating and recovery of fibre backing from the spent coated abrasive discs using physical separation process such as sand blasting technique. Initially, the recovery experiment was carried out based on L16 orthogonal array. The factors and levels chosen for the experiments were erodent pressure (0.2, 0.4, 0.6 and 0.8 MPa), erodent size (36, 60, 80 and 120 grit), disc orientation (30, 45, 60 and 75°) and number of times flexing (5, 10, 15 and 20). The experimental result shows that erodent size and erodent pressure have a major impact on recovery of the fibre backing. The surface structure of the recovered backing was analysed using scanning electron microscopy and optical microscopy. The recovered backing was very much useful for the coated abrasive industry as the flexible backing and support material for abrasive grain coating.