Natural fiber-reinforced composites gained considerable interest in the scientific community due to their eco-friendly nature, cost-effective, and excellent mechanical properties. Here, we reported a chemical modification of kenaf fiber using propionic anhydride to enhance the compatibility with the epoxy matrix. The incorporation of the modified woven and nonwoven kenaf fibers into the epoxy matrix resulted in the improvement of the thermal and mechanical properties of the composite. The thermal stability of the epoxy composites was enhanced from 403°C to 677°C by incorporating modified woven kenaf fibers into the epoxy matrix. The modified and unmodified woven kenaf fiber-reinforced epoxy composites had a tensile strength of 64.11 and 58.82 MPa, respectively. The modified woven composites had highest flexural strength, which was 89.4 MPa, whereas, for unmodified composites, it was 86.8 MPa. The modified woven fiber-reinforced epoxy composites showed the highest value of flexural modulus, which was 6.0 GPa compared to unmodified woven composites (5.51 GPa). The impact strength of the epoxy composites was enhanced to 9.43 kJ m−2 by the incarnation of modified woven kenaf fibers into epoxy matrix. This study will be an effective platform to design the chemical modification strategy on natural fibers for enhancing the compatibility toward the hydrophobic polymer matrices.
SukiFMIsmailHHamidZA. Preparation and properties of polyvinyl alcohol/banana frond flour biodegradable film. Prog Rubber Plast Re2014; 30: 103–114.
2.
IsmailHIshakSHamidZAA. Comparison effect of mica and talc as filler in EPDM composites on curing, tensile and thermal properties. Prog Rubber Plast Re2013; 29: 109–122.
GacevaBGAvellaMMalinconicoM, et al.Natural fiber eco-composites. Polym Composite2007; 28: 98–107.
5.
GraupnerNHerrmannASMüssigJ. Natural and man-made cellulose fibre-reinforced poly(lactic acid) (PLA) composites: an overview about mechanical characteristics and application areas. Compos A Appl S2009; 40: 810–821.
6.
XueYDuYElderS, et al.Temperature and loading rate effects on tensile properties of kenaf bast fiber bundles and composites. Compos B Eng2009; 40: 189–196.
7.
AhmadSJamalY. Machining of polymer composites. New York: Springer, 2009.
8.
KarnaniRKrishnanMNarayanR. Biofiber-reinforced polypropylene composites. Polym Eng Sci1997; 37: 476–483.
9.
AbilashNSivapragashM. Environmental benefits of eco-friendly natural fiber reinforced polymeric composite materials. Int J Appl Innov Eng Manage2013; 2(1): 53–59.
10.
Van De WeyenbergIIvensJDe CosterA, et al.Influence of processing and chemical treatment of flax fibres on their composites. Compos Sci Technol2003; 63: 1241–1246.
11.
Herrera-FrancoPJValadez-GonzálezA. A study of the mechanical properties of short natural-fiber reinforced composites. Compos B2005; 36: 597–608.
12.
AjiISapuanSZainudinE, et al.Kenaf fibres as reinforcement for polymeric composites: a review. Int J Mech Mater Eng2009; 4: 239–248.
13.
Utsel and Simon. Surface modification of cellulose-based materials for tailoring of interfacial interactions, Stockholm: KTH Royal Institute of Technology, 2012.
14.
BelgacemMNGandiniA. The surface modification of cellulose fibres for use as reinforcing elements in composite materials. Compos Interface2005; 12: 41–75.
15.
AlvarezVAVazquezA. Influence of fiber chemical modification procedure on the mechanical properties and water absorption of MaterBi-Y/sisal fiber composites. Compos A Appl S2006; 37: 1672–1680.
16.
Abdul KhalilHIssamAAhmad ShakriM, et al.Conventional agro-composites from chemically modified fibres. Ind Crop Prod2007; 26: 315–323.
17.
RayDSarkarB. Characterization of alkali-treated jute fibers for physical and mechanical properties. J Appl Polym Sci2001; 80: 1013–1020.
18.
AhmedKSVijayaranganS. Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites. J Mater Process Tech2008; 207: 330–335.
19.
JawaidMKhalilHA. Effect of layering pattern on the dynamic mechanical properties and thermal degradation of oil palm-jute fibers reinforced epoxy hybrid composite. Bioresources2011; 6: 2309–2322.
20.
JosephSSreekalaMOommenZ, et al.A comparison of the mechanical properties of phenol formaldehyde composites reinforced with banana fibres and glass fibres. Compos Sci Technol2002; 62: 1857–1868.
21.
IdiculaMMalhotraSKJosephK, et al.Effect of layering pattern on dynamic mechanical properties of randomly oriented short banana/sisal hybrid fiber–reinforced polyester composites. J Appl Polym Sci2005; 97: 2168–2174.
22.
JannahMMariattiMBakarAA, et al.Effect of chemical surface modifications on the properties of woven banana-reinforced unsaturated polyester composites. J Reinf Plast Comp2009; 28: 1519–1532.
23.
ThiruchitrambalamMAlavudeenAAthijayamaniA, et al.Improving mechanical properties of banana/kenaf polyester hybrid composites using sodium laulryl sulfate treatment. Mater Phys Mech2009; 8: 165–173.
24.
RamaswamyGNSellersTTaoW, et al.Kenaf nonwovens as substrates for laminations. Ind Crop Prod2003; 17: 1–8.
25.
AzizSHAnsellMP. The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: part 1 – polyester resin matrix. Compos Sci Technol2004; 64: 1219–1230.
26.
ShibataSCaoYFukumotoI. Lightweight laminate composites made from kenaf and polypropylene fibres. Polym Test2006; 25: 142–148.
27.
LaiWMariattiMJaniSM. The properties of woven kenaf and betel palm (areca catechu) reinforced unsaturated polyester composites. Polym-Plast Technol2008; 47: 1193–1199.
28.
KhalilHASurayaNL. Anhydride modification of cultivated kenaf bast fibers: morphological, spectroscopic and thermal studies. Bioresources2011; 6: 1121–1135.
29.
KhalilHAHanidaSKangC, et al.Agro-hybrid composite: the effects on mechanical and physical properties of oil palm fiber (EFB)/glass hybrid reinforced polyester composites. J Reinf Plast Comp2007; 26: 203–218.
30.
KhalilHAFazitaMNJawaidM, et al.Empty fruit bunches as a reinforcement in laminated bio-composites. J Compos Mater2011; 45: 219–236.
LiXTabilLGPanigrahiS. Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review. J Polym Environ2007; 15: 25–33.
33.
JawaidM. Development and characterization of oil palm empty fruit bunch/jute fibres reinforced epoxy hybrid composites. PhD, Universiti Sains Malaysia, Malaysia, 2011.
34.
TroncEHernández-EscobarCAIbarra-GomezR, et al.Blue agave fiber esterification for the reinforcement of thermoplastic composites. Carbohyd Polym2007; 67: 245–255.
35.
TserkiVZafeiropoulosNESimonF, et al.A study of the effect of acetylation and propionylation surface treatments on natural fibres. Compos A Appl S2005; 36: 1110–1118.
36.
SgricciaNHawleyMCMisraM. Characterization of natural fiber surfaces and natural fiber composites. Compos A Appl S2008; 39: 1632–1637.
SreekalaMSKumaranMGThomasS.Oil palm fibers: morphology, chemical composition, surface modification, and mechanical properties. J Appl Polym Sci1997; 66: 821–835.
39.
AshoriASheshmaniS. Hybrid composites made from recycled materials: moisture absorption and thickness swelling behavior. Bioresource Technol2010; 101: 4717–4720.
40.
YangHSKimHJParkHJ, et al.Water absorption behavior and mechanical properties of lignocellulosic filler–polyolefin bio-composites. Compos Struct2006; 72: 429–437.
41.
Abdul KhalilHHanidaSKangC, et al.Agro-hybrid composite: the effects on mechanical and physical properties of oil palm fiber (EFB)/glass hybrid reinforced polyester composites. J Reinf Plast Comp2007; 26: 203–218.
42.
VanajaARaoR.Fibre fraction effects on thermal degradation behaviour of GFRP, CFRP and hybrid composites. J Reinf Plast Comp2002; 21: 1389–1398.
43.
KimHSYangHSKimHJ, et al.Thermogravimetric analysis of rice husk flour filled thermoplastic polymer composites. J Therm Anal Calorim2004; 76: 395–404.
