Effect of Fiber Loading on the Mechanical Properties of Kenaf and Fiberfrax Fiber-reinforced Phenol-Formaldehyde Composites

Abstract

In this study, mechanical properties such as tensile characteristics, flexural characteristics, impact strengths, and hardness of kenaf/phenol-formaldehyde (PF), fiberfrax/PF, and kenaf/fiberfrax hybrid PF composites have been investigated as a function of fiber loading. Composite samples were prepared by mixing the fibers and resin in a mixing chamber for 5 min. The composite sheets were prepared by pressing fiber-resin material in a steel mold at 120°C for 30 min at 10 MPa pressure. The test samples were cut from the composite sheets. At least five specimens were tested and mean value was taken for each composite according to ASTM standards. The reinforcing effects of kenaf and fiberfrax fibers were evaluated at various fiber loadings, that is, 19, 28, 36, 43, 52, and 62 vol. %. The hybrid effect of kenaf and fiberfrax fiber on the tensile, flexural, impact strengths, and hardness was also investigated for various ratios of kenaf/fiberfrax fiber loadings ranging between 1 : 0 and 0 : 1. Total fiber loading of the hybrid composites was 43 vol.%. The tensile, flexural strength, and hardness of the composites increased with increasing fiber loading up to 43 vol.% and decreased above this value for kenaf/PF composites. Impact strength of kenaf/PF composite showed a trend of increase with increasing fiber loading. The tensile and flexural strength of fiberfrax/PF composites increased by incorporation of fiberfrax fiber up to 36 vol. % and decreased beyond this value. However, the maximum impact strength and hardness were obtained for 52 vol. % fiberfrax fiber loading. The tensile, flexural, and impact strength values of fiberfrax/PF composites were found to be lower compared to kenaf/PF composites. With addition of fiberfrax fiber, the tensile, flexural, and impact strengths of the kenaf/fiberfrax hybrid PF composites decreased linearly and the hardness of the composite increased. The maximum hardness value was obtained for 0.25 : 0.75 kenaf/fiberfrax ratio.

Keywords

kenaf fiber fiberfrax fiber hybrid composites mechanical properties.

Get full access to this article

View all access options for this article.

References

Öztürk, S. (2005). The Effect of Fibre Content on the Mechanical Properties of Hemp and Basalt Fibre Reinforced Phenol Formaldehyde Composites, Journal of Materials Science, 40: 4585-4592.

Mohanty, A.K. , Wibowo, A. , Misra, M. and Drzal, L.T. (2004). Effect of Process Engineering on the Performance of Natural Fiber Reinforced Cellulose Acetate Biocomposites , Composites: Part A, 35: 363-370.

Nishino, T. , Hirao, K. , Kotera, M. , Nakamae, K. and Inagaki, H. ( 2003). Kenaf Reinforced Biodegradable Composite, Composites Science and Technology, 63(9): 1281-1286.

Cicala, G. , Cristaldi, G. , Recca, G. , Ziegmann, G. , El-Sabbagh, A. and Dickert, M. ( 2009). Properties and Performances of Various Hybrid Glass/Natural Fibre Composites for Curved Pipes, Materials and Design, 30: 2538-2542.

Ochi, S. ( 2008). Mechanical Properties of Kenaf Fibers and Kenaf/PLA Composites , Mechanics of Materials, 40: 446-452.

Zampaloni, M. , Pourboghrat, F. , Yankovich, S.A. , Rodgers, B.N. , Moore, J. , Drzal, L.T. , Mohanty, A.K. and Misra, M. (2007). Kenaf Natural Fiber Reinforced Polypropylene Composites: A Discussion on Manufacturing Problems and Solutions , Composites: Part A, 38: 1569-1580.

Mohanty, A.K. , Drzal, L.T. and Misra, M. (2002). Novel Hybrid Coupling Agent as an Adhesion Promoter in Natural Fiber Reinforced Powder Polypropylene Composites, Journal of Materials Science Letters, 21: 1885-1888.

Bullions, T.A. , Hoffman, D. , Gillespie, R.A. , Price-O’Brien , J. and Loos, A.C. (2006). Contributions of Feather Fibers and Various Cellulose Fibers to the Mechanical Properties of Polypropylene Matrix Composites, Composites Science and Technology, 66: 102-114.

Mohanty, A.K. , Misra, M. and Hinrichsen, G. (2000). Biofibres, Biodegradable Polymers and Biocomposites: An Overview, Macromolecular Materials and Engineering, 276/277: 1-24.

10.

Aziz, S.H. and Ansell, M.P. ( 2004). The Effect of Alkalization and Fibre Alignment on the Mechanical and Thermal Properties of Kenaf and Hemp Bast Fibre Composites: Part 1- Polyester Resin Matrix, Composites Science and Technology , 64: 1219-1230.

11.

Nishino, T. , Hirao, K. , Kotera, M. , Nakamae, K. and Inagaki, H. (2003). Kenaf Reinforced Biodegradable Composite, Composites Science and Technology, 63: 1281-1286.

12.

Arbelaiz, A. , Fernandez, B. , Cantero, G. , Llano-Ponte, R. , Valea, A. and Mondragon, I. (2005). Mechanical Properties of Flax Fibre/Polypropylene Composites. Influence of Fibre/Matrix Modification and Glass Fibre Hybridization, Composites: Part A, 36: 1637-1644.

13.

Thwe, M.M. and Liao, K. ( 2003). Durability of Bamboo-glass Fiber Reinforced Polymer Matrix Hybrid Composites, Composites Science and Technology, 63: 375-387.

14.

Mishra, S. , Mohanty, A.K. , Drzal, L.T. , Misra, M. , Parija, S. , Nayak, S.K. and Tripathy, S.S. ( 2003). Studies on Mechanical Performance of Biofibre/Glass Reinforced Polyester Hybrid Composites, Composites Science and Technology , 63: 1377-1385.

15.

Sreekala, M.S. , George, J. , Kumaran, M.G. and Thomas, S. (2002). The Mechanical Performance of Hybrid Phenol-Formaldehyde-based Composites Reinforced with Glass and Oil Palm Fibres, Composites Science and Technology, 62: 339-353.

16.

Çukurova Chemical Coor ( 2000). Catalog, Manisa, Turkey.

17.

International Jute Study Group WebSite (2009). http://www.bjri.gov.bd.

18.

Carborundum Resistant Materials GmbH (1988 ). Fiberfrax Catalog, Deutschland.

19.

Wambua, P. , Ivens, J. and Verpoest, I. ( 2003). Natural Fibres: Can they Replace Glass in Fibre Reinforced Plastics? Composites Science and Technology, 63: 1259-1264.

20.

Graupner, N. , Herrmann, A.S. and Müssig, J. ( 2009). Natural and Man-made Cellulose Fibre-reinforced Poly (Lactic Acid) (PLA) Composites: An Overview about Mechanical Characteristics and Application Areas, Composites: Part A, 40: 810-821.

21.

Jacob, M. , Thomas, S. and Varughese, K.T. ( 2004). Mechanical Properties of Sisal/Oil Palm Hybrid Fiber Reinforced Natural Rubber Composites, Composites Science and Technology, 64: 955-965.

22.

Joseph, S. , Sreekala, M.S. , Oommen, Z. , Koshy, P. and Thomas, S. ( 2002). A Comparison of the Mechanical Properties of Phenol Formaldehyde Composites Reinforced with Banana Fibres and Glass Fibres, Composites Science and Technology, 62: 1857-1868.

23.

Shibata, S. , Cao, Y. and Fukumoto, I. ( 2005). Press Forming of Short Natural Fiber-reinforced Biodegradable Resin: Effects of Fiber Volume and Length on Flexural Properties, Polymer Testing, 24: 1005-1011.

24.

Lee, N.J. and Jang, J. (1999). The Effect of Fibre Content on the Mechanical Properties of Glass Fibre Mat/Polypropylene Composites, Composites: Part A, 30: 815-822.