Sisal (Agavae family) fiber reinforced BOPP/thermoplastic LLDPE: LDPE blend was prepared by melt mixing in a hydraulic compression press extruder. The composite were prepared with different fiber content: 5%, 10%, 15%, 20% (by weight). Mechanical properties (i.e. tensile strength and impact strength) were studied. Tensile strength showed an increasing trend with increase in fiber content up to 15% then decreases. Impact strength increases with the increase in fiber content. SEM shows the morphology and the melting point and material identification by DSC analysis.
SapuanS.M., PuaF.I., ShekeilY.A., EI AL-OqlaF.M., Mechanical properties of soil buried kenaf fibre reinforced thermoplastic polyurethane composites. Material. Design.201350467–470.
2.
AL-OqlaF.M., SapuanS.M., Natural fiber reinforced polymer composites in industrial applications: feasibility of date palm fibers for sustainable automotive industry. J. Cleaner Prod.201466347–354.
3.
AL-OqlaF.M., AlothmanO.Y., JawaidM., SapuanS.M., SahebM.E., Processing and Properties of date palm fibers and its composite, Biomass Bioenergy, Springer, 2014, 2015, pp. 1–25.
4.
AL-OqlaF.M., SapuanS.M., IshakM.R., N.A.A., Postgraduate Symposium on Biocomposite Technology Serdang, Malaysia, 2015
LauK.-t, Hoi-van CheungK, HuiD.Nat. Fiber Compos Compos part B ENG2009: 40(7): 591–3
18.
EspinachF.X., JulianF., VerdaguerN., TorresL., PElachM.A., VilasecaF., Analysis of tensile and flexural modulus in hemp strands/polypropylene composites:Compos. Part B. Eng., 201347339–43.
19.
MutjeP., GironesJ., LopezA., LIopM.F., VilasecaF.Hemp Strands: PP composites by injection molding: effect of low cost physio-chemical treatments. J. Reinf. Plastics Compos., 200625(3) 313–27.
20.
ScarponiC., MessanoM.Comparative evaluation between E-glass and hemp fiber composite application in rotorcraft interior. Compos. Part B Eng., 201569542–9.
21.
ScarponiC., AndreottiC.Industrial applications of natural fibers advanced composites: environment effects and comparative life cycle analysis. Int. J. Mater. Prod. Technol., 200936(1) 241–60.
22.
KoronisG., SilvaA., FontulM.Green composites: a review of adequate materials for automotive applications, Compos. Part B Eng., 201344(1) 120–7.
23.
SangthongS., PongprayoonT., YanumetN.Mechanical property improvement of unsaturated polyester composite reinforced with admicellar-treated sisal fibers. Composites Part A: Applied Science and Manufacturing, 200940687–94.
24.
MegiattoJ.D.Jr, RamiresE.C., FrolliniE.Phenolic matrices and sisal fibers modified with hydroxy terminated polybutadiene rubber: impact strength, water absorption, and morphological aspects of thermosets and composites. Industrial Crops and Products, 201031178–84.
