Abstract
Solid-state light sources can be more prone to larger temporal light modulation (TLM) than conventional sources. TLM visibility depends on wave shape, frequency, modulation depth and duty cycle, and is affected by the sensitivity of the observer. TLM can be visible well above the critical flicker fusion frequency, when there is relative movement between the observer’s eyes and light source, lighted space or moving objects in the field of view. This human subjects experiment explored visibility of the stroboscopic effect (SE) versus the phantom array effect (PAE) with targeted tasks under 74 TLM waveforms. The results showed the SE visibility peaks between 90 Hz and 120 Hz, while the PAE visibility peaks between 500 Hz and 1000 Hz. The phantom array is visible to sensitive participants at 6000 Hz. Both effects are more visible under rectangular versus sinusoidal TLM, higher modulation, and when duty cycles are 10% or 30% versus 50%. Higher sensitivity participants, differentiated using the Leiden Visual Sensitivity Scale, rated TLM waveforms as more visible, especially those inherently harder to see. This work lays a foundation for a PAE metric and guides driver and dimmer designers toward electronic circuits that minimize the visibility of TLM in LED products.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
