Abstract
Light- and photosensitizer-based antimicrobial photodynamic therapy (aPDI) is a very promising approach to control microbial infections. Other applications of aPDI are also being studied, for example, in water disinfection or food preservation. Because this technology is based on the use of light, the proper characterization of light sources is of prime importance. The aim of this study was to prepare and characterize three irradiation systems constructed for research purposes. These LED-based light sources produce visible light in the range of blue, green and red wavelengths. The efficacy and light distribution produced by the light sources were verified on a Staphylococcus aureus model sensitized with three photosensitizers: protoporphyrin IX diarginate, N-methylpyrrolidinium fullerene iodide (Full), and rose bengal. Antimicrobial blue light treatment was likewise investigated. The survival of bacterial cells after photoinactivation was determined for irradiance at three power densities. Based on the proper characterization of light emitted by each LED at each point of the illuminated area, a homogeneous distribution of light can be achieved, which is crucial for precise dosimetry.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
