The intelligent transfer diagnosis model is used to address the issue of feature drift caused by the changing working conditions of rotating parts in engineering. However, few models can perform transfer diagnosis on multiple unbalanced samples of rotating parts simultaneously, and even fewer models can visually enhance the domain-invariant features, making them more interpretable. To address these issues, we propose a novel interpretable Siamese dual attention enhancement transfer compound diagnosis model for unbalanced samples. The model can diagnose multiple rotating parts simultaneously and consists of a channel feature attention enhancement (CFAE) network, a fragment feature attention enhancement (FFAE) network, and a Siamese feature fusion (SFF) network. The CFAE network enhances features of different convolutional channels, the FFAE network improves segment features in various frequency domains, and the SFF network extracts domain-invariant features of diverse rotating components under varying working conditions. The model is validated using bearing fault data collected under different loads and planetary gear fault data obtained at varying speeds. Its diagnostic accuracy remains above 96.4%, and the diagnostic variance is controlled within 1.0%. The model has good interpretability for imbalanced sample domain-invariant features, providing an effective tool for interpretable transfer diagnosis in this compound engineering situation.
LiuDCuiLChengW. Flexible generalized demodulation for intelligent bearing fault diagnosis under nonstationary conditions. IEEE Trans Industr Inform2023; 19: 2717–2728.
2.
FengKJiJCNiQ, et al. A novel vibration-based prognostic scheme for gear health management in surface wear progression of the intelligent manufacturing system. Wear2023; 522: 204697.
3.
PangBNazariMSunZ, et al. An optimized variational mode extraction method for rolling bearing fault diagnosis. Struct Health Monit2022; 21: 558–570.
4.
FengKNiQBeerM, et al. A novel similarity-based status characterization methodology for gear surface wear propagation monitoring. Tribol Int2022; 174: 107765.
5.
HuangJCuiLZhangJ. Novel morphological scale difference filter with application in localization diagnosis of outer raceway defect in rolling bearings. Mech Mach Theory2023; 184: 105288.
6.
HaidongSZiyangDJunshengC, et al. Intelligent fault diagnosis among different rotating machines using novel stacked transfer auto-encoder optimized by PSO. ISA Trans2020; 105: 308–319.
7.
KerkhofPGinsGVanlaerJ, et al. Dynamic model-based fault diagnosis for (bio)chemical batch processes. Comput Chem Eng2012; 40: 12–21.
8.
JiangXWangJShiJ, et al. A coarse-to-fine decomposing strategy of VMD for extraction of weak repetitive transients in fault diagnosis of rotating machines. Mech Syst Signal Process2019; 116: 668–692.
9.
XuKLiSJiangX, et al. A novel transfer diagnosis method under unbalanced sample based on discrete-peak joint attention enhancement mechanism. Knowl Based Syst2021; 212: 106645.
10.
GanMWangCZhuCA. Construction of hierarchical diagnosis network based on deep learning and its application in the fault pattern recognition of rolling element bearings. Mech Syst Signal Process2016; 72: 92–104.
11.
FengKJiJCNiQ. A novel gear fatigue monitoring indicator and its application to remaining useful life prediction for spur gear in intelligent manufacturing systems. Int J Fatigue2023; 168: 107459.
12.
YinJZhaoW. Fault diagnosis network design for vehicle on-board equipments of high-speed railway: a deep learning approach. Eng Appl Artif Intell2016; 56: 250–259.
13.
GuoLLeiYXingS, et al. Deep convolutional transfer learning network: a new method for intelligent fault diagnosis of machines with unlabeled data. IEEE Trans Ind Electron2018; 66: 7316–7325.
14.
XuKLiSLiR, et al. Cross-domain intelligent diagnostic network based on enhanced attention features and characteristics visualization. Meas Sci Technol2021; 32: 114009.
15.
YangBLeiYJiaF, et al. A polynomial kernel induced distance metric to improve deep transfer learning for fault diagnosis of machines. IEEE Trans Ind Electron2019; 67: 9747–9757.
16.
LuWLiangBChengY, et al. Deep model based domain adaptation for fault diagnosis. IEEE Trans Ind Electron2017; 64: 2296–2305.
17.
LiXJiangHWangR, et al. Rolling bearing fault diagnosis using optimal ensemble deep transfer network. Knowl Based Syst2020; 213: 106695.
18.
JiaoJZhaoMLinJ, et al. Residual joint adaptation adversarial network for intelligent transfer fault diagnosis. Mech Syst Signal Process2020; 145: 106962.
19.
LiRLiSXuK, et al. Deep domain adaptation with adversarial idea and coral alignment for transfer fault diagnosis of rolling bearing. Meas Sci Technol2021; 32: 094009.
20.
ChenLXuGZhangQ, et al. Learning deep representation of imbalanced SCADA data for fault detection of wind turbines. Measurement2019; 139: 370–379.
21.
DuanAGuoLGaoH, et al. Deep focus parallel convolutional neural network for imbalanced classification of machinery fault diagnostics. IEEE Trans Instr Meas2020; 69: 8680–8689.
22.
XuKLiSJiangX, et al. A renewable fusion fault diagnosis network for the variable speed conditions under unbalanced samples. Neurocomputing2020; 379: 12–29.
23.
WuZZhangHGuoJ, et al. Imbalanced bearing fault diagnosis under variant working conditions using cost-sensitive deep domain adaptation network. Expert Syst Appl2022: 193: 116459.
24.
ZhaoBZhangXHaiL, et al. Intelligent fault diagnosis of rolling bearings based on normalized CNN considering data imbalance and variable working conditions. Knowl Based Syst2020; 199: 105971.
25.
GengYWangZJiaL, et al. Bogie fault diagnosis under variable operating conditions based on fast kurtogram and deep reesidual learning towards imbalanced data. Measurement2020; 166: 108191.
26.
LeiYHeZZiY. A new approach to intelligent fault diagnosis of rotating machinery. Expert Syst Appl2008; 35: 1593–1600.
27.
LiHHunagJJiS. Bearing fault diagnosis with a feature fusion method based on an ensemble convolutional neural network and deep neural network. Sensors2019; 19: 2034–2046.
28.
LiXZhangWDingQ. Understanding and improving deep learning-based rolling bearing fault diagnosis with attention mechanism. Signal Process2019; 161: 136–154.
29.
VaswaniAShazeerNParmarN, et al. Attention is all you need. Adv Neural Inf Process Syst2017; 30.
30.
XuKLiSLiR, et al. Siamese distinguishing features attentional enhancement transfer fault diagnosis method for variable rotational speed. IEEE Access2021; 99: 1–1.
31.
WangHLiuZPengD, et al. Understanding and learning discriminant features based on multiattention 1DCNN for wheelset bearing fault diagnosis. IEEE Trans Ind Inform2020; 16: 5735–5745.
32.
DengYHuangDDuS, et al. A double-layer attention based adversarial network for partial transfer learning in machinery fault diagnosis. Comput Ind2021; 127: 103399.
33.
ZhangXHeCLuY, et al. Fault diagnosis for small samples based on attention mechanism. Measurement2021; 187(8):110242.
34.
O’SheaKNashR. An introduction to convolutional neural networks. arXiv preprint arXiv2015: 1511.08458.
35.
IoffeSSzegedyC. Batch normalization: accelerating deep network training by reducing internal covariate shift. In: International conference on machine learning, Lille, 6–11 July 2015, pp. 448–456. PMLR.
36.
BilgicBChatnuntawechIFanAP, et al. Fast image reconstruction with L2-regularization. J Magn Reson Imaging2014; 40: 181–191.
37.
WangZHeXYangB, et al. Subdomain adaptation transfer learning network for fault diagnosis of roller bearings. IEEE Trans Ind Electron2022; 69: 8430–8439.
38.
FuJLiuJTianH, et al. Dual attention network for scene segmentation, In: Proceedings of the IEEE/CVF conference on computer vision and pattern recognition, Long Beach, CA, 15–20 June 2019, pp. 3146–3154. IEEE.
39.
ChopraSHadsellRLecunY. Learning a similarity metric discriminatively, with application to face verification, In: 2005 IEEE computer society conference on computer vision and pattern recognition (CVPR’05), San Diego, CA, 20–25 June 2005, pp. 539–546. IEEE.
40.
KingmaDPJimmyB. Adam: a method for stochastic optimization. arXiv preprint arXiv:1412.6980, 2014.
41.
DagaAPFasanaAMarchesielloS, et al. The Politecnico di Torino rolling bearing test rig: description and analysis of open access data. Mech Syst Signal Process2019; 120: 252–273.
