Fatigue crack detection performance comparison in a composite wind turbine rotor blade

Abstract

This article presents the detection performance results for multiple detectors or test statistics, using different active-sensing hardware systems in identifying the presence and location of a through-thickness fatigue crack in a 9-m composite wind turbine rotor blade. The rotor blade underwent ~8.5 million cycles of fatigue loading until failure, when a 30-cm-long crack surfaced on the leading edge portion of the blade’s transitional root area. The rotor blade was cantilevered on a 7-ton test stand and excited using a hydraulically actuated resonant excitation system, which drove the rotor blade at its first natural frequency. Through the course of the test, data were collected using two distinct types of acquisition hardware: one designed for ultrasonic-guided wave interrogation and the other for diffuse wave field interrogation. This article presents the fatigue crack detection performance results for several hardware and test statistic combinations.

Keywords

Fatigue crack detection performance wind turbine rotor blade guided waves diffuse wave field composite structures

Get full access to this article

View all access options for this article.

References

20% wind energy by 2030: increasing wind energy’s contribution to US electricity supply. 2008. United States Department of Energy, July.

Kay

. Fundamentals of statistical signal processing, vol. 2. Upper Saddle River, NJ: Prentice Hall-PTR, 1998.

Flynn

Todd

Wilcox

. Maximum-likelihood estimation of damage location in guided-wave structural health monitoring. Proc R Soc Lond Ser A, Math Phys Eng Sci 2011; 467(2133): 2575–2596.

Stull

Hemez

Farrar

. On assessing the robustness of structural health monitoring technologies. Struct Health Monit. Epub ahead of print 15 August 2012. DOI: 10.1177/1475921712451956.

Berry

. Design of 9-meter carbon-fiberglass prototype blades: CX-100 and TX-100. SAND2007-0201, 2007. Albuquerque, NM: Sandia National Laboratories. September 2007.

Flynn

Todd

. A Bayesian approach to optimal sensor placement for structural health monitoring with application to active sensing. Mech Syst Signal Proc 2010; 24(4): 891–903.

Deines

Marinone

Schultz

. Modal analysis and SHM investigation of CX-100 wind turbine blade. In: Proulx

(ed.) Rotating machinery, structural health monitoring, shock and vibration, vol. 5. New York: Springer, 2011, pp. 413–438.

LeBlanc

Niezrecki

Avitabile

Sherwood

Chen

. (2012), “Surface Stitching of a Wind Turbine Blade Using Digital Image Correlation,” Topics in Modal Analysis II. vol. 31, Allemang

De Clerck

Niezrecki

Blough

, Eds., edition, pp. 277–284, Springer New York.

Rumsey

Paquette

White

. Experimental results of structural health monitoring of wind turbine blades. In: 46th AIAA Aerospace Sciences Meeting, held 7–10 January 2008, in Reno, NV.

10.

Park

Taylor

Kevin

. SHM of wind turbine blades using piezoelectric active-sensors. In: Fifth European workshop on structural health monitoring, Sorrento, Italy, June 28, 2010, DEStech Publications, Inc. pp. 321–326.

11.

Farrar

Worden

. An introduction to structural health monitoring. Philos Trans R Soc Lond Ser A Math Phys Eng Sci 2007; 365(1851): 303–315.

12.

Haynes

Todd

Flynn

Croxford

. Statistically-based damage detection in geometrically-complex structures using ultrasonic interrogation. Struct Health Monit. Epub ahead of print 21 December 2012, DOI: 10.1177/1475921712466756.

13.

Croxford

Moll

Wilcox

. Efficient temperature compensation strategies for guided wave structural health monitoring. Ultrasonics 2010; 50(4–5): 517–528.

14.

Lobkis

Weaver

. On the emergence of the Green’s function in the correlations of a diffuse field. J Acoust Soc Am 2001; 110(6): 3011–3017.

15.

Michaels

Cobb

Michaels

. A comparison of feature-based classifiers for ultrasonic structural health monitoring. In: SPIE smart structures/NDE, San Diego, CA, July 21, 2004, SPIE. pp. 363–374.

16.

Yinghui

Michaels

. Feature extraction and sensor fusion for ultrasonic structural health monitoring under changing environmental conditions. IEEE Sens J 2009; 9(11): 1462–1471.

17.

Farinholt

Taylor

Park

. Full-scale fatigue tests of CX-100 wind turbine blades. Part I: testing. In: SPIE smart structures/NDE, San Diego, CA, March 11, 2012, SPIE. pp. 83430P–83430P-8.

18.

Taylor

Jeong

Jang

. Full-scale fatigue tests of CX-100 wind turbine blades. Part II: analysis. In: SPIE smart structures/NDE, San Diego, CA, March 11, 2012, SPIE. pp. 83430Q–83430Q-10.

19.

Taylor

Choi

Jeong

. Incipient crack detection in composite wind turbine blades. In: Advances in structural health management and composite structures, Jeonju, Republic of Korea, August 29–31 2012.

20.

Kessler

Dunn

Borgen

. A cable-free digital sensor-bus for structural health monitoring of large area composite structures. In: Presented at the annual conference of the prognostics and health management society, October 16, 2009.