An Improved Conjugated Beam Method for Deformation Monitoring with a Distributed Sensitive Fiber Optic Sensor

Abstract

Based on the distributed fiber optic sensing technique of pulse-prepump Brillouin Optical Time Domain Analysis, this paper proposes an improved conjugated beam method (ICBM) for distributed structural deformation monitoring. Because ICBM is suitable for the combined actions of loads, support settlements and temperature variations, it extends the application of the classical conjugated beam method. Other advantages include the linear and explicit relationship between structural deformation and strain and the fact that all calculation parameters can be easily determined free from random load or section stiffness distribution. Theoretical and experimental investigations are carried out to confirm that the accuracy of deformation monitoring with ICBM in one span of a continuous structure is related only to the accuracy of strain measurements for the same span. This characteristic is used to avoid the influence of strain measurement error accumulation from a series of strain measurement data on other spans. Such accumulation can result in uncontrolled deviation of monitoring deformation with the classical double integration method. In order to further increase the accuracy of deformation monitoring, a new distributed sensitive fiber optic sensor (DSFOS) is proposed to improve the accuracy of strain measurement with good designability according to detailed sensing requirements. The results of a uniaxial tensile experiment show that the strain measurements from DSFOSs agree well with the true values, and the measuring standard deviations appear to be lower than those obtained from UV coating fiber optic sensor. The flexural experimental results from reinforced concrete beams show that the obtained structural deflection data agree with the values observed from digital indicators. Relative to common fiber optic sensors, DSFOSs can obtain deformation and strain with higher accuracy to show applicability for daily monitoring.

Keywords

deformation monitoring improved conjugated beam method distributed fiber optic sensing structural health monitoring strain sensitivity enhancement

Get full access to this article

View all access options for this article.

References

Inaudi, D. , Vurpillot, S. , Casanova, N. and Osa-Wyser, A. ( 1996). Development and field test of deformation sensors for concrete embedding. In: SPIE, Smart Structures and Materials, San Diego, USA.

Vurpillot, S. , Daniele Inaudi, D. and Scano, A. ( 1996). Mathematical model for the determination of the vertical displacement from internal horizontal measurements of a bridge, SPIE, Smart Structures and Materials, San Diego, USA.

Inaudi, D. , Casanova, N. and Vurpillot, S. ( 1999). Bridge deformation monitoring with fiber optic sensors . In: IABSE Symposium, Rio de Janeiro, pp. 475-482.

Cho, N. , Kim, N. , Jang, J. and Chang, S. ( 2000). Estimation of deflection curve of bridges using fiber optic strain sensors. In: Liu, S.C. (ed.), Smart Structures and Materials 2000:Smart System for Bridges, Structures, and Highways. Proceeding of SPIE, Newport Beach, CA, USA, Vol. 3988, pp. 339-348.

Cho, N.-S. and Kim, N.-S. (2004). Estimating deflection of a simple beam model using fiber optic bragg-grating sensors. Experimental Mechanics, 44(4), 433-439.

Matta, F. , Galati, N. , Bastianini, F. , Casadei, P. and Nanni, A. ( 2006). Distributed strain and non-contact deflection measurement in multi-span highway bridge. Proceedings of the Structural Faults & Repair, Edinburgh, UK, 13-15 June.

Kumagai, H. , Mita, A. , Oka, K. and Ohno, H. ( 2000). Development and verification of the fiber optic sensor for concrete structures. Concrete Journal, 38(7), 17-21. (In Japanese).

Mohamad, H. , Bennett, P. , Soga, K. , Klar, A. and Pellow, A. ( 2007). Distributed fiber optic strain sensingin a secant piled wall. In: ASCE Conference. Proceedings of the 7th International Symposium on Field Measurements in Geomechanics, Boston Massachusetts, USA.

Zhang, H. and Wu, Z.S. ( 2008). Performance evaluation of BOTDR-based distributed fiber optic sensors for crack monitoring. Structural Health Monitoring , 7(2), 143-156.

10.

Zhang, H. , Wu, Z.S. and Iwashita, K. ( 2007). Performance evaluation of BOTDA based distributed fiber optic sensors for crack monitoring. Proceedings of the Japan Concrete Institute, 29(2), 739-744.

11.

Ding, Y. , Shi, B. , Cui, H.L. , Gao, J.Q. and Chen, B. ( 2003). The stability of optic fiber as strain sensor under invariable stress. In: Proceedings of the 1st International Conference of Structural Health Monitoring and Intelligent Infrastructure , Balkema, Netherlands, pp. 267-270.

12.

Zhang, H. and Wu, Z.S. ( 2007). Development of no-slip optic fibers as Brillouin scattering based distributed sensors. In: Proceedings of the International Conference of Health Monitoring of Structure, Material and Environment , Nanjing, China, pp. 540-547.

13.

Horiguchi, T. and Tateda, M. (1989). BOTDA-nondestructive measurement of single-mode fiber optic attenuation characteristics using Brillouin interaction: theory. Journal of Lightwave Technology, 7(8), 1170-1176.

14.

Kishida, K. and Li, C.H. ( 2006). Pulse pre-pump-BOTDA technology for new generation of distributed strain measuring system. In: Proceedings of the Structural Health Monitoring and Intelligent Infrastructure, London, UK, pp. 471-477.

15.

Kishida, K. , Li, C.H. and Nishiguchi, K. ( 2005). Pulse pre-pump method for cm-order spatial resolution of BOTDA. Proceeding of SPIE, 17th International Conference on Fiber optic Sensors, 5855, 559-562.

16.

Hibbeler, R.C. (1990). Deflections, Structural Analysis, 2nd edn, pp. 330-340, New York: Collier Macmillan.

17.

Li, S.Z. ( 2007). Structural health monitoring strategy based on distributed fiber optic sensing. Ph.D. Dissertation, Ibaraki University, Hitachi, Japan.