The effect of tip clearance in an axial fan on its aerodynamic and aeroacoustic performance is investigated experimentally as well as via a Lattice–Boltzmann flow simulation method. An increase in tip clearance degrades fan pressure rise and efficiency, but also increases significantly the overall sound power emitted by the fan. A large tip clearance causes a clear structure of well distinguishable unsteady vortices which interact with neighboring blades and hence produce an increase in broadband sound. Moreover, if, compared to the design flow rate, there is a moderate flow rate reduction, the local tip vortex systems of all individual blade tips form a circumferentially coherent flow structure, resulting in distinct humps of sound pressure in the acoustic far field. By means of a rigid ring-type protrusion fixed to the inner casing wall, the generation of the tip clearance vortices and slowly rotating coherent flow structures could be suppressed. As a consequence, the sound emitted by the fan is substantially reduced.
Zhu T. On the flow induced tip clearance noise in axial fans. Dr.-Ing. Dissertation Universität Siegen, published as Berichte aus der Strömungstechnik, Shaker Verlag, Aachen, 2016.
2.
MarcinowskiH. Einfluß des Laufradspaltes und der Luftführung bei einem Kühlgebläse axialer Bauart. MTZ1953; 14: 259–262.
3.
LonghouseRE. Control of tip-vortex noise of axial flow fans by rotating shrouds. J Sound Vib1978; 58: 201–214.
4.
KhorramiMRLiFChoudhariM. Novel approach for reducing rotor tip-clearance-induced noise in turbofan engines. AIAA J2002; 40: 1518–1528.
5.
FukanoTJangC-M. Tip clearance noise of axial flow fans operating at design and off-design condition. J Sound Vib2004; 275: 1027–1050.
6.
JangC-MFukanoTFurukawaM. Effects of the tip clearance on vortical flow and its relation to noise in an axial flow fan. JSME Int J2003; 46: 356–365. .
7.
KameierFNeiseW. Rotating blade flow instability as a source of noise in axial turbomachines. J Sound Vib1997; 203: 833–853.
8.
Baumgartner M, Kameier F and Hourmouziadis J. Non-engine order blade vibration in a high pressure compressor. Conference paper: of the 12th International symposium on airbreathing engines, Melbourne, Australia, 10–15 September 1995.
9.
PardowitzBTapkenUSorgeRet al.Rotating instability in an annular cascade: detailed analysis of the instationary flow phenomena. J Turbomach2014; 136(6): 061017-061017-10.
10.
PardowitzBTapkenUNeuhausLet al.Experiments on an axial fan stage: time-resolved analysis of rotating instability modes. J Eng Gas Turbines Power2015; 137: 6.
11.
MärzJHahCNeiseW. An experimental and numerical investigation into the mechanisms of rotating instability. J Turbomach2002; 124: 367–375.
12.
YouDWangMMoinPet al.Study of tip-clearance flow in turbomachines using large-eddy simulation. Comput Sci Eng2004; 6(6): 38–46.
13.
YouDWangMMoinPet al.Effects of tip-gap size on the tip-leakage flow in a turbomachinery cascade. Phys Fluids2006; 18: 105102–14.
14.
Cahuzac A, Boudet J, Jacob MC, et al. Large-eddy simulation of a rotor tip-clearance flow. Conference paper: 17th AIAA/CEAS Aeroacoustics conference (32nd AIAA aeroacoustics conference), Portland, Oregon, USA, 5–8 June 2011.
15.
BoudetJCahuzacAKauschePet al.Zonal large-eddy simulation of a fan tip clearance flow, with evidence of vortex wandering. J Turbomach2014; 137: 6.
16.
YouDWangMMoinPet al.Vortex dynamics and low-pressure fluctuations in the tip-clearance flow. J Fluids Eng2007; 129: 1002–1014.
17.
Pérot F, Kim M-S, Moreau S, et al. Direct aeroacoustics prediction of a low speed axial fan. Conference paper: 16th AIAA/CEAS Aeroacoustics conference, Stockholm, Sweden, 7–9 June 2010.
18.
Mann A, Perot F, Kim M-S, et al. Advanced noise control fan direct aeroacoustics predictions using a Lattice-Boltzmann method. Conference paper: 18th AIAA/CEAS Aeroacoustics conference, Colorado Springs, CO, USA, 4–6 June 2012.
19.
Magne S, Sanjosé M, Moreau S, et al. Numerical optimization of fan tonal noise control using acoustic modulation of slowly-rotating obstructions. Conference paper: 20th AIAA/CEAS Aeroacoustics conference, Atlanta, GA, USA, 16–20 June 2014.
20.
Piellard M, Coutty B, Le Goff V, et al. Direct aeroacoustics simulation of automotive engine cooling fan system: effect of upstream geometry on broadband noise. Conference paper: 20th AIAA/CEAS Aeroacoustics conference, Atlanta, GA, USA, 16–20 June 2014.
21.
Zhu T, Sturm M, Carolus TH, et al. Experimental and numerical investigation of tip clearance noise of an axial fan using a Lattice Boltzmann method. Conference paper: the 21st International congress on sound and vibration, Beijing, China, 13–17 July 2014.
22.
Zhu T and Carolus T. Experimental and numerical investigation of tip clearance noise of an axial fan using a Lattice Boltzmann method. Conference paper: FAN2015, Lyon, France, 15–17 April 2015.
23.
KameierFNeiseW. Experimental study of tip clearance losses and noise in axial turbomachines and their reduction. J Turbomach1997; 119: 460–471.
24.
Karstadt S, Matyschok B and Pelz PF. Sound deadening on fans. In: Proceedings of the ASME turbo expo, Vancouver, Canada, 2011, 06–10 June, 2010, 7: 961–971, Turbomachinery, Parts A, B, and C.
25.
CarolusTZhuTSturmM. A low pressure axial fan for benchmarking prediction methods for aerodynamic performance and sound. Noise Control Eng J2015; 63: 6.
26.
DIN Deutsches Institut für Normung e.V. DIN 24163-2: Ventilatoren, Teil 2: Leistungsmessung – Normprüfstände (fans, part 2: performance tests – standardized test rigs), Berlin: Beuth Verlag, 1985.
27.
ISO International Organization for Standardization. ISO 13347-3: industrial fans – determination of fan sound power levels under standardized laboratory conditions, part 3: enveloping surface methods, Geneva, Switzerland: ISO International Organization for Standardization, 2004. .
28.
Zhu T and Carolus T. Akustische nachrechnung von ventilatoren (acoustic evaluation of fans). Final report F60 001 B of the Universität Siegen, Project No. AiF 16773 N/2, Frankfurt/M: Institute for Fluid- and Thermodynamics, University of Siegen to the Forschungsvereinigung für Luft- und Trocknungstechnik e. V. (FLT), 2012.
29.
ChenSDoolenGD. Lattice Boltzmann method for fluid flows. Annu Rev Fluid Mech1998; 30: 329–364.
Kotapati R, Keating A, Kandasamy S, et al. The Lattice–Boltzmann-VLES method for automotive fluid dynamics simulation, a review. SAE technical paper 2009-26-0057, 2009.
32.
TeixeiraCM. Incorporating turbulence models into the Lattice-Boltzmann method. Int J Mod Phys C1998; 9: 1159–1175.
33.
Pérot F, Moreau S, Kim M-S, et al. Direct aeroacoustics prediction of a low speed axial fan. Conference paper: 16th AIAA/CEAS Aeroacoustics conference, Stockholm, Sweden, 7–9 June 2010.
34.
Brès GA, Pérot F and Freed D. Properties of the Lattice–Boltzmann method for acoustics. Conference paper: 15th AIAA/CEAS Aeroacoustics conference (30th AIAA aeroacoustics conference), Miami, Florida, USA, 11–13 May 2009.
35.
Sturm M and Zhu T. Erprobung und Validierung der Lattice–Boltzmann-Simulationsmethode zur aerodynamischen und akustischen Berechnung eines Axialventilators. Final report, IGF-Vorhaben 18185 N/1. University of Siegen, Institute of Fluid- and Thermodynamics, Nr. F020 002 A, Siegen, Germany, 2015.
36.
SturmMCarolusTH. Tonal fan noise of an isolated axial fan rotor due to inhomogeneous coherent structures at the intake. Noise Control Eng J2012; 60: 699–706.
37.
Sturm M. Tonal noise of axial fans induced by large-scale inflow distortions. Dr.-Ing. Disseration Universität Siegen, published as Berichte aus der Strömungstechnik, Shaker Verlag, Aachen, 2016.
38.
Sturm M, Zhu T and Carolus TH. Erprobung und Validierung der Lattice–Boltzmann-Simulationsmethode zur aerodynamischen und akustischen Berechnung eines Axialventilators. Unpublished report no. F030 002 A. Institut für Fluid- und Thermodynamik, Universität Siegen to the Forschungsgemeinschaft Luft- und Trocknungstechnik (FLT) e.V., Grant no. IGF 18185 N/1, Siegen, Germany, 2015.
