The lattice Boltzmann method has superiority over conventional computational fluid dynamics methods, particularly for the flow simulations in complex geometries. In the present work, the performance of hydrodynamic lemon-bore (elliptical) journal bearings was investigated with the implementation of the lattice Boltzmann method. The steady-state laminar flow of a homogeneous oil was considered in the computations. A linear interpolation method was exploited to obtain the surface curvatures. The comparison of the results obtained from the proposed methodology with available literature data showed a satisfactory agreement. The effect of geometrical parameters on the hydrodynamic lubrication in an elliptical journal bearing was analyzed. It was found that the ellipticity ratio has profound effects on the bearing load capacity, oil flow rate and bearing power loss.
KhonsariM. A review of thermal effects in hydrodynamic bearings. Part II: journal bearings. ASLE Trans1987; 30: 26–33.
2.
BritoFP, et al.Experimental investigation of the influence of supply temperature and supply pressure on the performance of a two-axial groove hydrodynamic journal bearing. J Tribol2006; 129: 98–105.
3.
BritoFP, et al.The role of lubricant feed temperature on the performance of twin groove journal bearings: an experimental study. Int J Surf Sci Eng2011; 5: 286–299.
4.
BritoFP, et al.Experimental comparison of the performance of a journal bearing with a single and a twin axial groove configuration. Tribol Int2012; 54: 1–8.
5.
BritoF, et al.Thermohydrodynamic modelling of journal bearings under varying load angle and negative groove flow rate. Proc IMechE, Part J: J Engineering Tribology2014; 228: 955–973.
6.
BritoF, et al.The role of lubricant feeding conditions on the performance improvement and friction reduction of journal bearings. Tribol Int2014; 72: 65–82.
7.
BritoF, et al.Thermohydrodynamic modelling of journal bearings under varying load angle and negative groove flow rate. Proc IMechE, Part J: J Engineering Tribology2014; 228: 955–973.
8.
Arab SolgharA, et al.Numerical study of twin groove journal bearings performance under steady-state condition. Lubricat Sci2015; 27: 83–102.
9.
Arab SolgharABritoFClaroJ. An experimental investigation on the influence of deactivation of a groove on the performance of a twin groove journal bearing. Proc IMechE, Part J: J Engineering Tribology2014; 228: 548–557.
10.
Arab SolgharA, et al.An experimental study of the influence of loading direction on the thermohydrodynamic behaviour of twin axial groove journal bearing. Proc IMechE, Part J: J Engineering Tribology2011; 225: 245–254.
11.
Arab SolgharAGandjalikhan NassabS. Numerical analysis of turbulent lubrication in plain full journal bearings. Ind Lubr Tribol2013; 65: 91–99.
12.
Arab SolgharAGandjalikhan NassabSA. Thermohydrodynamic behaviors of finite journal bearings with cavitation. Méc Ind2011; 12: 5–15.
13.
SolgharAA. Investigation of nanoparticle additive impacts on thermohydrodynamic characteristics of journal bearings. Proc IMechE, Part J: J Engineering Tribology2015; 229: 1176–1186.
14.
SolgharAA, et al.An experimental study of the influence of loading direction on the thermohydrodynamic behaviour of twin axial groove journal bearing. Proc IMechE, Part J: J Engineering Tribology2011; 225: 245–254.
15.
SolgharAAGandjalikhan NassabS. The investigation of thermohydrodynamic characteristic of single axial groove journal bearings with finite length by using CFD techniques. Int J Comput Meth2013; 10: 1350031–13500322.
16.
SolgharAAGandjalikhan NassabS. Thermohydrodynamic behaviors of finite journal bearings with cavitation. Méc Ind2011; 12: 5–15.
17.
SolgharAANassabSG. A numerical study of circular journal bearings running under turbulent regime. Int J Fluid Mech Res2011; 38: 409–423.
18.
SolgharAANassabSG. An analysis of turbulent flow in finite journal bearing under steady state conditions using k-epsilon model. Int Rev Mech Eng2010; 4: 648–655.
19.
MaM-TTaylorC. An experimental investigation of thermal effects in circular and elliptical plain journal bearings. Tribol Int1996; 29: 19–26.
20.
MishraPPandeyRAthreK. Temperature profile of an elliptic bore journal bearing. Tribol Int2007; 40: 453–458.
21.
NairKPNairVSJayadasN. Static and dynamic analysis of elastohydrodynamic elliptical journal bearing with micropolar lubricant. Tribol Int2007; 40: 297–305.
22.
ChauhanASehgalRSharmaRK. Thermohydrodynamic analysis of elliptical journal bearing with different grade oils. Tribol Int2010; 43: 1970–1977.
23.
ChauhanASehgalRSharmaRK. Investigations on the thermal effects in non-circular journal bearings. Tribol Int2011; 44: 1765–1773.
24.
HeXLuoL-S. Theory of the lattice Boltzmann method: From the Boltzmann equation to the lattice Boltzmann equation. Phys Rev E1997; 56: 6811–6811.
25.
KucinschiBRAfjehAA. A Lattice-Boltzmann approach to fluid film lubrication. J Tribol2010; 132: 021705–021705.
26.
NickaeenMJafariSRahnamaM. Simulation of macro and micro journal bearings: using the lattice Boltzmann method. Proc IMechE, Part J: J Engineering Tribology2012; 226: 760–768.
27.
SolgharAA. Three-dimensional hydrodynamic analysis of journal bearings using lattice Boltzmann method. Proc IMechE, Part J: J Engineering Tribology2016; 230: 817–826.
d’HumièresD. Multiple–relaxation–time lattice Boltzmann models in three dimensions. Philos Trans R Soc Lond Ser A Math Phys Eng Sci2002; 360: 437–451.
30.
LallemandPLuoL-S. Theory of the lattice Boltzmann method: Acoustic and thermal properties in two and three dimensions. Phys Rev E2003; 68: 036706–036706.
31.
SkordosP. Initial and boundary conditions for the lattice Boltzmann method. Phys Rev E1993; 48: 4823–4823.
32.
BouzidiMhFirdaoussMLallemandP. Momentum transfer of a Boltzmann-lattice fluid with boundaries. Phys Fluid2001; 13: 3452–3459.
33.
HussainA, et al.Thermal analysis of noncircular bearings. J Tribol1996; 118: 246–254.
