Determination of arsenic,cadmium,mercury,lead and nickel as elemental impurities in atorvastatin calcium by inductively coupled mass spectrometer

Abstract

Atorvastatin calcium is employed as front-line treatment for cardiovascular diseases. According to the international conference on harmonization (ICH) guideline ICH Q3D, elemental impurities can come into drug products from various sources. These elemental impurities do not have any therapeutic benefit to the end-user. On the contrary, it harms the normal physiological system. Class 1 elements like arsenic, cadmium, mercury, and lead are inorganic impurities that can cause toxic effects on the human body. Nickel was used as a catalyst during the synthesis process of atorvastatin calcium. It comes under the Class-2A, can cause toxicity to humans, and must be quantified. A simple, fast, reliable inductively coupled plasma mass spectrometric method for the estimation of elemental impurities like arsenic, cadmium, mercury, lead, and nickel in atorvastatin calcium by open sample digestion technique was developed and validated in accordance with ICH Q3D and USP < 232 > and USP <233 > general chapter. Internal standards like indium, terbium, thallium, bismuth and yttrium were used to correct the non-spectral interferences that were generated during analysis. Gold was added to all solutions as it preserves mercury by amalgamation. The system performance was evaluated every time my performing system suitability parameters. The limits for all the elements were fixed in accordance with ICH Q3D. The limit of detection and the limit of quantification for all the five elements were estimated. Method specificity was proven by checking for interferences due to the sample matrix and other elements. Linearity of each element in standards was established from 25% to 200% of sample concentration, and correlation coefficients were found to be not less than 0.999. The accuracy of the method was demonstrated at three spiking levels at 50%, 100%, and 150% of the J-value for all the elements. The recoveries for all elements at each level were within the range of 90–120%. Method precision was proved at 100% J-value. The relative standard deviation of all elements was less than 5%. It concludes that this newly developed and validated reliable inductively coupled plasma mass spectrometric method for estimating of elemental impurities like arsenic, cadmium, mercury, lead, and nickel in atorvastatin calcium was within the permitted limit and suitable for routine use.