Model-based compressor surge avoidance algorithm for internal combustion engines utilizing cylinder deactivation during motoring conditions

Abstract

Cylinder deactivation is an efficient strategy for diesel engine exhaust aftertreatment thermal management. Temperatures in excess of 200 °C are necessary for peak NO _x conversion efficiency of the aftertreatment system. However, during non-fired engine operation, known as motoring, conventional diesel engines pump low-temperature air through the aftertreatment system. One strategy to mitigate this is to deactivate valve motion during engine motoring. There is a specific condition where care must be taken to avoid compressor surge during the onset of valve deactivated motoring when following high load operation. This study proposes and validates an algorithm which (1) predicts the intake manifold pressure increase instigated while transitioning into cylinder deactivation during motoring, (2) estimates future mass air flow, and (3) avoids compressor surge by implementing staged cylinder deactivation during the onset of engine motoring operation.