The interaction between compression ratio,boosting and variable valve actuation for high load homogeneous charge compression ignition: A modeling study

Abstract

This study discusses a novel approach toward homogeneous charge compression ignition operation in the 5 - 10 bar net indicated mean effective pressure range. This approach is based on the combination of boosting and variable valve actuation to maximize engine efficiency. Compression ratio plays a key role and determines low-temperature combustion feasibility in modern gasoline compression ignition concepts. In order to explore the interactions between compression ratio, boosting system and variable valve actuation, multi-cylinder engine models were utilized which employed the University of Michigan combustion model. Valve strategies featured switching from low-lift negative valve overlap to high-lift positive valve overlap, and the switching point was found to be dependent on compression ratio. A recent study by the authors suggested that heating the charge from external compression is more efficient than heating by residual gas retention strategies. Use of non-cooled intake air allows for valve events and combustion phasing that promote turbocharger performance and alleviate the backpressure problems often associated with low temperature combustion engines. Elevated intake pressure and reduced pumping work allow for improvements in efficiency with minimal NOx formation and acceptable ringing. It was found that further efficiency benefits can be realized by increasing compression ratio. Identification of trade-offs between engine hardware and combustion mode appears to be critical for homogeneous charge compression ignition operation in the 5 -10 bar net indicated mean effective pressure range. By focusing on this operating range, the present modeling study attempts to shed some light on practical applications of light-duty gasoline compression ignition concepts.