Development of an improved structural integrity assessment correlation for circumferential through-wall cracked 90° shape-distorted pipe bends subjected to in-plane opening bending moment

Abstract

A detailed and systematic assessment of the plastic collapse load of 90° shape imperfect pipe bends subjected to in-plane opening bending was conducted by implementing three-dimensional non-linear finite element analyses. The material considered in the analysis is the elastic-perfectly plastic type with a large change geometry option. Shape distortions in the pipe's cross-section and through-wall circumferential crack at the intrados region were the defects analyzed in this study. Ovality $(C_o)$ and thinning $(C_t)$ were varied from 0% to 20% with a 5% incrementation, and crack angles of 45°, 60°, and 90° were considered at the intrados. The twice-elastic slope method effectively evaluates the plastic collapse moment as mandated by the ASME B&PV code NB-3213.25, section III. The reaction moment and angular rotation curves were generated for all pipe bend models. The outcomes of the analysis revealed that the plastic collapse moment load of pipe bends was affected by through-wall circumferential crack and $C_o$ , while thinning produced negligible effect, which was subsequently excluded from the analysis. The combined effect of through-wall circumferential crack and $C_o$ produces a consequential influence on the pipe bend at 45° angle, which is severe at 60°, and even more critical at 90°. In the analysis, the plastic collapse moment for short bend radius was reduced, while that of thin-walled pipe bends increased with an increase in thickness and bend radius. The plastic collapse moment of the present analysis was validated using experimental data acquired from open literature. An enhanced structural correlation assessment was proposed for through-wall circumferential crack shape-distorted 90° pipe bends.