Optimization of A-GTAW welding parameters for naval steel (DMR 249 A) by design of experiments approach

Abstract

DMR249A steel is indigenously developed high strength low alloy (HSLA) steel. The steel is being used for construction of Indian Aircraft Carrier and other new ships under construction at various ship yards in India. In order to enhance the depth of penetration (DOP) achievable in a single pass for gas tungsten arc welding (GTAW) process, activated fluxes were developed for the steel. The process is called activated flux gas tungsten arc welding (A-GTAW). Design of experiments (DOE) approach was employed using response surface methodology (RSM) and Taguchi technique to optimize the welding parameters for achieving maximum DOP in a single pass. Design matrix was generated using DOE techniques and bead on plate experiments were carried out to generate data for influence of welding process variables on DOP. The input variables considered were current, torch speed, and arc gap. The DOP was considered as response variable. The equations correlating DOP with the process parameters were developed for both the optimization techniques. The identified optimum process parameters were validated by carrying out bead on plate experiments. The RMS error of the predicted and measured DOP values for the validation experiments of the RSM (D-optimal) and Taguchi optimization technique was found to be 0.575 and 0.860, respectively. Thus, RSM (D-optimal) was observed to predict optimized welding process parameters for achieving maximum DOP with better accuracy during A-GTAW process.

Keywords

Naval steel (DMR 249 A)activated flux gas tungsten arc welding design of experiments response surface methodology Taguchi method

Get full access to this article

View all access options for this article.

References

Malakondaiah G. Development of speciality low alloy steels. In: International conference on metals and alloys: Past, present and future, Kanpur, India, 2007, p.17.

Mallik

Minz

Mishra

. Production of DMR 249A Steel at SAIL, Bokaro Steel Plant. Mater Sci Forum 2012; 10: 149–154.

Lucas

. Activating flux improving the performance of TIG process. Weld Metal Fabric 2000; 68: 7–10.

Paskell

Lundin

Castner

. GTAW flux increases weld joint penetration. Weld J 1997; 76: 57–62.

Vasudevan M. Computational and experimental studies on arc welded austenetic stainless steels. PhD Thesis, Indian Institute of Technology, Chennai, India, 2007.

Vasudevan M, Bhaduri AK and Raj B. Developmental evaluation of activated flux for TIG welding of type 304LN and 316LN stainless steels. In: Proceedings of the International Institute of Welding, International congress, Chennai, India, 8–10 January 2008.

Gurevich SM, Zamkov VN and Kushnirenko NA. Improving the penetration of titanium alloys when they are welded by argon tungsten arc process. AvtomSvarka 1965, pp.1–4.

Huang

Shyu

Tseng

. Evaluation of TIG flux welding on the characteristics of stainless steel. Sci Tech Weld J 2005; 10: 566–573.

Leconte

Paillard

Chapelle

. Effect of oxide fluxes on activation mechanisms of tungsten inert gas process. Sci Tech Weld J 2006; 11: 389–397.

10.

Benyounis

Olabi

Hashmi

MSJ

. Multi response optimization of CO₂ laser welding process of austenitic stainless steel. Opt Laser Tech 2008; 40: 76–87.

11.

Bas

Boyaci

. Modelling and optimization - Usability of response surface methodology. J Food Eng 2007; 78: 836–845.

12.

Myers

. Response surface methodology, Ann Arbor, MI: Edwards Brothers, 1976.

13.

Myers

. Montgomery DC and Anderson-Cook CM. Response surface methodology: Process and product optimization using designed experiments, New York: Wiley, 2008.

14.

Johnson

Montgomery

. Choice of second-order response surface designs for logistic and Poisson regression models. Int J Exp Des Process Optim 2009; 1: ▪–▪.

15.

Goos

Vandebroek

. D-optimal response surface designs in the presence of random block effects. Comput Stat Data Anal 2001; 37: 433–453.

16.

Lee

C-P

Lo Huang

M-N

. D-Optimal designs for second-order response surface models with qualitative factors. J Data Sci 2011; 9: 139–153.

17.

Juang

Tarng

. Process parameters selection for optimizing the weld pool geometry in the tungsten inert gas welding of stainless steel. J Mater Process Technol 2002; 122: 33–37.

18.

Lee

Han

Son

. Optimization of Nd-YAG laser welding parameters for sealing small titanium tube ends. J Mater Sci Eng 2006; A415: 149–155.

19.

McElroy

. Experimental design hits Detroit (a primer on the Taguchi method). Autom Ind 1985; 165: 48–50.

20.

Ealey

. Taguchi methods: The thought behind the system. Autom Ind 1988; 168: 68–70.

21.

Black

Jiang

. Using Taguchi methods to determine/optimize robot process capability for path following. Robot Comput-Integr Manuf 1991; 8: 9–25.

22.

Jiang

Black

Chen

DWH

. Taguchi-based meth-odology for determining/optimizing robot process capability. HE Trans 1991; 23: 169–184.

23.

Warner

O'Connor

. Molding process is improved by using the Taguchi method. Modern Plast 1989; 66: 65–66.

24.

Liu

Nazaret

Beale

. Computer-aided design for quality (CADQ). AT&T Tech J 1990; 10: 103–115.

25.

Young

Teplik

Weed

. Application of statistical design and response surface methods to computer-aided VLSI device design: Desirability functions and Taguchi methods. IEEE Trans CAD IC Syst 1991; 10: 103–115.

26.

Cohen

. Multiple regression as a general data-analytic system. Psychol Bull 1968; 70: 426–443.

27.

Bezerra

Santelli

Oliveira

. Response surface methodology (RSM) as a tool for optimization in analytical chemistry. Talanta 2008; 76: 965–977.

28.

Gauri

Chakraborty

. Multi-response optimisation of WEDM process using principal component analysis. Int J Adv Manuf Technol 2009; 41: 741–748.