Electrical and thermal conductivity models from Mamunya et al. and Kerner’s equation for elastic and flexural modulus have been applied to experimental data to assess model accuracies. Experimental data were gained from a previous study where polyethylene and carbon black, graphite and magnetite composites produced by injection and compression moulding were tested. The electrical conductivity modelling gave accurate fits to the data, though available data were limited and the thermal conductivity modelling produced good fits with R2 values greater than 0.93. The electrical and thermal model exponents were tuned for best fit and used to compare the modelling results with the literature and gain information about conduction mechanisms such as tunnelling and links, nodes and blobs and variations in local filler concentrations. A modified Kerner’s equation to effectively allow for filler type and variations in composite processing was used to improve upon the original equation which modelled modulus behaviour based on the pure matrix. The new equation proved to be a better predictor of elastic modulus than flexural modulus.
GreenwoodPThringRHChenR. Conductive materials for polymeric bipolar plates: Electrical, thermal and mechanical properties of polyethylene-carbon black/graphite/magnetite blends. Proc IMechE, Part L: J Materials: Design and Applications2012; 227: 226–242.
2.
LuxF. Models proposed to explain the electrical conductivity of mixtures made of conductive and insulating materials. J Mater Sci1993; 28: 285–301.
3.
JingXZhaoWLanL. The effect of particle size on electric conducting percolation threshold in polymer/conducting particle composites. J Mater Sci Lett2000; 19: 377–379.
4.
MamunyaEPDavidenkoVVLebedevEV. Effect of polymer-filler interface interactions on percolation conductivity of thermoplastics filled with carbon black. Compos Interf1997; 4: 169–176.
5.
MaplestonP. Conductive composites get a growth boost from metallic fibers. Modern Plastics1992; 69: 80–83.
6.
StaufferD. Introduction to percolation theory, London: Taylor & Francis Ltd, 1985.
7.
DovzhenkoAYBuninVA. Effect of the shape and size of conducting particles on the percolation cluster formation in a ceramic composition. Tech Physics2003; 48: 1058–1060.
8.
NagataKIwabukiHNigoH. Effect of particle size of graphites on electrical conductivity of graphite/polymer composite. Compos Interf1998; 6: 483–495.
9.
WebberMEKamalMR. Estimation of the volume resistivity of electrically conductive composites. Polym Compos1997; 18: 711–725.
10.
SakaguchiRLWiltbankBDMurchisonCF. Prediction of composite elastic modulus and polymerization shrinkage by computational micromechanics. Dental Mater2004; 20: 397–401.
11.
ReussAAngewZ. Berechnung der fliessgrenze von Mishkristallen auf Grund der Plastizitatsbeding fur Einkristalle. Math Mech1929; 9: 49–58.
PalR. On the Lewis-Nielsen model for thermal/electrical conductivity of composites. Compos Part A: Appl Sci Manuf2008; 39: 718–726.
14.
ClingermanMLWebberEHKingJA. Development of an additive equation for predicting the electrical conductivity of carbon- filled composites. J Appl Polym Sci2003; 88: 2280–2299.
15.
MamunyaEPDavydenkoVVLebedevEV. Percolation conductivity of polymer composites filled with dispersed conductive filler. Polym Compos1995; 16: 318–324.
16.
MamunyaYPMuzychenkoYVPissisP. Percolation phenomena in polymers containing dispersed iron. Polym Eng Sci2002; 42: 90–100.
17.
MamunyaYPDavydenkoVVPissisP. Electrical and thermal conductivity of polymers filled with metal powders. Eur Polym J2002; 38: 1887–1897.
18.
ProgelhofRCThroneJLRuetschRR. Methods for predicting the thermal conductivity of composite systems: A review. Polym Eng Sci1976; 16: 615–625.
19.
KusyRPCorneliussenRD. The thermal conductivity of nickel and copper dispersed in poly(vinyl chloride). Polym Eng Sci1975; 15: 107–112.
KalaprasadGJosephKThomasS. Theoretical modeling of tensile properties of short sisal fiber-reinforced low-density polyethylene composites. J Mater Sci1997; 32: 4261–4267.
WuJMclachlanDS. Percolation exponents and thresholds obtained from the nearly ideal continuum percolation system graphite-boron nitride. Phys Rev B1997; 56: 1236–1248.
32.
BalbergI. Tunneling and nonuniversal conductivity in composite materials. Am Phys Soc, Phys Rev Lett1987; 59: 1305–1308.
33.
ConiglioA. Cluster structure near the percolation threshold. J Phys A1982; 15: 3829–3844.
34.
CelzardAFurdinGMarêchéJF. Anisotropic percolation in an epoxy – Graphite disc composite. Solid State Commun1994; 92: 377–383.
35.
SpeakeJHArridgeRGCCurtisGJ. Measurement of the cure of resins by ultrasonic techniques. J Phys D: Appl Phys1974; 7: 412–424.
