Numerical analysis and experimental validation of hardness and microstructural changes during laser transformation hardening of low alloy steel plates

Abstract

Laser transformation hardening is used to obtain the localized microstructural change, improve wear resistance and hardness to the desired area without affecting the bulk properties. In this study, laser transformation hardening of EN25 steel is performed using a 2 kW continuous wave solid-state neodymium yttrium aluminium garnet laser system. Numerical simulation of laser transformation hardening is carried out by finite element method considering the thermo-physical properties of the material. Based on the numerical simulation the temperature, hardness distribution, hardened depth and width and the phase proportions are determined. The simulation is performed by varying the travel speed of the workpiece. The simulation results are verified with the experimental data and are found to be satisfactory with less than 5% error. It is observed that almost 97% of the phases in the hardened zone is converted into martensite phase with increased hardness about two fold compared to the base material.

Keywords

Finite element method laser transformation hardening hardness microstructure temperature field low alloy steel

Get full access to this article

View all access options for this article.

References

Mazumder

. Laser heat treatment: the state of the art. J Metals 1983; 35(5): 18–26.

Sandven

Laser surface hardening. In: Copley

(ed.) Heat treating, vol. 4, Metal handbook , Materials Park, OH: ASM International, 1997, pp. 286–296.

Skvarenina

Shin

. Predictive modeling and experimental results for laser hardening of AISI 1536 steel with complex geometric features by a high power diode laser. Surf Coat Technol 2006; 201: 2256–2269.

ASM handbook, vol. 5, Surface engineering. Materials Park, OH: ASM International, 1994.

Grum

Sturm

. Laser surface melt-hardening of gray and nodular irons. Appl Surf Sci 1997; 109/110: 128–132.

Ready

. LIA handbook of laser materials processing , Orlando: Laser Institute of America, 2001.

ASM handbook, vol. 4, Heat treating. 9th edn. Materials park, OH: ASM International, 1998.

Mazumder

Steen

. Heat transfer model for CW laser material processing. Appl Phys 1980; 51(2): 941–947.

Wang

Chen

. Research on the temperature field in laser hardening. Opt Laser Technol 2006; 38: 8–13.

10.

Safdar

Sheikh

. An analysis of the effect of laser beam geometry on laser transformation hardening. J Manuf Sci Eng 2006; 128: 659–667.

11.

Bokota

Iskierka

. Numerical simulation of transient and residual stresses caused by laser hardening of slender elements. Comput Mater Sci 1997; 7: 366–376.

12.

Yanez

Alvarez

Lopez

. Modelling of temperature evolution on metals during laser hardening process. Appl Surf Sci 2002; 186: 611–616.

13.

Shercliff

Ashby

. The prediction of case depth in laser transformation hardening. Metal Trans A 1991; 22A: 2459–2466.

14.

Patwa

Shin

. Predictive modeling of laser hardening of AISI5150H steels. Int J Mach Tools Manuf 2007; 47: 307–320.

15.

Orazi

Fortunato

Cuccolini

. An efficient model for laser surface hardening of hypo-eutectoid steels. Appl Surf Sci 2010; 256: 1913–1919.

16.

Yilbas

Akhtar

Karatas

. Laser surface treatment of Inconel 718 alloy: thermal stress analysis. Opt Lasers Eng 2010; 48: 740–749.

17.

Ashby

Easterling

. The transformation hardening of steel surfaces by laser beams - I hypo-eutectoid steels. Acta Metall 1984; 32(11): 1935–1948.

18.

Simsir

Gur

. 3D FEM simulation of steel quenching and investigation of the effect of asymmetric geometry on residual stress distribution. J Mater Process Technol 2008; 207: 211–221.

19.

SYSWELD. Engineering guide of training and tool box. ESI group, France, 2011.

20.

Wang

Zhan

. Three-dimensional finite element analysis of temperatures and stresses in wide-band laser surface melting processing. Mater Des 2010; 31: 3366–3373.

21.

Koechner

. Solid state laser engineering, 6th edn, New York, NY: Springer Science+Business Media Inc, 2006.