Molecular-level modelling and simulations of the high-pressure volumetric response and irreversible densification of a prototypical soda-lime glass are first employed. The molecular-simulation results obtained were next used to modify the pressure versus degree-of-compression (the negative of volumetric strain) and yield strength versus pressure relations in order to account for the effects of irreversible densification. These relations are next used to upgrade the equation of state and the strength constitutive laws of an existing material model for glass. This was followed by a set of transient non-linear dynamics calculations of the transverse impact of a glass test plate with a solid right-circular cylindrical steel projectile. The results obtained show that irreversible densification can provide only a minor improvement in the ballistic resistance of glass and only in the case of high-velocity (ca. 1000 m/s) projectiles. Furthermore, it was demonstrated that if the key irreversible compaction parameters can be adjusted by modifications in glass chemistry and microstructure, significant improvements in the glass ballistic resistance can be attained over a relatively wide range of projectile velocities.
Strassburger, E., Patel, P., McCauley, W., and Templeton, D. W. Visualization of wave propagation and impact damage in a polycrystalline transparent ceramic- AlON. In Proceedings of the 22nd International Symposium on Ballistics, Vancouver, Canada, November 2005.
2.
AMPTIAC. Army materials research: transforming land combat through new technologies. AMPTIAC Qtly, 2004, 8(4), 11p.
3.
Strassburger, E., Patel, P., McCauley, J. W., Kovalchick, C., Ramesh, K. T., and Templeton, D. W. High-speed transmission shadow graphic and dynamic photoelasticity study of stress wave and impact damage propagation in transparent materials and laminates using the edge-on impact method. In Proceedings of the 23rd International Symposium on Ballistics, Spain, April 2007.
4.
Sun, D. Z., Andreiux, F., and Ockewitz, A. Modelingof the failure behavior of windscreens and component tests. In Proceedings of the 4th LS-DYNA Users' Conference, Bamberg, Germany, 23–25 May 2003.
5.
WoodcockL. V.AngellC. A.CheesemanP.Molecular dynamics studies of the vitreous state: Simple ionic systems and silica. J. Chem. Phys., 1976, 65, 1565–1577.
6.
ValleR. G. D.VenutiE.High-pressure densification of silica glass: a molecular-dynamics simulation. Phys. Rev. B, 1996, 54(6), 3809–3816.
7.
TrachenkoK.DoveM. T.Densification of silica glass under pressure. J. Phys. Condens. Matter, 2002, 14, 7449–7459.
8.
LiangY.MirandaC. R.ScandoloS.Mechanical strength and coordinate defects in compressed silica glass: Molecular dynamics simulations. Phys. Rev. B, 2007, 75024205.
9.
Nghiem, B. Fracture du verre et hétérogénéité à l'échelle submicronique. PhD Thesis, University of Paris 6, France 1998.
10.
DenoualC.HildF.Dynamic fragmentation of brittle solids: a multi-scale model. Eur. J. Mech. Solids A, 2002, 21, 105–120.
11.
YazdchiM.ValliappanS.ZhangW.A continuum model for dynamic damage evolution of anisotropic brittle materials. Int. J. Numer. Meth. Eng., 1996, 39, 1555–1583.
12.
HildF.DenoualC.ForquinP.BrajerX.On the probabilistic and deterministic transition involved in a fragmentation process of brittle materials. Comput. Struct., 2003, 81, 1241–1253.
13.
GrujicicM.PanduranganB.CoutrisN.CheesemanB. A.FountzoulasC.PatelP.StrassburgerE.A ballistic material model for Starphire®, a soda-lime transparent-armor glass. Mater. Sci. Eng. A, 2008, 491(1–2), 397–411.
14.
GrujicicM.PanduranganB.BellW. C.CoutrisN.CheesemanB. A.FountzoulasC.PatelP.An improved mechanical material model for ballistic soda-lime glass. J. Mater. Eng. Perform., 2009, 18(8), 1012–1028.
15.
GrujicicM.PanduranganB.CoutrisN.CheesemanB. A.FountzoulasC.PatelP.A simple ballistic material model for soda-lime glass. Int. J. Impact Eng., 2009, 36, 386–401.
16.
HolmquistT. J.TempletonD. W.BishnoiK. D.Constitutive modeling of aluminum nitride for large strain high-strain rate, and high-pressure applications. Int. J. Impact Eng., 2001, 25, 211–231.
17.
CamachoG. T.OrtizM.Computational modeling of impact damage in brittle materials. Int. J. Solids Struct., 1996, 33(20–22), 2899–2938.
18.
SunH.COMPASS: an ab initio force-field optimized for condensed-phase applications overview with details on alkane and benzene compounds. J. Phys. Chem. B, 1998, 102, 7338–7364.
19.
SunH.RenP.FriedJ. R.The COMPASS force field: Parameterization and validation for phosphazenes. Comput. Theor. Polym. Sci., 1998, 8(1/2), 229–246.
20.
Materials Studio 5.0, Discover theory manual, Accelrys Software Inc., 2009.
21.
Materials Studio 5.0, Visualizer manual, Accelrys Software Inc., 2009.
22.
Materials Studio 5.0, Amorphouscell manual, Accelrys Software Inc., 2009.
23.
NoseS.A unified formulation of the constant temperature molecular dynamics methods. J. Chem. Phys., 1984, 81, 511–519.
24.
JohnsonG. R.HolmquistT. J.An improved computational constitutive model for brittle materials. High pressure science and technology, 1993(AIP, New York)
25.
HolmquistT. J.TempletonD. W.BishnoiK. D.Constitutive modeling of aluminum nitride for large strain high-strain rate, and high-pressure applications. Int. J. Impact Eng., 2001, 25, 211–231.
26.
AUTODYN-2D and 3D. Version 6.1, User documentation, Century Dynamics Inc., 2006.
27.
GrujicicM.PanduranganB.ZecevicU.Ballistic performance of alumina/S-2 glass-reinforced polymer-matrix composite hybrid lightweight armor against armor piercing (AP) and non-AP projectiles. Multidiscipline Modeling Mater. Struct., 2007, 3, 287–312.
28.
GrujicicM.PanduranganB.AngstadtC. D.KoudelaK. L.CheesemanB. A.Ballistic performance optimization of a hybrid carbon nanotube/E-glass reinforced poly-vinyl-ester-epoxy matrix composite armor. J. Mater. Sci., 2007, 42, 5347–5349.
29.
GrujicicM.BellW. C.GlomskiP. S.PanduranganB.CheesemanB. A.FountzoulasC.PatelP.Multi-length scale modeling of high-pressure induced phase transformations in soda-lime glass. J. Mater. Eng. Perform., 2010DOI: 10.1007/s11665-010-9774-2.
30.
GrujicicM.PanduranganB.BellW. C.CheesemanB. A.PatelP.GazonasG. A.Molecular-level simulations of shock generation and propagation in soda-lime glass. J. Mater. Sci., 2011DOI: 10.1007/s10853-011-5691-5.
31.
BlessS.ChenT.Impact damage in layered glass. Int. J. Fract., 2010, 162(1–2), 151–158.
32.
GazonasG. A.McCauleyJ. W.BatyrevI. G.BeckerR. C.PatelP.RiceB. M.WeingartenN. S.Multiscale modeling of non-crystalline ceramics (glass). ARL Technical Report,ARL-MR-0765, Aberdeen Proving Ground, February 2011.
