Nitrogen-alloyed AISI 316L coatings with nitrogen contents, [N], between 1.2 and 80 nitrogen atoms per 100 metal atoms (N/100 Me) were obtained by reactive sputter deposition. Coatings comprising only a nitrogen supersaturated metastable face-centred cubic (fcc) phase (s-phase) were obtained for 8.6 ≤ [N] ≤ 48 N/100 Me. For [N] ≤ 5.8 N/100 Me body-centred cubic (bcc) phases were present in the coatings while at [N] ≤ 65 N/100 Me the coatings comprised unidentified high nitrogen phases in addition to s-phase. The lattice parameter of the fully s-phase coatings increased linearly with increasing [N] according to a = 0.3585 + 0.00075 [N] nm The hardness of the s-phase coatings attained a maximum value of ≈20 GPa at [N] ≈ 30-40 N/100 Me. The nitrogen in the s-phase coatings reduced the wear of the coatings by 1-2 orders of magnitude compared to the wrought material by promoting an oxidational wear mechanism.
LeveyP. R.van BennekomA. A.Mechanistic study of the effects of nitrogen on the corrosion properties of stainless steelsCorrosion, 1995, 51 (12), 911–921.
2.
MalikA. U.SiddiqiN. A.AhmadSAndijaniI. N.The effect of dominant alloy additions on the corrosion behavior of some conventional and high alloy stainless steels in seawaterCorrosion Sci., 1995, 37 (1), 1521–1535.
3.
LlewellynD. T.Nitrogen in steelsIronmaking and Steelmaking, 1993, 20 (1), 35–41.
4.
ZhangZ. L.BellT.Structure and corrosion resistance of plasma nitrided steelSurf. Engng, 1985, 1 (2), 131–136.
5.
IchiiK.FujimuraK.TakaseT.Structure of the ion-nitrided layer of 18–8 stainless steelTech. Rep., Kansai Univ., 1986, 27, 135–144.
6.
DearnleyP. A.NamvarA.HibberdG. G.A.BellT.Some observations on plasma nitriding austenitic stainless steel. In Proceedings of the First International Conference onPlasma Surface Engineering, Vol. 1, Garmische-Partenkirchen, September 1988, pp. 219–226 (DGM Informationgesellschaft, Oberusel).
7.
WilliamsonD. L.OzturkO.WeiR.WilburP. J.Metastable phase formation and enhanced diffusion in f.c.c. alloys under high dose, high flux nitrogen implantation at high and low ion energiesSurf. Coatings Technol., 1994, 65, 15–23.
8.
CollinsG. A.HutchingsR.ShortK. T.TendysJ.LiX.SamandiM.Nitriding of austenitic stainless steel by plasma immersion ion implantationSurf. Coatings Technol., 1995, 74–75 (1–3), 417–424.
LangfordJ. I.The accuracy of cell dimensions determined by Cohen's method of least squares and the systematic indexing of powder dataJ. Appl. Crystallography, 1973, 6, 190–196.
15.
OliverW. C.PharrG. M.Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJ. Mater. Res., 1992, 7 (6), 1564–1580.
16.
KeuneW.HalbauerR.GonserU.LauerJ.WilliamsonD. L.Antiferromagnetism of FCC Fe thin filmsJ. Appl. Physics, 1977, 48 (7), 2976–2979.
17.
WrightJ. G.Ferromagnetism in epitaxial f.c.c. iron filmsThe Phil. Mag., 1971, 24, 217–223.
18.
ParvinK.WeathersbyS. P.BarbeeT. W.JrWeihsT. P.WallM. A.Magnetic properties and structural transformations in copper-304 stainless steel multilayer materials. In Materials Research Society Symposium Proceedings, Vol. 382, 1995, pp. 191–195.
19.
GodboleM. J.PedrazaA. J.ParkJ. W.GeeseyG.The crystal structure of stainless steel films deposited on austenitic stainless steel substratesScr. Metal. Materialia, 1993, 28, 1201–1206.
20.
AngelT. Formation of martensite in austenitic stainless steels.J. Iron and Steel Inst., 1954, 177, 165–174.
21.
MalavasiS.OueldennaouaA.FoosM.FrantzC.Metastable amorphous and crystalline (α,σ) phase in physical vapor deposited Fe-(Cr)-Ni-(C) depositsJ. Vacuum Sci. Technol. A, 1987, 5 (4), 1888–1891.
22.
OkitaT.NaoeM.Microstructure of stainless steel films utilizable for magnetic recordingMater. Sci. Engng, 1991, A134, 1301–1304.
23.
BourjotA.FoosM.FrantzC. Chemical and structural characterization of M100-xNx thin films prepared by magnetron reactive sputtering (M = AISI 310 stainless steel, molybdenum). In Proceedings of the First International Conference on Plasma Surface Engineering, Vol. 1, Garmisch-Partenkirchen, September 1988, pp. 777–785 (DGM Informationgesellschaft, Oberusel).
SakerA.LeroyCh.MichelH.FrantzC.Properties of sputtered stainless steel-nitrogen coatings and structural analogy with low temperature plasma nitrided layers of austenitic steelsMater. Sci. Engng, 1991, A140, 702–708.
26.
DarbeïdaA.SakerA.BillardA.von StebutJ.Optimization of the surface mechanical strength of AISI 316L physically vapour deposited nitrogen-doped coatings on AISI 316L substratesSurf. Coatings Technol., 1993, 60, 434—440.
27.
SheddenB. A.KaulF. N.SamandiM.WindowB.The role of energetic neutrals in reactive magnetron sputtering of nitrogen-doped stainless steel coatingsSurf. Coatings Technol., 1997, 97 (1–3 pt 1), 102–108.
28.
DahlgrenS. D.Equilibrium phases in 304L stainless steel obtained by sputter depositionMetall. Trans., 1970, 1, 3095–3099.
29.
LiuD.WangF.CaoCh.LouH.ZhangL.LinH.The pitting corrosion resistance of microcrystalline coatings of sputtered 321 stainless steelCorrosion, 1990, 46 (12), 975–977.
30.
ASM Handbook, Vol. 1: Properties and Selection: Irons, Steels, and High-Performance Alloys, 10th edition, 1990 (ASM International, Materials Park, Ohio).
31.
MentheE.RieK. T.SchultzeJ. W.SimsonS.Structure and properties of plasma-nitrided stainless steelSurf. Coatings Technol., 1995, 74–75, 412–416.
32.
MarchevK.CooperC. V.BlucherJ. T.GiessenB. C.Conditions for the formation of a martensitic single-phase compound layer in ion-nitrided 316L austenitic stainless steelSurf. Coatings Technol., 1998, 99, 225–228.
33.
MarchevK.HidalgoR.LandisM.VallerioR.CooperC. V.GiessenB. C.Metastable m phase layer on ion-nitrided austenitic stainless steels. Part 2: Crystal structure and observation of its two-directional orientational anisotropySurf. Coatings Technol., 1999, 112 (1), 67–70.
34.
JackK. H.Nitriding In Heat Treatment ‘73, 1995, pp. 39–50 (The Metals Society, London).
35.
MarcusP.BussellM. E.XPS study of the passive films formed on nitrogen-implanted austenitic stainless steelsAppl. Surf. Sci., 1992, 59, 7–21.
36.
SingerI. L.MurdayJ. S.Chemical state of ion-implanted nitrogen in Fe18Cr8Ni steelJ. Vacuum Sci. Technol., 1980, 17 (1), 327–329.
37.
DahmK. L.Novel coatings for corrosive wear applications. PhD thesis, University of Auckland, New Zealand, 1998.
38.
GrujicicM.ZhouX. W.OwenW. S.Monte Carlo analysis of short-range order in nitrogen-strengthened Fe-Ni-Cr-N austenitic alloysMater. Sci. Engng, 1993, A169, 103–110.
39.
OdaK.KondoN.ShibataK.X-ray fine structure analysis of interstitial (C, N)-substitutional (Cr) complexes in austenitic stainless steelsISIJ Int., 1990, 30 (8), 625–631.
40.
NumakuraH.MiuraM.MatsumotoH.KoiwaM.Nitrogen trapping to chromium in an iron studied by internal friction and magnetic after-effect techniquesISIJ Int., 1996, 36, (3), 290–299.
41.
von StebutJ.DarbiedaA.SakerA.BillardA.RezakhanlouR.Optimization of the contact mechanical strength of magnetron-sputtered nitrogen-doped AISI 316L physically vapour deposited coatingsSurf. Coatings Technol., 1993, 57, 31–42.
NakaM.MatumotoY.Corrosion resistance and surface structure of sputtered FeNiCrMoZr amorphous alloysMater. Sci. Engng, 1991, A134, 1045–1048.
44.
DahlgrenS. D.MerzM. D.Solid solutions in sputter-deposits of iron with 0 to 5 Wt Pct CMetall. Trans., 1971, 2, 1753–1760.
45.
ChopraK. L.Thin Film Phenomena, 1969 (McGraw-Hill, New York).
46.
GavriljukV. G.Nitrogen in iron and steelISIJ Int., 1996, 36 (7), 738–745.
47.
SimmonsJ. W.CovinoB. S.HawkJ. A.JrDunningJ. S.Effect of nitride (Cr2N) precipitation on the mechanical, corrosion, and wear properties of austenitic stainless steelISIJ Int., 1996, 36 (7), 846–854.
48.
SamandiM.SheddenB. A.SmithD. I.CollinsG. A.HutchingsR.TendysJ.Microstructure, corrosion and tribological behaviour of plasma immersion ion-implanted austenitic stainless steelSurf. Coatings Technol., 1993, 59, 261–266.
49.
SunY.BellT.Sliding wear characteristics of low temperature plasma nitrided 316 austenitic stainless steelWear, 1998, 218 (1), 34–42.
50.
WeiR.ShogrinB.WilburP. J.OzturkO.WilliamsonD. L.IvanovI.MetinE.The effects of low-energy-nitrogen-ion implantation on the tribological and microstructural characteristics of AISI 304 stainless steelJ. Tribology, 1994, 116, 260–267.
51.
MasuyamaF.HiromatsuK.HasegawaY.High temperature oxidation behaviour of high nitrogen ferritic steelsISIJ Int., 1996, 36 (7), 825–833.
52.
SuzukiS.KosakaT.InoueH.WasedaY.Angle resolved XPS study of thin oxide layers formed on the surface of iron-chromium binary alloys exposed to airISIJ Int., 1996, 36 (4), 433–437.
53.
GrabkeH. J.DennertR.WagemannB.The effect of S, N, and C on the oxidation of Ni-20%Cr and Fe-20%CrOxidation of Metals, 1997, 47 (5/6), 495–506.
54.
QuinnT. F. J.Physical Analysis for Tribology, 1991, pp. 399–431 (Cambridge University Press, Cambridge).
