To apply the thermal comfort to the optimization of building layout, a variable design method based on Kmeans clustering is proposed. The evaluation was based on numerical simulation, genetic algorithm and universal thermal climate index (UTCI) to implement the building layout optimization on Matlab. Finally, the building layouts with centralized type, decentralized type and edge flow type water configuration were optimized, respectively. The results show that after the optimization, a reduction of 0.1∼0.6°C of UTCI was observed. We concluded that under moderate heat stress, the increase in wind velocity is the key to thermal comfort improvement.
XuCMaXYuCWF. Photovoltaic double-skin façade: a combination of active and passive utilizations of solar energy. Indoor Built Environ2019; 28(8): 1013–1017.
2.
LiXShenCYuC. Building energy efficiency: passive technology or active technology?Indoor Built Environ2017; 26(6): 729–732.
3.
WatsonKJ. Understanding the role of building management in the low-energy performance of passive sustainable design: Practices of natural ventilation in a UK office building. Indoor Built Environ2015; 24(7): 999–1009.
4.
BaiGGongGYuCWFZhenO. A combined large multi-facet bulbous façade glazed curtain with open Atrium as a natural ventilation solution for an energy efficient sustainable office building in Southern China. Indoor Built Environ2015; 24(6): 813–832.
5.
MichalekJChoudharyRPapalambrosP. Building layout design optimization. Eng Optimization2002; 34(5): 461–484.
6.
PanãoMJNOGonçalvesHJPFerrãoPMC. Optimization of the urban building efficiency potential for mid-latitude climates using a genetic algorithm approach. Renew Energ2008; 33(5): 887–896.
7.
KämpfJ HMontavonMBunyescJBolligerRRobinsonD. Optimisation of buildings’ solar irradiation availability. Solar Energy2010; 84(4): 596–603.
8.
ZhangLZhangLWangY. Shape optimization of free-form buildings based on solar radiation gain and space efficiency using a multi-objective genetic algorithm in the severe cold zones of China. Solar Energy2016; 132: 38–50.
9.
YiYKKimH. Agent-based geometry optimization with Genetic Algorithm (GA) for tall apartment’s solar right. Solar Energy2015; 113: 236–250.
10.
SeongYBKimYYSeokHTChoiJMYeoMSKimKW. Automatic computation for optimum height planning of apartment buildings to improve solar access. Solar Energy2011; 85(1): 154–173.
11.
WangLTanZJiG. Investigation of application-oriented technique of wind-environment related performance optimization design. Eco-city Green Building2017; 1: 100–104.
12.
Hachem-VermetteCSinghaKMendes SilvaJ. Combining cluster analysis and GIS maps to characterise building stock: Case study in the historical city centre of Viseu, Portugal. J Building Eng2022; 58: 104949.
13.
VignaILolliniRPernetticR. Assessing the energy flexibility of building clusters under different forcing factors. J Building Eng2021; 44: 102888.
14.
EggimannSVulicNMRüdisüliMutschlerROrehounigKSulzerM. Spatiotemporal upscaling errors of building stock clustering for energy demand simulation. Energ Build2022; 258: 111844.
15.
CamporealePEMoyanoPM. A GIS-based methodology to increase energy flexibility in building cluster through deep renovation: a neighborhood in Seville. Energy and Buildings2021; 231: 110573.
16.
HuangPLovatiMZhangXBalesC. A coordinated control to improve performance for a building cluster with energy storage, electric vehicles, and energy sharing considered. Appl Energ2021; 268: 114983.
17.
GaoDCSunY. A GA-based coordinated demand response control for building group level peak demand limiting with benefits to grid power balance. Energy & Buildings2016; 110: 31–40.
18.
HuangSZuoWSohnMD. Amelioration of the cooling load based chiller sequencing control. Appl Energ2016; 168: 204–215.
19.
LiKZhangJChenXXueW. Building's hourly electrical load prediction based on data clustering and ensemble learning strategy. Energy and Buildings2022; 261: 111943.
20.
DengXTanZTanMChenW. A clustering-based climatic zoning method for office buildings in China. J Building Eng2021; 42(6): 102778.
21.
DengQAWangGAWangYAZhouHBMaLB. A quantitative analysis of the impact of residential cluster layout on building heating energy consumption in cold IIB regions of China. Energy and Build2021; 253: 111515.
22.
TianZZhangXJinXZhouXSiBHShiX. Towards adoption of building energy simulation and optimization for passive building design: a survey and a review. Energ Build2018; 158: 1306–1316.
23.
WenYLengJYuFYuC. Integrated design for underground space environment control of subway stations with atriums using piston ventilation. Indoor Built Environ2020; 29(9): 1300–1315.
24.
ChenTFengZCaoS. The effect of vent inlet aspect ratio and its location on ventilation efficiency. Indoor Built Environ2019; 29(2): 180–195.
25.
ChenTCaoS. Numerical study on the integrated effects of supplied air velocity and exhaust velocity on particles removal for industrial buildings. Energ Built Environ2021; 2(4): 380–391.
26.
ShiXTianZChenWSiBHJinX. A review on building energy efficient design optimization from the perspective of architects. Renew Sustain Energ Rev2016; 65: 872–884.
27.
MachairasVTsangrassoulisAAxarliK. Algorithms for optimization of building design: a review. Renew Sustain Energ Rev2014; 31(2): 101–112.
28.
Tuhus-DubrowDKrartiM. Genetic-algorithm based approach to optimize building envelope design for residential buildings. Building Environ2010; 45(7): 1574–1581.
29.
HöppeP. The physiological equivalent temperature–a universal index for the biometeorological assessment of the thermal environment. Int Journal Biometeorology1999; 43(2): 71–75.
30.
BlazejczykKEpsteinYJendritzkyGStaigerHTinzB. Comparison of UTCI to selected thermal indices. Int J Biometeorology2012; 56(3): 515–535.
31.
ZhangR. Research on impact of water configuration for urban residential microclimate in Harbin. Harbin: Harbin Institute of Technology, 2015.
32.
WrightJAlajmiA. The robustness of genetic algorithms in solving unconstrained building optimisation problems. In: Building Simulation 2005, Proceedings of the Ninth International IBPSA Conference, Montreal Canada, 15–18 August 2005, pp. 1361–1368.
33.
LiYChenL. A study on the database of modular façade retrofitting building envelope. Energy and Buildings2020; 214: 109826.
34.
FrankeJHellstenASchlünzenHCarissimoB. Best practice guideline for the CFD simulation of flows in the urban environment. COST Action 732: Quality Assurance and Improvement of Microscale Meteorological Models. Brussels: EU COST Office, 2007.
35.
TominagaYMochidaAYoshieRKataokaHNozuTYoshikawaMShirasawaT. AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings. J Wind Eng Ind Aerodyn2008; 96: 1749–1761.
36.
LiYChenL. Study on the influence of voids on high-rise building on the wind environment. Building Simulation2020; 13(2): 419–438.
