A new Dynamic zOnal Model with Air-diffuser (DOMA) was developed. Several case studies were investigated and tested to evaluate and validate this program using measurement data. This new model was integrated into a TRaNsient SYstems Simulation program library and coupled with the multi-zone thermal model. The DOMA/TRNSYS coupled model was then used to predict room temperature distribution over an entire day of a single-zone building. The results show that increasing the heating outputs of the electric floor system, for example, from 75 to 200 W/m2, would not effectively improve the indoor thermal comfort, since the thermostat will reach the set point first and then turn off the system before the room gets enough heat and reach a comfortable level. This indicates the importance of selecting an appropriate location and set point for the thermostat when using a floor heating system. This potential thermal comfort issue can only be identified through the two-node model with a dynamic zonal model rather than the conventional PMV model, which thus suggests that for optimizing indoor thermal comfort of a building equipped with a time-sensitive control strategy and/or HVAC system, the TSENS results obtained from the two-node model integrated with DOMA are more appropriate than PMVs.
MegriAC. Building Energy and Environment: Application to Thermal Zonal and Support Vector Machine Predictive Models. HDR Thesis, Paris VI, Université Pierre et Marie Curie, 2011.
2.
YuY. Contribution to the Development of a New Integrated Zonal Modeling Approach in Building environment. Doctoral Dissertation, North Carolina Agricultural and Technical State University, Greensboro, 2014.
3.
YuYMegriACJiangS. A review of the development of airflow models used in building load calculation and energy simulation. Building Simulation2019; 12(3): 347–363).
4.
MegriACHaghighatF. Zonal modeling for simulating indoor environment of buildings: review, recent developments, and applications. HVAC&R Res2007; 13(6): 887–905.
5.
NorrefeldtVGrünGSedlbauerK. VEPZO: velocity propagating zonal model for the estimation of the airflow pattern and temperature distribution in a confined space. Building Environ2012; 48, pp.183–194.
YuYMegriC. A Novel Method for Thermostat Set Point Prediction for Energy Savings and/or Better Human Thermal Comfort - A Zonal Modelling Approach. Int J Ventilation2014; 13(3): 299–318.
8.
MegriACYuY. Study of residential underfloor air distribution (UFAD) systems using a new modelling approach. Indoor Built Environ2017; 26(1): 5–20.
9.
HowarthAT. The prediction of air temperature variations in naturally ventilated rooms with convective heating. Building Serv Eng Res Technol1985; 6(4): 169–175.
10.
YuY. Energy prediction of electric floor radiation systems using a new integrated modeling approach. ASHRAE Trans2014; 120:356.
11.
LebrunJNgendakumanaP. Air circulation induced by heating emitters and corresponding heat exchanges along the walls: Test-room results and modelling. In Proceedings of ROOMVENT1987, Stockholm; SCANVAC Vol. 87, 10–12
12.
InardCMolleN. Le chauffage par corps de chauffe: efficacité en confort et en consommation. Revue générale de thermique1989; 28(335–336): 650–656.
13.
InardCButyD. Simulation of thermal coupling between a radiator and a room with zonal models. In Proceeding of 12th AIVC Conference, Ottawa, 24-27 September 1991; Vol. 2, pp. 125–131.
14.
BouniaH. Modelisation simplifiee d'ecoulements de convection mixte internes; application aux echanges thermo-aerauliques dans les locaux. These de Doctorat, Universite de Poitiers, Poitiers, 1993.
15.
InardCBouiaHDalicieuxP. Prediction of air temperature distribution in buildings with a zonal model. Energy and Buildings1996; 24(2): 125–132.
16.
HaghighatFLiYMegriAC. Development and validation of a zonal model: POMA. Building Environment2001; 36(9): 1039–1047.
17.
TeshomeEJHaghighatF. Zonal models for indoor air flow: a critical Review. Int J Ventil2004; 3(2): 119–129.
18.
BoukhrisYGharbiLGhrab-MorcosN. Modeling coupled heat transfer and air flow in a partitioned building with a zonal model: application to the winter thermal comfort. Build Simulat2009; 2(1): 67–74.
19.
YuYMegriAC. A novel pressurized zonal model using the momentum equation. Am J Eng Appl Sci2014; 7(1): 77–87.
20.
MegriACYuY. New calibrated zonal model (POMA+) for temperature and airflow predictions. Building Environ2015; 94: 109–121.
21.
LuYXiangYChenGLiuJWangY. On-site measurement and zonal simulation on winter indoor environment and air infiltration in an atrium in a severe cold region. Energ Build2020; 223: 110160.
22.
MegriACSnyderMMusyM. Building zonal thermal and airflow modelling: a review. Int Journal Ventilation2005; 4(2): 177–188.
23.
LuYDongJLiuJ. Zonal modelling for thermal and energy performance of large space buildings: A review. Renew Sustain Energ Rev,2020; 133:110241.
24.
FangerPO. Thermal Comfort. Malabar, Fla, 1982.
25.
ParsonsKC. The effects of gender, acclimation state, the opportunity to adjust clothing and physical disability on requirements for thermal comfort. Energ Build2002; 34(6): 593–599.
26.
ASHRAE 2017. ASHRAE Handbook of Fundamentals. Atlanta: American Society of Heating, 2017.
27.
GaggeAPFobeletsAPBerglundLG. A standard predictive index of human response to the thermal environment. ASHRAE Trans1986; 92(1): 709–731.
28.
StolwijkJAHardyJD. Partitional calorimetric studies of responses of man to thermal transients. J Appl Physiol1966; 21(3): 967–977.
29.
DuffyMJHillerMBradleyDEKeilholzWThorntonJW. TRNSYS-features and functionalitity for building simulation 2009 conference. In: 11th International IBPSA Conference-Building Simulation,Glasgow, 27-30 July 2009.
30.
HeiselbergPK. Ventilation of Large Spaces in Buildings: Analysis and Prediction Techniques. Aalborg University, Indoor Environmental Engineering, Aalborg, 1998.
31.
RiedererPMarchioDVisierJCHusaunndeeALahrechR. Room thermal modelling adapted to the test of HVAC control systems. Building Environ2002; 37(8–9): 777–790.
32.
SeemJE. Modeling of Heat Transfer in buildings. Doctoral Dissertation, The University of Wisconsin-Madison, Madison, 1987.
33.
TRNSYS Manual 2005. Components Mathematical reference. TRNSYS Coordinator, Thermal Energy System Specialists, LLC, Madison, USA, 2005.
34.
KoschenzMLehmannB. Design of a Thermal Model for Thermo-Active Construction Element Systems (TABS). EMPA, Abteilung Energiesysteme/Haustechnik, Dübendorf, Switzerland, Stefan Holst, TRANSSOLAR, Energietechnik GmbH, Stuttgart, Germany, 2000.
35.
FangerPO. Calculation of thermal comfort-introduction of a basic comfort equation. ASHRAE Transacions1967; 73,.
36.
ShawEW. Thermal Comfort: analysis and applications in environmental engineering, by P. O. Fanger. 244 pp. DANISH TECHNICAL PRESS. Copenhagen, Denmark, 1970. Danish Kr. 76, 50. R Soc Health J1972; 92(3): 164.
37.
GaggeAPBurtonACBazettHC. A practical system of units for the description of the heat exchange of man with his environment. Science1941; 94(2445): 428–430.
38.
MinTCSchutrumLFParmeleeGVVourisJD. Natural convection and radiation in a panel heated room. ASHRAE Trans1956; 62(1): 337–358.
39.
AthienitisAKChenY. Comparison of control strategies for floor heating. ASHRAE Trans2002; 108:1005.
40.
ZhaiZChenQ. Numerical determination and treatment of convective heat transfer coefficient in the coupled building energy and CFD simulation. Building Environ2004; 39(8): 1001–1009.
