Evaluation of Sub-Zonal Airflow Models for the Prediction of Local Interior Boundary Conditions

Abstract

Currently, researchers are striving to advance the possibilities to calculate the integrated phenomena of heat, air and moisture flows in buildings, with specific focus on the interactions between the building zones and building components. This paper presents an investigation of the capability and applicability of the sub-zonal airflow model to predict the local indoor environmental conditions, as well as the local surface transfer coefficients near building components. Two test cases were analyzed for, respectively, natural and forced convection in a room. The simulation results predicted from the sub-zonal airflow models are compared to experimental data and numerical computational fluid dynamics (CFD) results. The study shows that sub-zonal models combined with an appropriate surface transfer coefficient model are able to give reliable predictions of the local indoor environmental conditions and surface transfer coefficients near the building component for the analyzed cases. The relatively short computation time and flexibility of the sub-zonal model makes the application attractive for transient simulation of heat, air and moisture transport in buildings. However, the availability of appropriate reference conditions, for example experimental or numerical results, is a prerequisite for the development of a reliable sub-zonal model.

Keywords

Boundary conditions Sub-zonal airflow model

Get full access to this article

View all access options for this article.

References

Woloszyn

Rode

: Tools for performance simulation of heat, air and moisture conditions of whole buildings: Build Simulat 2008;1(1):5–24.

Janssen

Blocken

Carmeliet

: Conservative modelling of the moisture and heat transfer in building components under atmospheric excitation: Int J Heat Mass Transfer 2007;50(5–6):1128–1140.

Steskens

PWMH

Janssen

Rode

: Influence of the convective surface transfer coefficients on the heat, air, and moisture (HAM): Building Perform 2009;18(3):245–256.

Roels

Janssen

: A comparison of the Nord test and Japanese test methods for the moisture buffering performance of building materials: J Build Phys 2006;30(2):137–161.

Abuku

Janssen

Roels

: Impact of wind-driven rain on historic brick wall buildings in a moderately cold and humid climate: numerical analyses of mould growth risk, indoor climate and energy consumption: Energy Build 2009;41(1):101–110.

10.

11.

Teshome

Haghighat

: Zonal models for indoor air flow – a critical review: Int J Vent 2004;3(2): 119.

12.

Megri

: Zonal modeling for simulating indoor environment of buildings: review, recent developments, and applications: HVAC Res 2007;13(6):887.

13.

Wurtz

Mora

Inard

: An equation-based simulation environment to investigate fast building simulation: Build Environ 2006;41(11):1571–1583.

14.

Inard

Bouia

Dalicieux

: Prediction of air temperature distribution in buildings with a zonal model: Energy Build 1996;24(2):125–132.

15.

Nielsen

: Specification of a Two-Dimensional Test Case. Aalborg, University of Aalborg, 1990.

16.

17.

Allard

Brau

Inard

Pallier

: Thermal experiments of full–scale dwelling cells in artificial climatic conditions: Energy Build 1987;10(1):49–58.

18.

Nielsen

Restivo

Whitelaw

: Velocity characteristics of ventilated rooms: J Fluids Eng Trans ASME 1978;100(3):291–298.

19.

Nicolai

Grunewald

: CHAMPS-BES Program for Coupled Heat, Air, Moisture and Pollutant Simulations in Building Envelope Systems (User Manual). Syracuse, NY, BEESL – Building Energy and Environmental Systems Laboratory, Department of Mechanical and Aerospace Engineering, Syracuse University, 2006.

20.

Siegel

Howell

: Thermal Radiation Heat Transfer. Washington DC, Hemisphere Publishing Corporation, 1992.

21.

Stewart

Ren

: COwZ-A sub-zonal indoor airflow, temperature and contaminant dispersion model: Build Environ 2006;41(12):1631–1648.

22.

Rajaratnam

: Turbulent Jets. Amsterdam, Oxford and New York, Elsevier Scientific Publishing Company, 1976.

23.

24.

25.

26.

27.

Cengel

: Heat Transfer: A Practical Approach. New York, McGraw-Hill, 2003.

28.

Chilton

Colburn

: Mass transfer (absorption) coefficients: Ind Eng Chem 1934;26:1183–1187.

29.

Turner

Flake

: The experimental measurement of natural convection heat transfer in rectangular enclosures: ASME Trans J Heat Transfer 1980;102:236–241.

30.

Bohn

Kirkpatrik

Olson

: Experimental study of three-dimensional natural convection and high Rayleigh numbers: ASME Trans J Heat Transfer 1984;106:339–384.

31.

Khalifa

: Natural convective heat transfer coefficient - a review : II. Surfaces in two- and three-dimensional enclosures: Energ Conver Manag 2001;42(4):505–517.

32.

Axley

: Surface drag flow relations for zonal modelling: Build Environ 2001;36(7):843–850.

33.

Mora

Gadgil

Wurtz

: Comparing zonal and CFD model predictions of isothermal indoor airflows to experimental data: Indoor Air 2003;13:77–85.

Evaluation of Sub-Zonal Airflow Models for the Prediction of Local Interior Boundary Conditions – Natural and Forced Convection Cases

Abstract

Keywords

Get full access to this article

References