Global attention is currently focussed on developing techniques to improve the thermal performance of buildings to provide indoor comfort with minimum reliance on energy load. Several studies have investigated building facade, materials used and other factors involved in building design. The aim of this study is to examine the impact of thermal insulation, shading devices, window-to-wall ratio (WWR) and a combination of these factors in a prototype school building design in the warm climate city of Taif, Saudi Arabia. The study used various methods classified into two main phases. The first phase involved on-site observation where both thermal imaging and regular cameras were used to examine the influence of orientation on glazing as a baseline. The second phase involved advanced software investigations with 2D AutoCAD, 3D Revit and computer modelling for energy evaluation and daylight factor. A detailed framework was introduced to examine current school buildings and to improve the future designs of prototype school buildings. The study revealed that a combination of applying thermal insulation along with minimising WWR is required in existing buildings within hot and dry regions. Furthermore, it was recommended that WWR should not exceed 35%, 25% and 20% for northwest, southeast and southwest building facades, respectively.
Prince Mohammed bin Salman. Our vision: Saudi Arabia. The heart of the Arab and Islamic worlds, the investment powerhouse, and the hub connecting three continents. Saudi vision, http://vision2030.gov.sa/en/foreword (2016, accessed 5 March 2018).
2.
Alwetaishi M and Balabel A. Numerical study of micro-climatically responsive school building design in Saudi Arabia. J King Saud Univ – Eng Sci 2017; DOI:10.1016/j.jksues.2017.03.005.
3.
Alwetaishi MSS Human Thermal Comfort and Building Performance of Schools in Hot and Humid Climate with a Particular Reference to Saudi Arabia, Jeddah; [PhD Thesis]; Nottingham University. Nottingham; 2015.
4.
FreireRZMazuroskiWAbadieMOMendesN.Capacitive effect on the heat transfer through building glazing systems. Appl Energy2011;
88: 4310–4319.
5.
LolliniRBarozziBFasanoGMeroniIZinziM.Optimisation of opaque components of the building envelope. Energy, economic and environmental issues. Build Environ2006;
41: 1001–1013.
6.
KolaitisDIMalliotakisEKontogeorgosDAMandilarasIKatsourinisDIFountiMA.Comparative assessment of internal and external thermal insulation systems for energy efficient retrofitting of residential buildings. Energy Build2013;
64: 123–131.
7.
BiniciHEkenMDolazMAksoganOKaraM.An environmentally friendly thermal insulation material from sunflower stalk, textile waste and stubble fibres. Constr Build Mater2014;
51: 24–33.
8.
YuJYangCTianLLiaoD.A study on optimum insulation thicknesses of external walls in hot summer and cold winter zone of China. Appl Energy2009;
86: 2520–2529.
9.
DimoudiAKostarelaP.Energy monitoring and conservation potential in school buildings in the C′ climatic zone of Greece. Renew Energy2009;
34: 289–296.
10.
ÇomakliKYükselB.Environmental impact of thermal insulation thickness in buildings. Appl Therm Eng2004;
24: 933–940.
11.
MahliaTMIIqbalA.Cost benefits analysis and emission reductions of optimum thickness and air gaps for selected insulation materials for building walls in Maldives. Energy2010;
35: 2242–2250.
12.
KaynakliO.A review of the economical and optimum thermal insulation thickness for building applications. Renew Sustain Energy Rev2012;
16: 415–425.
13.
BojicMYikFSatP.Influence of thermal insulation position in building envelope on the space cooling of high-rise residential buildings in Hong Kong. Energy Build2001;
33: 569–581.
14.
OzelM.Determination of optimum insulation thickness based on cooling transmission load for building walls in a hot climate. Energy Convers Manag2013;
66: 106–114.
15.
El-din MMS.
On the heat flow into the ground. Renew Energy1999;
18: 473–490.
16.
SalehM.Impact of thermal insulation location on buildings in hot dry climates. Sol Wind Technol1990;
7: 393–406.
17.
ZhangLLuoTMengXWangYHouCLongE.Effect of the thermal insulation layer location on wall dynamic thermal response rate under the air-conditioning intermittent operation. Case Stud Therm Eng2017;
10: 79–85.
18.
HouCMengXGaoYMaoWLongE.Effect of the insulation materials filling on the thermal performance of sintered hollow bricks under the air-conditioning intermittent operation. Case Stud Constr Mater2018;
8: 217–225.
19.
AlwetaishiM.Impact of glazing to wall ratio in various climatic regions: a case study. J King Saud Univ Eng Sci2019;
31: 6–18.
20.
AlghoulSKRijaboHGMashenaME.Energy consumption in buildings: a correlation for the influence of window to wall ratio and window orientation in Tripoli, Libya. J Build Eng2017;
11: 82–86.
21.
SuXZhangX.Environmental performance optimization of window-wall ratio for different window type in hot summer and cold winter zone in China based on life cycle assessment. Energy Build2010;
42: 198–202.
22.
MarinoCNucaraAPietrafesaM.Does window-to-wall ratio have a significant effect on the energy consumption of buildings? A parametric analysis in Italian climate conditions. J Build Eng2017;
13: 169–183.
23.
FengGChiDXuXDouBSunYFuY.Study on the influence of window-wall ratio on the energy consumption of nearly zero energy buildings. Procedia Eng2017;
205: 730–737.
24.
AlwetaishiM.Impact of glazing to wall ratio in various climatic regions: a case study. J King Saud Univ Eng Sci2019;
31: 6–18.
25.
PriyadarsiniRHienWNWai DavidCK.Microclimatic modeling of the urban thermal environment of Singapore to mitigate urban heat island. Sol Energy2008;
82: 727–745.
26.
BergerTAmannCFormayerH, et al.
Impacts of external insulation and reduced internal heat loads upon energy demand of offices in the context of climate change in Vienna, Austria. J Build Eng2016;
5: 86–95.
27.
ResuliPDervishiS.Thermal performance of cultural heritage Italian housing in Albania. Energy Procedia2015;
78: 753–758.
28.
CarliniMZilliDAllegriniE.Simulating building thermal behaviour: the case study of the School of the State Forestry Corp. Energy Procedia2015;
81: 55–63.
29.
PinoABustamanteWEscobarRPinoFE.Thermal and lighting behavior of office buildings in Santiago of Chile. Energy Build2012;
47: 441–449.
30.
DudkiewiczEFidorow-KaprawyN.The energy analysis of a hybrid hot tap water preparation system based on renewable and waste sources. Energy2017;
127: 198–208.
31.
KendrickCOgdenRWangXBaicheB.Thermal mass in new build UK housing: A comparison of structural systems in a future weather scenario. Energy Build2012;
48: 40–49.
32.
ZorasSVeranoudisSDimoudiA.Micro-climate adaptation of whole building energy simulation in large complexes. Energy Build2017;
150: 81–89.
33.
GucyeterB.Evaluating diverse patterns of occupant behavior regarding control-based activities in energy performance simulation. Front Archit Res2018;
7: 167–179.
AlwetaishiMGadiMIssaUH.Reliance of building energy in various climatic regions using multi criteria. Int J Sustain Built Environ2017;
6: 555–564.
36.
SalehPH.Thermal performance of glazed balconies within heavy weight/thermal mass buildings in Beirut, Lebanon’s hot climate. Energy Build2015;
108: 291–303.
37.
Al-SaneaSAZedanMF.Improving thermal performance of building walls by optimizing insulation layer distribution and thickness for same thermal mass. Appl Energy2011;
88: 3113–3124.
38.
Al-TurkiAZakiGM.Cooling load response for building walls comprising heat storing and thermal insulating layers. Energy Convers Manag1991;
32: 235–247.
39.
MengXHuangYCaoY, et al.
Optimization of the wall thermal insulation characteristics based on the intermittent heating operation. Case Stud Constr Mater2018;
9: e00188.
40.
KosseckaEKosnyJ.Influence of insulation configuration on heating and cooling loads in a continuously used building. Energy Build2002;
34: 321–331.
41.
AlwetaishiMS.Impact of building function on thermal comfort: a review paper. Am J Eng Appl Sci2016;
9: 928–945.
42.
CIBSE.Natural ventilation in non-domestic building.
London:
The Chartered Institution of Building Services Engineers (CIBSE), 1997.
