GuoZ. A framework for modeling non-steady state concentrations of semivolatile organic compounds indoors ― II. Interactions with particulate matter. Indoor Built Environ2014; 23: 26–43.
3.
XuYLiuZParkJClausenPABenningJLLittleJC. Measuring and predicting the emission rate of phthalate plasticizer from vinyl flooring in a specially-designed chamber. Environ Sci Technol2012; 46: 12534–12541.
4.
LiuCLiuZLittleCLZhangY. Convenient, rapid and accurate measurement of SVOC emission characteristics in experimental chambers. PLOS One2013; 8(8): e71445–e71445.
5.
LiuZYeWLittleJC. Predicting emissions of volatile and semivolatile organic compounds from building materials: a review. Build Environ2013; 64: 7–25.
6.
GuoZ. A framework for modeling non-steady state concentrations of semivolatile organic compounds indoors ― I. Emissions from diffusional sources and sorption by interior surfaces. Indoor Built Environ2013; 22: 685–700.
7.
TichenorBAGuoZDunnJESparksLEMasonMA. The interaction of vapor phase organic compounds with indoor sinks. Indoor Air1999; 1: 23–35.
8.
XuYLittleJC. Predicting emissions of SVOCs from polymeric materials and their interaction with airborne particles. Environ Sci Technol2006; 40: 456–461.
9.
Van LoyMDLeeVCGundelLADaiseyJMSextroRGNazaroffWW. Dynamic behavior of semivolatile organic compounds in indoor air. 1. Nicotine in a stainless steel chamber. Environ Sci Technol1997; 31: 2554–2561.
10.
TakigamiHSuzukiGHiraiYSakaiS. Transfer of brominated flame retardants from components into dust inside television cabinets. Chemosphere2008; 73: 161–169.
11.
Guo Z, Liu X, Krebs KA, Greenwell DJ, Roache NF, Stinson RA, Nardin JA and Pope RH. Laboratory study of polychlorinated biphenyl (PCB) contamination and mitigation in buildings ─ Part 2. Transport from primary sources to building materials and settled dust, U.S. EPA, Report EPA/600/R-11/156a, p. 73, http://www.epa.gov/nrmrl/pubs/600r11156a_v2.pdf (2012, accessed 8 August 2014).
12.
Guo Z, Liu X, Krebs KA, Roache NF, Stinson RA, Nardin JA, Pope RH, Mocka CA and Logan RD. Laboratory study of polychlorinated biphenyl (PCB) contamination and mitigation in buildings ─ Part 3. Evaluation of the encapsulation method, U.S. EPA, Report EPA/600-11/156b, p. 34. http://www.epa.gov/nrmrl/pubs/600r11156b_v2.pdf (2012, accessed 8 August 2014).
13.
Schwope AD, Goydan R and Reid RC. Methodology for estimating the migration of additives and impurities from polymeric materials. U.S EPA, Report EPA/560/5-85-015, 1990, p. 148.
14.
BennetCOMyersJE. Momentum, heat, and mass transfer, 3rd ed. New York: McGraw-Hill, 1982, pp. 504–504.
