The objective of this study was to develop an environment-friendly adhesion system for particleboard using tannin-based resin. Tannin-based resin was used in the surface layer of particleboard to replace urea-formaldehyde resins. In addition, the additive with various content ratios in particleboard was evaluated to confirm the effect of formaldehyde reduction performance by the perforator and desiccator methods. As the amount of additive was increased, formaldehyde reduction performance would significantly be increased. Manufactured boards containing additive above 3 wt% in the surface layer satisfied grade SE0 in the results of the desiccator method. The mechanical properties of manufactured boards satisfied the minimum requisite quality standard. This study discussed the effects and possibilities of tannin-based resin to reduce formaldehyde emission in indoor environments.
JamesJPYangX: Emissions of volatile organic compounds from several green and non-green building materials: A comparison: Indoor Built Environ2005;14:69-74.
2.
ZhangYXuY: Characteristics and correlations of VOC emissions from building materials: Int J Heat Mass Transfer2003;46:4877–4883.
3.
YuCWFKimJT: Building pathology, investigation of sick buildings: VOC emissions: Indoor Built Environ2010; 19(1): 30–39.
4.
SinghJYuCWFKimJT: Building pathology, investigation of sick buildings – toxic moulds: Indoor Built Environ2010;19:40–47
5.
IARC: Overall evaluations on carcinogenicity to humans: As evaluated in IARC Monographs, Vol. 1, Lyon, France, International Agency for Research on Cancer, 2004.
6.
NemliGAydınA: Evaluation of the physical and mechanical properties of particleboard made from the needle litter of Pinuspinaster Ait: Industrial Crop Product2007;26:252–258.
7.
PickrellJAMoklerBVGriffisLCHobbsCHBathijaA: Formaldehyde release rate coefficients from selected consumer products: Environ Sci Technol1983;17:753–757.
8.
YuCWFKimJT: Long-term Impact of Formaldehyde and VOC emissions from wood-based products on indoor environments; and issues with recycled products: Indoor Built Environ2012;21:137–149
9.
LeeJHKimS: The determination of the adsorption performance of graphite for VOCs and formaldehyde: Energy Building2012;46:56–61
10.
ChoiDHKangDHYeoMSKimKW: The impact of a non-adhesive floating installation method on emissions and indoor concentrations of VOCs: Indoor Built Environ2010;19:435–443
11.
LeeSKwonGKimJTKimS: A finish material management system for indoor air quality of apartment buildings (FinIAQ): Energy Building2012;46:68–79
12.
KimYLeeJKimS: Effects of double skin envelopes on natural ventilation and heating loads in office buildings: Energy Building2011;43:2118–2126.
13.
KS F 3104: 2002: Particleboards. Korean Standard Association, Seoul, 2006.
14.
VangronsveldEBerckmansSVerbinnenKVan LeeuwCBormansC: Isocyanate and total inhalable particulate air measurements in the European wood panel industry: Int J Hyg Environ Health2010;213:475–488.
15.
TejadoAKortaberriaGPeñaCLabidiJEcheverriaJMMondragonI: Isocyanate curing of novolac-type ligno-phenol–formaldehyde resins: Industrial Crops and Products2008;27:208–213.
16.
BisandaETNAnsellMP: Properties of sisal-CNSL composites: J Mater Sci1992;27:1690–1700.
17.
KimS: Environment-friendly adhesives for surface bonding of wood-based flooring using natural tannin to reduce formaldehyde and TVOC emission: Bioresour Technol2009;100:744–748.
18.
KimS: The reduction of formaldehyde and VOCs emission from wood-based flooring by green adhesive using cashew nut shell liquid (CNSL): J Hazard Mater2010;182:919–922.
19.
CiannameaEMStefaniPMRuseckaiteRA: Medium-density particleboards from modified rice husks and soybean protein concentrate-based adhesives: Bioresour Technol2010;101:818–825.
20.
StefaniPMPeñaCRuseckaiteRAPiterJCMondragonI: Processing conditions analysis of Eucalyptus globulus plywood bonded with resol-tannin adhesives: Bioresour Technol2008;99:5977–5980.
21.
PizziA: Tannin-based wood adhesives: in PizziA (ed): Wood Adhesives Chemistry and Technology. Ch 5, New York, Marcel Dekker Inc., 1994, pp. 149–217.
22.
RoffaelEDixBOkumJ: Use of spruce tannin as a binder in particleboards and medium density fiberboards (MDF): European J Wood Wood Prod2000;58:301–305.
23.
KimSKimH-J: Curing behavior and viscoelastic properties of pine and wattle tannin-based adhesives studied by dynamic mechanical thermal analysis and FT-IR-ATR spectroscopy: J Adhesion Sci Technol2003;17:1369–1383.
24.
TrosaAPizziA: A no-aldehyde emission hardener for tannin-based wood adhesives for exterior panels: Eur J Wood Wood Prod2001;59:266–271.
25.
EN 120:1992: Wood-based panels. Determination of formaldehyde content by extraction method called perforator method. Committee of European Standardisation (CEN), Brussels, September 1993.
26.
KS M 1998: 2009: Determination of the emission rate of formaldehyde and volatile organic compounds in building interior products. Korean Standard Association, Seoul, 2009.
27.
JIS A 1460: Japanese Industrial Standards Association. Tokyo, 2001, Building boards determination of formaldehyde emission desiccator method.
