This paper proposed a design method to enhance the magnetic field intensity of Halbach permanent magnet array. The permanent magnet with oblique magnetization is employed in this design with the optimal magnetization direction, 67.5°, derived via the harmonic model theoretically. Based on this structure, the multi-objective cost function measuring the lifting force and horizontal acceleration ability is constructed. With the boundary element model of MLPM built, the optimal design parameters of the coil and each magnet are determined through the particle swarm optimization algorithm. The simulation test shows that the proposed optimization design method realizes the reduction in manufacturing materials and power consumption under the same payload capacity.
CaoJ.ZhuY.WangJ.YinW.DuanG. (2005). A novel synchronous permanent magnet planar motor and its model for control applications. IEEE Transactions on Magnetics, 41(6), 2156–2163. https://doi.org/10.1109/TMAG.2005.848607
2.
ChenM.HuangH.HungS. (2010). A new design of a submicropositioner utilizing electromagnetic actuators and flexure mechanism. IEEE Transactions on Industrial Electronics, 57(1), 96–106. https://doi.org/10.1109/TIE.2009.2033091
3.
CorbettJ.McKeownP. A.PeggsG. N.WhatmoreR. (2000). Nanotechnology: International developments and emerging products. CIRP Annals, 49(2), 523–545. https://doi.org/10.1016/S0007-8506(07)63454-4
4.
DengZ.ZhangW.ChenY.YangX.XiaC.ZhengJ. (2020). Optimization study of the Halbach permanent magnetic guideway for high temperature superconducting magnetic levitation. Superconductor Science and Technology, 33(3), 034009–034016. https://doi.org/10.1088/1361-6668/ab6ec0
5.
EstevezP.MulderA.SchmidtR. H. M. (2012). 6-DoF miniature maglev positioning stage for application in haptic micro-manipulation. Mechatronics(Oxf), 22(7), 1015–1022. https://doi.org/10.1016/j.mechatronics.2012.08.002
6.
GuoL.ZhangH.GaleaM.LiJ.GeradaC. (2016). Multiobjective optimization of a magnetically levitated planar motor with multilayer windings. IEEE Transactions on Industrial Electronics, 63(6), 3522–3532. https://doi.org/10.1109/TIE.2016.2522389
7.
JangS.YouD.KoK.ChoiS. (2008). Design and experimental evaluation of synchronous machine without iron loss using double-sided Halbach magnetized PM rotor in high power FESS. IEEE Transactions on Magnetics, 44(11), 4337–4340. https://doi.org/10.1109/TMAG.2008.2001499
8.
JansenJ. W.van LieropC. M. M.LomonovaE. A.VandenputA. J. A. (2007). Modeling of magnetically levitated planar actuators with moving magnets. IEEE Transactions on Magnetics, 43(1), 15–25. https://doi.org/10.1109/TMAG.2006.886051
9.
JansenJ. W.van LieropC. M. M.LomonovaE. A.VandenputA. J. A. (2008). Magnetically levitated planar actuator with moving magnets. IEEE Transactions on Industry Applications, 44(4), 1108–1115. https://doi.org/10.1109/TIA.2008.926065
10.
LiM.ZhuY.YangK.YangL.HuC.MuH. (2019). Convergence rate oriented iterative feedback tuning with application to an ultraprecision wafer stage. IEEE Transactions on Industrial Electronics, 66(3), 1993–2003. https://doi.org/10.1109/TIE.2018.2838110
11.
LimJ.LeeK. (2015). Distributed multilevel current models for design analysis of electromagnetic actuators. IEEE/ASME Transactions on Mechatronics, 20(5), 2413–2424. https://doi.org/10.1109/TMECH.2014.2382532
12.
LiuX.DeVorR. E.KapoorS. G.EhmannK. F. (2004). The mechanics of machining at the microscale: Assessment of the current state of the science. Journal of Manufacturing Science and Engineering, 126(4), 666–678. https://doi.org/10.1115/1.1813469
13.
LuX.ZhengT.XuF.XuX. (2019). Semi-analytical solution of magnetic force and torque for a novel magnetically levitated actuator in rotary table. IEEE Transactions on Magnetics, 55(12), 1–8. https://doi.org/10.1109/TMAG.2019.2940423
14.
PengR.ZhengT.LuX.XuX.XuF. (2020). Simulation of a synchronous planar magnetically levitated motion system based on a real-time analytical force model. Energies, 13(23), 6367. https://doi.org/10.3390/en13236367
15.
PoletkinK. V.AsadollahbaikA.KampmannR.KorvinkJ. G. (2018). Levitating micro-actuators: A review. Actuators, 7(2), 17. https://doi.org/10.3390/act7020017
16.
XuF.DinavahiV.XuX. (2016). Parallel computation of wrench model for commutated magnetically levitated planar actuator. IEEE Transactions on Industrial Electronics, 63(12), 7621–7631. https://doi.org/10.1109/TIE.2016.2592866
17.
ZhangX.MehrtashM.KhameseeM. B. (2016). Dual-axial motion control of a magnetic levitation system using Hall-effect sensors. IEEE/ASME Transactions on Mechatronics, 21(2), 1129–1139. https://doi.org/10.1109/TMECH.2015.2479404
18.
ZhengJ.DengZ.LiuW.YeC.LinQ.ZhangY.WangS.WangJ. (2010). An asymmetrical permanent magnet guideway design for the high temperature superconducting Maglev curve. Journal of Superconductivity and Novel Magnetism, 23, 1003–1006. https://doi.org/10.1007/s10948-009-0626-y
19.
ZhengT.XuF.LuX.XuX. (2019). A new multi-objective optimization method of magnetic levitation planar motor. IEEE Transactions on Magnetics, 55(8), 1–8. https://doi.org/10.1109/TMAG.2019.2911606
20.
ZhengT.XuF.LuX.XuX. (2020). Optimization method of magnetic levitation actuator for rotary table. IET Electric Power Applications, 14(2), 893–900. https://doi.org/10.1049/iet-epa.2019.0788
