This study presents a design method for hybrid fiber-reinforced-polymer-steel-reinforced concrete beams by an optimized analysis of the cross section. First, the relationships among the energy consumption, the bearing capacity, and the reinforcement ratio are analyzed; then, the parameters of the cross section are determined. Comparisons between the available theoretical and experimental results show that the designed hybrid fiber-reinforced-polymer-steel-reinforced concrete beams with a low area ratio between the fiber-reinforced polymer and the steel reinforcement could meet the required carrying capacity and exhibited high ductility.
ACI 222R-01 (2001) Protection of metals in concrete against corrosion.
2.
ACI 440:1R-15 (2015) Guide for the design and construction of concrete reinforced with FRP bars.
3.
AielloMAOmbresL (2000) Load-deflection analysis of FRP reinforced concrete flexural members. Journal of Composites for Construction4(4): 164–171.
4.
AielloMAOmbresL (2002) Structural performances of concrete beams with hybrid (fiber-reinforced polymer-steel) reinforcements. Journal of Composites for Construction6(2): 133–140.
5.
ApinisRModniksJTamuzsV, et al. (1998) Ductility of hybrid fiber composite reinforcement FRP for concrete[C]//ECCM-8: European Conference on Composite Materials, Science, Technologies and Applications, Naples, Italy, 3–6 June 1998, pp. 2–89. Cambridge: Woodhead Publishing.
6.
ArabaAMAshourAF (2018) Flexural performance of hybrid GFRP-Steel reinforced concrete continuous beams. Composites Part B: Engineering154: 321–336.
7.
AryaCOforiFKPirathapanG (1995) FRP rebars and the elimination of reinforcement corrosion in concrete structures, non-metallic (FRP) reinforcement in concrete structures. In: TaerweL (ed.) RILEM. London: E&FN Spon, pp. 227–234.
8.
GeWJZhangJWDaiH (2012) Flexural behavior of concrete beam with hybrid reinforcement of FRP bars and steel bars. Journal of Southeast University42(1): 114–119.
9.
HognestadEHansonNWMcHenryD (1955) Concrete stress distribution in ultimate strength design. ACI Journal52(12): 455–479.
LauDPamHJ (2010) Experimental study of reinforced concrete beams. Engineering Structures32: 3857–3865.
12.
LeungHYBalendranRV (2003) Flexural behaviour of concrete beams internally reinforced with GFRP rods and steel rebars. Structural Survey21(4): 146–157.
13.
MuftiAANewhookJPTadrosG (1996) Deformability versus ductility in concrete beams with FRP reinforcement. In: Proceedings of the advanced composite materials in bridges and structures, Montreal, QC, Canada, 11–14 August 1996, pp. 189–199. Montreal, QC, Canada: Canadian Society for Civil Engineering.
14.
NaamanAEJeongSM (1995) Structural ductility of concrete beams prestressed with FRP tendons. In: TaerweL (ed.) Non-Metallic (FRP) Reinforcement for Concretes Structures. London: E & FN Spon, pp. 379–401.
15.
PangLQuWZhuP, et al. (2015) Design propositions for hybrid FRP-steel reinforced concrete beams. Journal of Composites for Construction20(4): 04015086.
16.
ParkRPaulayT (1975) Reinforced Concrete Structures. New York: John Wiley and Sons.
17.
QinRZhouALauD (2017) Effect of reinforcement ratio on the flexural performance of hybrid FRP reinforced concrete beams. Composites Part B: Engineering108: 200–209.
18.
QuWZhangXHuangH (2009) Flexural behavior of concrete beams reinforced with hybrid (GFRP and steel) bars. Journal of Composites for Construction13(5): 350–359.
19.
RashidMAMansurMAParamasivamP (2005) Behavior of aramid fiber-reinforced polymer reinforced high strength concrete beams under bending. Journal of Composites for Construction9(2): 117–127.
20.
SafanMA (2013) Flexural behavior and design of steel-GFRP reinforced concrete beams. ACI Materials Journal110(6): 677–685.
21.
SunZFuLFengDC, et al. (2019) Experimental study on the flexural behavior of concrete beams reinforced with bundled hybrid steel/FRP bars. Engineering Structures197: 109443.
22.
SunZYYangYQinWH, et al. (2012) Experimental study on flexural behavior of concrete beams reinforced by steel-fiber reinforced polymer composite bars. Journal of Reinforced Plastics and Composites31(24): 53–61741.
23.
TanKH (1997) Behaviour of hybrid FRP-steel reinforced concrete beams. In: International symposium; 3rd, non-metallic (FRP) reinforcement for concrete structures (FRPRCS-3), Sapporo, Japan, 14–16 October 1997, pp. 487–494. Sapporo, Japan: Japan Concrete Institute.
24.
ToutanjiHASaafiM (2000) Flexural behavior of concrete beams reinforced with glass fiber-reinforced polymer (GFRP) bars. ACI Structural Journal97(5): 712–719.
25.
YangYWuGWuZS, et al. (2015) Structural performance of ballastless track slabs reinforced with BFRP and SFCB. Composites Part B: Engineering71: 103–112.
26.
ZhangXZhangSNiuS (2019) Experimental studies on seismic behavior of precast hybrid steel-concrete beam. Advances in Structural Engineering22(3): 670–686.
27.
ZouPXW (2003) Flexural behavior and deformability of fiber reinforced polymer prestressed concrete beams. Journal of Composites for Construction7(4): 275–284.
