This article experimentally investigates the cyclic behavior of ultra high performance concrete–filled steel tube beam-columns. A total of eight specimens were tested. The considered parameters were the axial load ratio and steel ratio. The results showed that all ultra high performance concrete–filled steel tube beam-columns had a very good cyclic behavior without significant pinching. Increasing the axial load ratio results in the decrease of strength and ductility, but it has no obvious influence on the initial flexural stiffness. Reducing the steel ratio results in the decrease of the strength, stiffness and ductility, and energy dissipation capacity.
AydinSBaradanB (2013) Engineering properties of reactive powder concrete without portland cement. ACI Materials Journal110(6): 619–627.
2.
BonneauOLachemiMDallaireE, et al. (1997) Mechanical properties and durability of two industrial reactive powder concretes. ACI Materials Journal94(4): 286–289.
3.
FamAQieFSRizkallaS (2004) Concrete-filled steel tubes subjected to axial compression and lateral cyclic loads. Journal of Structural Engineering130(4): 631–640.
4.
GeHUsamiT (1996) Cyclic tests of concrete-filled steel box columns. Journal of Structural Engineering122(10): 1169–1170.
5.
GulerSÇopurAAydoganM (2013) Axial capacity and ductility of circular UHPC-filled steel tube columns. Magazine of Concrete Research65(15): 898–905.
6.
HanLH (2007) Concrete Filled Steel Tubular Structures—Theory and Practice. Beijing, China: Science Press (in Chinese).
7.
HanLHYangYF (2005) Cyclic performance of concrete-filled steel CHS columns under flexural loading. Journal of Constructional Steel Research61(4): 423–452.
8.
HanLHYangYFTaoZ (2003) Concrete-filled thin-walled steel SHS and RHS beam-columns subjected to cyclic loading. Thin-Walled Structures41(9): 801–833.
9.
HassanAKawakamiM (2005) Steel-free composite slabs made of reactive powder materials and fiber-reinforced concrete. ACI Structural Journal102(5): 709–718.
10.
LiaoFYHanLHTaoZ (2009) Seismic behaviour of circular CFST columns and RC shear wall mixed structures: experiments. Journal of Constructional Steel Research65(8–9): 1582–1596.
11.
LiaoFYHanLHTaoZ (2014) Behaviour of composite joints with concrete encased CFST columns under cyclic loading: experiments. Engineering Structures59(2): 745–764.
12.
LiewJYRXiongDX (2010) Experimental investigation on tubular columns infilled with ultra-high strength concrete. In: Tubular structures XIII—proceedings of the 13th international symposium on tubular structures, Hong Kong, China, 15–17 December, pp. 637–645. Boca Raton, FL: CRC Press.
13.
LopezJASernaPCamachoE, et al. (2014) First ultra-high-performance fibre-reinforced concrete footbridge in Spain: design and construction. Structural Engineering International24(1): 101–104.
ParkJWHongYKChoiSM (2010) Behaviors of concrete filled square steel tubes confined by carbon fiber sheets (CFS) under compression and cyclic loads. Steel & Composite Structures10(2): 187–205.
16.
PortolésJMSerraERomeroML (2013) Influence of ultra-high strength infill in slender concrete-filled steel tubular columns. Journal of Constructional Steel Research86(7): 107–114.
17.
SavinoVLanzoniLTarantinoAM, et al. (2018) Simple and effective models to predict the compressive and tensile strength of HPFRC as the steel fiber content and type changes. Composites Part B: Engineering137: 153–162.
18.
WangJZhangLSpencerBFJr (2013) Seismic response of extended end plate joints to concrete-filled steel tubular columns. Engineering Structures49(2): 876–892.
19.
YazıcıHYardımcıMYYiğiterH, et al. (2010) Mechanical properties of reactive powder concrete containing high volumes of ground granulated blast furnace slag. Cement & Concrete Composites32(8): 639–648.
