This article describes the use of fibre reinforced polymer composites to increase the strength of an isotropic metallic cylindrical shell against elephant’s foot buckling. This form of buckling occurs when a cylindrical shell structure is subjected to high internal pressure together with an axial force, such as those that may occur in tanks and silos. It is particularly relevant to tanks under seismic action. Although fibre reinforced polymer composites have been widely applied to different types of structures under several loading conditions, its use to strengthen thin steel cylindrical shells has been very limited. Here, a non-linear elasto-plastic finite element idealisation is used to explore the strengthening effect of a fibre reinforced polymer strip on a thin cylinder. The optimum size and position of the fibre reinforced polymer sheet were obtained and empirically formulated. This study has shown that the strength after repair is sensitive to minor changes in the fibre reinforced polymer parameters so that a close adherence to the optimum parameter values is very desirable.
ABAQUS Inc. (2012) ABAQUS/Standard User’s Manual Version 612-1. Palo Alto, CA: ABAQUS Inc.
2.
BatikhaMChenJFRotterJM (2007a) Numerical modelling of shells repaired using FRP. In: Proceedings of 3rd international conference on steel and composites structures (ICSCS 07), Manchester, 30 July–1 August, pp. 1065–1069. Taylor & Francis.
3.
BatikhaMChenJFRotterJM (2007b) FRP strengthening of metallic cylindrical shells against elephant’s foot buckling. In: Proceedings of the conference on advanced composites in construction (ACIC 07), Bath, 2–4 April, pp. 157–164. The University of Bath.
4.
BatikhaMChenJFRotterJMet al. (2009) Strengthening metallic cylindrical shells against elephant’s foot buckling with FRP. Thin-Walled Structures47: 1078–1091.
5.
CaoQSZhaoYZhangR (2018) Wind induced buckling of large circular steel silos with various slenderness. Thin-Walled Structures130: 101–113.
6.
ChenJFRotterJMTengJG (2005) Strengthening silos and tanks against elephant’s foot buckling. In: Proceedings of 4th international conference on advances in steel structures (ICASS 05), Shanghai, China, 13–15 June, pp. 459–466. Amsterdam: Elsevier.
7.
ChenJFRotterJMTengJG (2006) A simple remedy for elephant’s foot buckling in cylindrical silos and tanks. Advances in Structural Engineering9(3): 409–420.
8.
DjermaneMZaouiDLabbaciBet al. (2014) Dynamic buckling of steel tanks under seismic excitation: numerical evaluation of code provisions. Engineering Structures70: 181–196.
9.
EN 1993-1-6 (2007) Eurocode 3: design of steel structures – part 1-6: strength and stability of shell structures.
10.
EN 1993-4-1 (2007) Eurocode 3: design of steel structures – part 4-1: silos.
11.
EN 1998-4 (2006) Eurocode 8: design of structures for earthquake resistance – part 4: silos, tanks and pipelines.
12.
European Convention for Constructional Steelwork (ECCS) (2008) Buckling of Steel Shells – European Design Recommendations. 5th ed.Brussels: ECCS.
13.
KildashtiKMirzadehNSamaliB (2018) Seismic vulnerability assessment of a case study anchored liquid storage tank by considering fixed and flexible base restraints. Thin-Walled Structures123: 382–394.
NZS/BS 2654:1989 (1989) Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt-welded shells for the petroleum industry.
16.
Punitha KumarASenthilR (2016a) Axial behaviour of CFRP-strengthened circular steel hollow sections. Arabian Journal for Science and Engineering41: 3841–3850.
17.
Punitha KumarASenthilR (2016b) Behavior of CFRP strengthened CHS under axial static and axial cyclic loading. KSCE Journal of Civil Engineering20(4): 1493–1500.
18.
RiksE (1979) An incremental approach to the solution of snapping and buckling problems. International Journal of Solids and Structures15(7): 529–551.
19.
RotterJM (1985a) Bending theory of shells for bins and silos. In: GaylordEH (ed.) Design of Steel Bins for the Storage of Bulk Solids. Sydney, NSW, Australia: School of Civil and Mining Engineering, The University of Sydney, pp. 71–81.
20.
RotterJM (1985b) Buckling of ground-supported cylindrical steel bins under vertical compressive wall loads. In: Proceedings of metal structures conference, Melbourne, NSW, Australia, 23–24 May 1985, pp. 112–127. Barton, ACT, Australia: Institution of Engineers Australia.
21.
RotterJM (1989) Stress amplification in unstiffened cylindrical steel silos and tanks. Civil Engineering TransactionsCE31(3): 142–148.
22.
RotterJM (1990) Local collapse of axially compressed pressurized thin steel cylinders. Journal of Structural Engineering116(7): 1955–1969.
23.
RotterJM (2004) Cylindrical shells under axial compression. In: TengJGRotterJM (eds) Buckling of Thin Metal Shells. London: Spon Press, pp. 42–87.
RotterJMTengJG (1989) Elastic stability of cylindrical shells with weld depressions. Journal of Structural Engineering115(5): 1244–1263.
26.
RotterJMZhangQ (1990) Elastic buckling of imperfect cylinders containing granular solids. Journal of Structural Engineering116(8): 2253–2271.
27.
SobhanaMSFRRofooeiaFRAttariNKA (2017) Buckling behavior of the anchored steel tanks under horizontal and vertical ground motions using static pushover and incremental dynamic analyses. Thin-Walled Structures112: 173–183.
28.
TengJGChenJF (2009) Mechanics of debonding in FRP-plated RC beams. Proceedings of the Institution of Civil Engineers: Structures and Buildings162(SB5): 335–345.
29.
TengJGHuYM (2004) Suppression of local buckling in steel tubes by FRP jacketing. In: Proceedings of the 2nd international conference on FRP composites in civil engineering, Adelaide, SA, Australia, 8–10 December, pp. 749–753.
30.
TengJGHuYM (2007) Behaviour of FRP-jacketed circular steel tubes and cylindrical shells under axial comparison. Construction and Building Materials21(4): 827–838.
31.
TengJGRotterJM (1992) Buckling of pressurized axisymmetrically imperfect cylinders under axial loads. Journal of Engineering Mechanics118(2): 229–247.
TengJGYubTFernandoD (2012) Strengthening of steel structures with fiber-reinforced polymer composites. Journal of Constructional Steel Research78: 131–143.
34.
TimoshenkoSWoinowsky-KriegerS (1959) Theory of Plates and Shells. New York: McGraw-Hill Education.
35.
ZhaoYCaoQSSuL (2013) Buckling design of large circular steel silos subject to wind pressure. Thin-Walled Structures73: 337–349.
36.
ZhuCYZhaoYHSunL (2018) Seismic performance of FRP-reinforced concrete-filled thin-walled steel tube considering local buckling. Journal of Reinforced Plastics and Composites37(9): 592–608.
