Hysteresis behavior of traditional timber structures by full-scale tests

Abstract

To study the seismic response of a traditional timber structure in China, a full-scale model capturing the main characteristics of a representative ancient Chinese wooden structure in Song Dynasty (960–1279 AD) was established and tested considering three different levels of vertical loads, which is one-story sophisticated timber structure consisting of four columns and Dou-gong sets. A swing column was used to apply the synchronous horizontal force. Tests under the low-cyclic loading were performed considering three levels of vertical load to reveal the hysteretic behavior of the historic buildings. Based on the observed characteristics from restoring forces, the ancient wooden structure appears to have a good ductility despite of its low inherent energy dissipation capability. Based on the test results, the following relationships are established: loads versus displacements with key turning points, the loads at the key points versus the roof weights, the displacements at the key points with the column diameter, and structural stiffness versus ductility. Finally, a limiting value of drift angle for structural design and the equivalent viscous damping and ductility factor for dynamical response analysis are proposed.

Keywords

equivalent viscous damping factor hysteretic behavior pinching effect synchronous horizontal force traditional timber structure

Get full access to this article

View all access options for this article.

References

Branco

Araújo

(2012) Structural behaviour of log timber walls under lateral in-plane loads. Engineering Structures 40: 371–382.

Chang

Thomson

Harris

et al . (2011) Development of all-wood connections with plywood flitch plate and oak pegs. Advances in Structural Engineering 14(14): 123–132.

Construction Science Research Institute of Sichuan Province (1993) Ancient Wood Structure Maintenance and Reinforcement Technique Specification. Beijing, China: China Building Industry Press (in Chinese).

D’Ayala

Tsai

(2008) Seismic vulnerability of historic Dieh–Dou timber structures in Taiwan. Engineering Structures 30(8): 2101–2113.

Feio

Lourenço

Machado

(2014) Testing and modeling of a traditional timber mortise and tenon joint. Materials and Structures 47(1–2): 213–225.

Harrer

(2010) Fan-shaped bracket sets and their application in religious timber architecture of Shanxi province. PhD Thesis, University of Pennsylvania, Philadelphia, PA.

Kitamor

Jung

Hassel

et al . (2010) Mechanical analysis of lateral loading behavior on Japanese traditional frame structure depending on the vertical load. In: Proceedings of the 11th world conference on timber engineering (WCTE), Trento, 20–24June.

Zhao

et al . (2015) Experimental study on the seismic performance of a double-span traditional timber frame. Engineering Structures 98: 141–150.

Luo

(2006) Study on the mechanics characteristic and seismic behavior of ancient timber buildings frame assembled with mortise-and-tenon joints. Master’s Thesis, Xi’an University of Architecture and Technology, Xi’an, China (in Chinese).

10.

Suda

Tasiro

Suzuki

et al . (2012) Seismic reinforcement for traditional wooden frame by improving restoring force due to column rocking. In: Proceedings of the world conference on timber engineering (WCTE), Auckland, New Zealand, 15–19 July.

11.

Sui

Zhao

Xue

et al . (2010) A study on Chinese ancient timber structures by shaking table test. Journal of Building Structures 2: 35–40 (in Chinese).

12.

Suzuki

Maeno

(2006) Structural mechanism of traditional wooden frames by dynamic and static tests. Structural Control & Health Monitoring 13(1): 508–522.

13.

Tanahashi

Suzuki

(2010) Elasto-plastic Pasternak model simulation of static and dynamic loading tests of traditional wooden frames. In: Proceedings of the 11th world conference on timber engineering (WCTE), Trento, 20–24 June.

14.

Tsai

(2009) Seismic evaluation of traditional timber structures in Taiwan. PhD Thesis, University of Bath, Bath.

15.

Vieux-Champagne

Sieffert

Grange

et al . (2014) Experimental analysis of seismic resistance of timber-framed structures with stones and earth infill. Engineering Structures 69: 102–115.

16.

Qiu

(2010) Experimental study on seismic behavior of mortise-tenon joints in Chinese ancient timber buildings. Journal of Building StructuresS2: 345–349 (in Chinese).

17.

Yeo

Hsu

Komatsu

et al . (2015) Shaking table test of the Taiwanese traditional Dieh-Dou timber frame. International Journal of Architectural Heritage 10(5): 539–557.

18.

Yuan

Chen

Wang

et al . (2011) Experimental research on bracket set models of Yingxian Timber Pagoda. Journal of Building Structures 7: 66–72 (in Chinese).

19.

Zhao

Zhang

Xue

et al . (2011) Conceptual design thoughts of Chinese ancient timber buildings. Journal of Xi’an University of Architecture & Technology 43(4): 457–463 (in Chinese).