The feasibility of friction stir welding (FSW) with a simple spherical tool, which has neither a shoulder nor a probe, was studied. The spherical tool allows for localised welding with narrow weld widths and extended tool life but tends to generate flashes and weld thinning. The material flow around the spherical tool during FSW of the aluminium alloys was observed in detail, and the flash generation behaviour was discussed. As a result, a new FSW method in which a spherical tool tilted to the retreating side (RS) was developed, and by expanding the flow path of the leading surface on the RS, the flow of hot material was controlled to reduce flash and smooth the weld surface.
Reza-E-rabbyMReynoldsAP. Effect of tool pin thread forms on friction stir weldability of different aluminum alloys. Procedia Eng2014; 90: 637–642.
5.
ZhangYNCaoXLaroseS, et al.Review of tools for friction stir welding and processing. Can Metall Q2012; 51: 250–261.
6.
GuishenYXinCZitaoW, et al.Effect of tool groove features on the microstructure and tensile‒shear mechanical performances of probeless friction stir spot welds. Int J Adv Manuf Technol2022; 121: 1837–1850.
7.
TruebaLHerediaGRybickiD, et al.Effect of tool shoulder features on defects and tensile properties of friction stir welded aluminum 6061-T6. J Mater Process Technol2015; 219: 271–277.
8.
YouJZhaoYDongC, et al.Microstructural evolution and mechanical properties of the Al–Cu dissimilar joint enhanced by stationary-dynamic shoulder friction stir welding. J Mater Process Technol2022; 300: 117402.
9.
MiaoHMiuraTJiangW, et al.Effect of shoulder fillet radius on welds in bobbin tool friction stir welding of A1050. Metals (Basel)2022; 12: 1993.
10.
LiYSunDGongW. Effect of tool rotational speed on the microstructure and mechanical properties of bobbin tool friction stir welded 6082-T6 aluminum alloy. Metals (Basel)2019; 9: 894.
11.
LiuZGuanWLiH, et al.Study on the relationship between welding force and defects in bobbin tool friction stir welding. J Manuf Process2022; 84: 1122–1132.
12.
MatsushitaMKitaniYIkedaR, et al.Development of friction stir welding of high strength steel sheet. Sci Technol Weld Join2011; 16: 181–187.
13.
OhishiK. Development of tool durability for friction stir welding. Mater Jpn2021; 60: 82–88.
14.
SatoAHirano SAotaK. The joining of the thin plates by friction stir welding. J Jpn Weld Soc2015; 84: 189–192.
15.
AroraAMehtaMDeA, et al. Load bearing capacity of tool pin during friction stir welding. Int J Adv Manuf Technol2012; 61: 911–920.
16.
DebroyTDeABhadeshiaHKDH, et al.Tool durability maps for friction stir welding of an aluminum alloy. Proc R Soc A: Math Phys Eng Sci2012; 468: 3552–3570.
17.
SunYFKonishiYKamaiM, et al.Microstructure and mechanical properties of S45C steel prepared by laser-assisted friction stir welding. Mater Des2013; 47: 842–849.
18.
CampanelliSLCasalinoGCasavolaC, et al.Analysis and comparison of friction stir welding and laser assisted friction stir welding of aluminum alloy. Materials2013; 6: 5923–5941.
19.
WadaTMorisadaYSunY, et al.Friction stir welding of medium carbon steel with laser-preheating. ISIJ Int2020; 60: 153–159.
20.
ÁlvarezAICidVPenaG, et al. Assisted friction stir welding of carbon steel: Use of induction and laser as preheating techniques. In: MishraRMahoneyMWSatoY, et al. (eds) Friction stir welding and processing VII. Cham: Springer International Publishing, 2016, pp.117–126.
21.
MorisadaYTamashiroKKamaiM, et al.Development of small sized friction stir welding equipment for hand operated welding. Sci Technol Weld Join2015; 20: 249–253.
22.
TiwariAPankajPSumanS, et al.Effect of plasma preheating on weld quality and tool life during friction stir welding of DH36 steel. Proc IMechE, Part B: J Engineering Manufacture2021; 235: 1458–1472.
23.
AotaKIkeuchiK. Friction stir welding of aluminum lap joint by tool without probe. Weld Int2010; 24: 197–205.
24.
HossfeldM. Shoulderless friction stir welding: a low-force solid-state keyhole joining technique for deep welding of labile structures. Prod Eng2022; 16: 389–399.
25.
LiNWuLHLiZK, et al.Achieving superior superplasticity in CoCrFeNiCu high entropy alloy via friction stir processing with an improved convex tool. Mater Sci Eng A2023; 873: 145034.
