Abstract
This paper proposes an improved lumped parameter method for calculating the static characteristics of multi-recess hydrostatic journal bearings. The improved lumped parameter method can estimate the total pressure distribution in the circumferential direction by introducing control volume in the middle of each inter-recess land, and utilizing the flow continuity equations for each recess and each control volume with the assumption that the pressure distributions are parabolic on the inter-recess land. Then the recess pressure and the fluid film force can be calculated. The calculation accuracy of the improved lumped parameter method and the traditional lumped parameter method is comparatively discussed under different eccentricity ratios and wrap angles of the recess. The results show that the improved lumped parameter method has higher calculation accuracy and wider application range.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
