Sage Journals: Discover world-class research

Abstract

The erosion behavior of three WC-Co-Cr coatings obtained by high velocity oxy-fuel/air-fuel (HVOF/HVAF) thermal spray systems has been investigated using Al₂O₃ as erodent at four impingement angles (15°, 45°, 75°, 90°) and 90 m/s impact velocity. The results indicate that the micro-cutting and coatings spallation are main erosion mechanisms for coatings, and the proportion of the two mechanisms changes depending on the impingement angle. The ranking of the coatings in terms of erosion resistance is very much dependent on the microstructure of coatings. The behavior of formation and propagation of cracks also depends on the microstructure of coatings, and has been understood in terms of schematic diagrams.

Keywords

Erosion behavior WC-Co-Cr coatings erosion mechanisms cracks microstructure

Get full access to this article

View all access options for this article.

References

Thakur

Arora

. A comparative study on slurry and dry erosion behavior of HVOF sprayed WC-CoCr coatings. Wear 2013; 303: 405–411.

Barbezat

. Advanced thermal spray technology and coating for lightweight engine blocks for the automotive industry. Surf Coat Tech 2005; 200: 1990–1993.

Tan

Looney

Hashmi

MSJ

. Component repair using HVOF thermal spraying. J Mater Process Tech 1999; 92–93: 203–208.

Ramesh

Prakash

Nath

. Solid particle erosion of HVOF sprayed WC-Co/NiCrFeSiB coatings. Wear 2010; 269: 197–205.

Jafari

Enayati

Salehi

. Comparison between oxidation kinetics of HVOF sprayed WC-12Co and WC-10Co-4Cr coatings. Int J Refract Met Hard Mater 2013; 41: 78–84.

Stewart

Shipway

McCartney

. Abrasive wear behaviour of conventional and nanocomposite HVOF-sprayed WC-Co coatings. Wear 1999; 225–229: 789–798.

Kleis I and Kulu P. Solid particle erosion. Occurrence, predictions and Control, London: Springer, 2008.

Movahedi

. Fracture toughness and wear behavior of NiAl-based nanocomposite HVOF coatings. Surf Coat Tech 2013; 235: 212–219.

López Cantera

Mellor

. Fracture toughness and crack morphologies in eroded WC-Co-Cr thermally sprayed coatings. Mater Lett 1998; 37: 201–210.

10.

Sobolev

Guilemany

. Formation of chemical inhomogeneity in the coating structure during high velocity oxy-fuel (HVOF) spraying. Mater Lett 1995; 25: 285–289.

11.

Levy

Wang

. Erosion of hard material coatings systems. Wear 1988; 121: 325–346.

12.

Hong

Zhang

. Microstructure and cavitation erosion behavior of WC-Co-Cr coating on 1Cr18Ni9Ti stainless steel by HVOF thermal spraying. Int J Refract Met Hard Mater 2012; 32: 21–26.

13.

Hawthorne

Arsenault

Immarigeon

. Comparison of slurry and dry erosion behaviour of some HVOF thermal sprayed coatings. Wear 1999; 225–229: 825–834.

14.

Liang

. Evaluation of abradability of porous seal materials in a single-pendulum scratch device. Wear 1994; 177: 167–173.

15.

Babu

Basu

Sundararajan

. Processing-structure-property correlation and decarburization phenomenon in detonation sprayed WC-12Co coatings. Acta Mater 2008; 56: 5012–5026.

16.

ASTM: G 76. Standard practice for conducting erosion tests by solid particle impingement using gas jets, West Conshohocken: ASTM International, 1983, pp. 305–309.

Solid particle erosion behavior of HVOF/HVAF sprayed WC-Co-Cr coatings

Abstract

Keywords

Get full access to this article

References