Sage Journals: Discover world-class research

Abstract

In this work, a parametric study of a lubricated textured contact is carried out using a numerical model. The model solves the Reynolds equation coupled with a mass-conserving cavitation algorithm, and addresses the hydrodynamic lubrication of a mechanical seal with textured surfaces. Three shapes of texture (square, spherical cap, and triangle) are used, and the effect of the aspect ratio is also discussed for the case involving a triangular dimple. In order to estimate quantitatively the discretization error, the grid convergence index method is applied, considering several operating parameters (leakage, cavitation, load-carrying capacity) and using three grid levels: coarse (100 × 100), medium (200 × 200), and fine (400 × 400). As could be expected, grid convergence index analysis showed that there was a reduction in the discretization error when the grid system was refined. However, the study also showed that medium grid (200 × 200) solution has a grid convergence index of <6%. Comparison between fine and medium mesh densities, with regard to accuracy and computational time requirements, indicated that a medium mesh density was appropriate in the case of the present program, since the computational time is reduced by a factor of 9 when compared with the highest mesh density. Moreover, the size of the optimal mesh also depends on the operating conditions. The higher the lubrication number, the higher the number of nodes.

Keywords

Textured surfaces numerical model mechanical seal hydrodynamic lubrication grid convergence

Get full access to this article

View all access options for this article.

References

Etsion

. State of the art in laser surface texturing. Trans ASME 2005; 127: 248–253.

Hamilton

Walowit

Allen

. A theory of lubrication by micro-irregularities. ASME J Basic Eng T 1966; 88: 177–185.

Etsion

Burstein

. A model for mechanical seals with regular microsurface structure. Tribol T 1996; 39: 677–683.

Etsion

Kligerman

Halperin

. Analytical and experimental investigation of laser-textured mechanical seal faces. Tribol T 1999; 42: 511–516.

Qiu

Khonsari

. On the prediction of cavitation in dimples using a mass-conservative algorithm. ASME J Tribol 2009; 131: 041702–041711.

Ali MS, Doolan CJ and Wheatley V. Grid convergence study for a two dimensional simulation of flow around a square cylinder at a low Reynolds number. In: Seventh International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia, 9–11 December, 2009.

Arghir

Roucou

Helene

. Theoretical analysis of the incompressible laminar flow in a macro-roughness cell. ASME J Tribol 2003; 125: 309–318.

Dobrica

Fillon

. Thermohydrodynamic behavior of a slider pocket bearing. ASME J Tribol 2006; 128: 312–318.

Cupillard S, Cervantes MJ and Glavatskih S. A CFD study of a finite textured journal bearing. In: 24 th Symposium on Hydraulic Machinery and Systems, Fouz do Iguaçu, Brazil, 27–31 October, 2008.

10.

Cupillard S, Cervantes MJ and Glavatskih S. Thermal analysis of lubricant flow in a textured inlet contact. In: The 19th International Symposium on Transport Phenomena, ICELAND, 17–20 August, 2008.

11.

Qiu

Delic

Raeymaekers

. The effect of texture shape on the load-carrying capacity of gas-lubricated parallel slider bearings. Tribol Lett 2012; 48: 315–327.

12.

Celik

Ghia

Roche

. Procedure for estimation and reporting of uncertainty due to discretization in CFD applications. ASME J Fluid Eng 2008; 130: 1–4.

13.

Roache

. Perspective: a method for uniform reporting of grid refinement studies. ASME J Fluid Eng 1994; 116: 405–413.

14.

Kwaśniewski

. Application of grid convergence index in FE computation. Bull Polish Acad Sci, Tech Sci 2013; 61: 123–128.

15.

Elrod

. A cavitation algorithm. J Lubr Technol 1981; 103: 350–354.

16.

Payvar

Salant

. A computational method for cavitation in a wavy mechanical seal. ASME J Tribol 1992; 114: 199–204.

17.

Minet

Brunetière

Tournerie

. A deterministic mixed lubrication model for mechanical seals. ASME J Tribol 2011; 133: 042203–042211.

18.

Brunetière

Tournerie

. Numerical analysis of a surface-textured mechanical seal operating in mixed lubrication regime. Tribol Int 2012; 49: 80–89.

19.

Zhang

Meng

. Direct observation of cavitation phenomenon and hydrodynamic lubrication analysis of textured surfaces. Tribol Lett 2012; 46: 147–158.

20.

Roy

. Review of code and solution verification procedures for computational. J Comput Phys 2005; 205: 131–156.

21.

Oberkampf

Roy

. Verification and validation in scientific computing, Cambridge: Cambridge University Press, 2010.

22.

Phillips TS. Residual methods for discretization error estimation. In: Presented at 20th AIAA Computational Fluid Dynamics Conference 27--30, Honolulu, Hawaii, June 2011.

23.

Richardson

. The approximate arithmetical solution by ﬁnite diﬀerences of physical problems involving differential equations with an application to the stresses in a masonry dam. Trans Royal Society London 1910; 210: 307–357.

24.

Ainsworth

Oden

. A posteriori error estimation in finite element analysis. Comput Method Appl M 1997; 142: 1–88.

25.

Fehlberg E. Low-order classical Runge-Kutta formulas with step size control and their application to some heat transfer problems. In: NASA Technical Report 315, National Aeronautics and Space Administration, July 1969.

26.

Richards

. Completed Richardson extrapolation in space and time. Commun Num Meth Eng 1997; 13: 573–582.

27.

Zienkiewicz

Zhu

. The super convergent patch recovery and a posteriori error estimates, Part 2: error estimates and adaptivity. Int J Num Meth Eng 1992; 33: 1365–1382.

28.

Zhang

Trepanier

Camarero

. A posteriori error estimation for finite-volume solutions of hyperbolic conservation laws. Comput Method Appl M 2000; 185: 1–19.

29.

Babuska

Rheinboldt

. Error estimates for adaptive finite element computations. SIAM J Numer Anal 1978; 15: 736–754.

30.

Pierce

Giles

. Adjoint recovery of super convergent functionals from PDE approximations. SIAM Rev 2000; 42: 247–264.

31.

Roy CJ. Review of discretization error estimators in scientific computing. In: Presented at the 48th AIA Aerospace Sciences Meeting, 4--7, Orlando, Florida, January 2010.

32.

Cadafalch

Perez-Segarra

Consul

. Verification of finite volume computations on steady-state fluid flow and heat transfer. ASME J Fluid Eng 2002; 124: 11–21.

33.

Stern

Wilson

Shao

. Quantitative V&V of CFD simulations and certification of CFD codes. Int J Numer Meth Fluids 2006; 50: 1335–1355.

34.

Xing T and Stern F. Factors of safety for Richardson extrapolation. IIHR Technical Report No. 469, March 2009, The University of Iowa, Iowa City.

35.

Eca

Hoekstra

. Evaluation of numerical error estimation based on grid refinement studies with the method of manufactured solutions. Comput Fluids 2009; 38: 1580–1591.

36.

Roache

. Verification and validation in computational science engineering, New Mexico: Hermosa Publishers, 1998.

37.

Celik

Karatekin

. Numerical experiments on application of Richardson extrapolation with no uniform grids. ASME J Fluid Eng 1997; 119: 584–590.

Optimization of mesh density for numerical simulations of hydrodynamic lubrication considering textured surfaces

Abstract

Keywords

Get full access to this article

References